Merge branch 'master' of lab.las3.de:lwc/compare

e16525dc · Enrico Pozzobon · bd967720 · 10755269 · e16525dc · e16525dc
Commit e16525dc authored Jun 18, 2020 by Enrico Pozzobon
Hide whitespace changes
Inline Side-by-side

Showing with 879 additions and 867 deletions

templates/f7/.mxproject
+4 -4

templates/f7/Makefile
+199 -199

templates/f7/Src/main.c
+422 -416

templates/f7/f7.ioc
+254 -248

No files found.
--- a/templates/f7/.mxproject
+++ b/templates/f7/.mxproject
 [PreviousGenFiles]
-HeaderPath=/home/enrico/Projects/lwc-compare/templates/f7/Inc
+HeaderPath=/home/enrico/Projects/lw-crypto-compare/templates/f7/Inc
 HeaderFiles=stm32f7xx_it.h;stm32f7xx_hal_conf.h;main.h;stm32_assert.h;
-SourcePath=/home/enrico/Projects/lwc-compare/templates/f7/Src
+SourcePath=/home/enrico/Projects/lw-crypto-compare/templates/f7/Src
 SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c;
 [PreviousLibFiles]
-LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/mpu_armv7.h;
+LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_armv8mml.h;
 [PreviousUsedMakefileFiles]
 SourceFiles=Src/main.c;Src/stm32f7xx_it.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;;
 HeaderPath=Drivers/STM32F7xx_HAL_Driver/Inc;Drivers/CMSIS/Device/ST/STM32F7xx/Include;Drivers/CMSIS/Include;Inc;
-CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:0;ART_ACCLERATOR_ENABLE:0;STM32F746xx;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;
+CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:1;ART_ACCLERATOR_ENABLE:1;STM32F746xx;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;
--- a/templates/f7/Makefile
+++ b/templates/f7/Makefile
 ##########################################################################################################################
-# File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Fri May 01 19:54:41 CEST 2020] 
+# File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Thu Jun 18 14:36:16 CEST 2020] 
 ##########################################################################################################################
 # ------------------------------------------------
 # Generic Makefile (based on gcc)
 #
 # ChangeLog :
 #	2017-02-10 - Several enhancements + project update mode
 #   2015-07-22 - first version
 # ------------------------------------------------
 ######################################
 # target
 ######################################
 TARGET = f7
 ######################################
 # building variables
 ######################################
 # debug build?
 DEBUG = 0
 # optimization
 OPT = -O3
 #######################################
 # paths
 #######################################
 # Build path
 BUILD_DIR = build
 ######################################
 # source
 ######################################
 # C sources
 C_SOURCES =  \
 Src/main.c \
 Src/stm32f7xx_it.c \
 Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c \
 Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c \
 Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c \
 Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c \
 Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c \
 Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c \
 Src/system_stm32f7xx.c \
 Src/test.c \
 Src/uartp.c \
 $(SRC_FILES)
 # ASM sources
 ASM_SOURCES =  \
 startup_stm32f746xx.s \
 $(ASM_FILES)
 #######################################
 # binaries
 #######################################
 PREFIX = arm-none-eabi-
 # The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
 # either it can be added to the PATH environment variable.
 ifdef GCC_PATH
 CC = $(GCC_PATH)/$(PREFIX)gcc
 AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
 CP = $(GCC_PATH)/$(PREFIX)objcopy
 SZ = $(GCC_PATH)/$(PREFIX)size
 else
 CC = $(PREFIX)gcc
 AS = $(PREFIX)gcc -x assembler-with-cpp
 CP = $(PREFIX)objcopy
 SZ = $(PREFIX)size
 endif
 HEX = $(CP) -O ihex
 BIN = $(CP) -O binary -S
 #######################################
 # CFLAGS
 #######################################
 # cpu
 CPU = -mcpu=cortex-m7
 # fpu
 FPU = -mfpu=fpv5-sp-d16
 # float-abi
 FLOAT-ABI = -mfloat-abi=hard
 # mcu
 MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
 # macros for gcc
 # AS defines
 AS_DEFS = 
 # C defines
 C_DEFS =  \
 -DUSE_FULL_LL_DRIVER \
 -DHSE_VALUE=8000000 \
 -DHSE_STARTUP_TIMEOUT=100 \
 -DLSE_STARTUP_TIMEOUT=5000 \
 -DLSE_VALUE=32768 \
 -DEXTERNAL_CLOCK_VALUE=12288000 \
 -DHSI_VALUE=16000000 \
 -DLSI_VALUE=32000 \
 -DVDD_VALUE=3300 \
-DPREFETCH_ENABLE=0 \
+-DSTM32F746xx \
-DART_ACCLERATOR_ENABLE=0 \
+-DNDEBUG \
-DSTM32F746xx \
+-UDEBUG \
-DNDEBUG \
+-DPREFETCH_ENABLE=1 \
-UDEBUG
+-DART_ACCLERATOR_ENABLE=1
 # AS includes
 AS_INCLUDES = 
 # C includes
 C_INCLUDES =  \
 -IInc \
 -IDrivers/STM32F7xx_HAL_Driver/Inc \
 -IDrivers/CMSIS/Device/ST/STM32F7xx/Include \
 -IDrivers/CMSIS/Include
 # compile gcc flags
 ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
 CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
 ifeq ($(DEBUG), 1)
 CFLAGS += -g -gdwarf-2
 endif
 # Generate dependency information
 CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
 #######################################
 # LDFLAGS
 #######################################
 # link script
 LDSCRIPT = STM32F746ZGTx_FLASH.ld
 # libraries
 LIBS = -lc -lm -lnosys 
 LIBDIR = 
 LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
 # default action: build all
 all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
 #######################################
 # build the application
 #######################################
 # list of objects
 OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
 vpath %.c $(sort $(dir $(C_SOURCES)))
 # list of ASM program objects
 ASM_OBJS=$(ASM_SOURCES:.S=.o)
 OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_OBJS:.s=.o)))
 vpath %.s $(sort $(dir $(ASM_SOURCES)))
 $(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR) 
 	$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
 $(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
 	$(AS) -c $(CFLAGS) $< -o $@
 $(BUILD_DIR)/%.o: %.S Makefile | $(BUILD_DIR)
 	$(AS) -c $(CFLAGS) $< -o $@
 $(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
 	$(CC) $(OBJECTS) $(LDFLAGS) -o $@
 	$(SZ) $@
 $(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
 	$(HEX) $< $@
 $(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
 	$(BIN) $< $@	
 $(BUILD_DIR):
 	mkdir $@		
 #######################################
 # clean up
 #######################################
 clean:
 	-rm -fR $(BUILD_DIR)
 #######################################
 # dependencies
 #######################################
 -include $(wildcard $(BUILD_DIR)/*.d)
 # *** EOF ***
--- a/templates/f7/Src/main.c
+++ b/templates/f7/Src/main.c
 /* USER CODE BEGIN Header */
 /**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
 /* USER CODE END Header */
 /* Includes ------------------------------------------------------------------*/
 #include "main.h"
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
 #include "test.h"
 /* USER CODE END Includes */
 /* Private typedef -----------------------------------------------------------*/
 /* USER CODE BEGIN PTD */
 /* USER CODE END PTD */
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN PD */
 /* USER CODE END PD */
 /* Private macro -------------------------------------------------------------*/
 /* USER CODE BEGIN PM */
 /* USER CODE END PM */
 /* Private variables ---------------------------------------------------------*/
 /* USER CODE BEGIN PV */
 /* USER CODE END PV */
 /* Private function prototypes -----------------------------------------------*/
 void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
 static void MX_USART2_UART_Init(void);
 static void MX_USART3_UART_Init(void);
 /* USER CODE BEGIN PFP */
 /* USER CODE END PFP */
 /* Private user code ---------------------------------------------------------*/
 /* USER CODE BEGIN 0 */
 /* USER CODE END 0 */
 /**
  * @brief  The application entry point.
  * @retval int
  */
 int main(void)
 {
  /* USER CODE BEGIN 1 */
  /* USER CODE END 1 */
-  /* MCU Configuration--------------------------------------------------------*/
+  /* Enable I-Cache---------------------------------------------------------*/
+  SCB_EnableICache();
-  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  /* Enable D-Cache---------------------------------------------------------*/
+  SCB_EnableDCache();
-  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
-  LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
+  /* MCU Configuration--------------------------------------------------------*/
-  NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-  /* System interrupt init*/
+  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
-  /* USER CODE BEGIN Init */
+  LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
-  /* USER CODE END Init */
+  NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
-  /* Configure the system clock */
+  /* System interrupt init*/
-  SystemClock_Config();
+  /* USER CODE BEGIN Init */
-  /* USER CODE BEGIN SysInit */
+  /* USER CODE END Init */
-  /* USER CODE END SysInit */
+  /* Configure the system clock */
-  /* Initialize all configured peripherals */
+  SystemClock_Config();
-  MX_GPIO_Init();
-  MX_USART2_UART_Init();
+  /* USER CODE BEGIN SysInit */
-  MX_USART3_UART_Init();
-  /* USER CODE BEGIN 2 */
+  /* USER CODE END SysInit */
-  test_setup();
-  /* USER CODE END 2 */
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
-  /* Infinite loop */
+  MX_USART2_UART_Init();
-  /* USER CODE BEGIN WHILE */
+  MX_USART3_UART_Init();
-  while (1)
+  /* USER CODE BEGIN 2 */
-  {
+  test_setup();
-    test_loop();
+  /* USER CODE END 2 */
-    /* USER CODE END WHILE */
+  /* Infinite loop */
-    /* USER CODE BEGIN 3 */
+  /* USER CODE BEGIN WHILE */
-  }
+  while (1)
-  /* USER CODE END 3 */
+  {
-}
+    test_loop();
+    /* USER CODE END WHILE */
-/**
-  * @brief System Clock Configuration
+    /* USER CODE BEGIN 3 */
-  * @retval None
+  }
-  */
+  /* USER CODE END 3 */
-void SystemClock_Config(void)
+}
-{
-  LL_FLASH_SetLatency(LL_FLASH_LATENCY_7);
+/**
+  * @brief System Clock Configuration
-  if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_7)
+  * @retval None
-  {
+  */
-  Error_Handler();  
+void SystemClock_Config(void)
-  }
+{
-  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_7);
-  LL_PWR_EnableOverDriveMode();
-  LL_RCC_HSE_EnableBypass();
+  if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_7)
-  LL_RCC_HSE_Enable();
+  {
+  Error_Handler();  
-   /* Wait till HSE is ready */
+  }
-  while(LL_RCC_HSE_IsReady() != 1)
+  LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
-  {
+  LL_PWR_EnableOverDriveMode();
+  LL_RCC_HSE_EnableBypass();
-  }
+  LL_RCC_HSE_Enable();
-  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_4, 216, LL_RCC_PLLP_DIV_2);
-  LL_RCC_PLL_Enable();
+   /* Wait till HSE is ready */
+  while(LL_RCC_HSE_IsReady() != 1)
-   /* Wait till PLL is ready */
+  {
-  while(LL_RCC_PLL_IsReady() != 1)
-  {
+  }
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_4, 216, LL_RCC_PLLP_DIV_2);
-  }
+  LL_RCC_PLL_Enable();
-  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
-  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_4);
+   /* Wait till PLL is ready */
-  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_2);
+  while(LL_RCC_PLL_IsReady() != 1)
-  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+  {
-   /* Wait till System clock is ready */
+  }
-  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
-  {
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_4);
+  LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_2);
-  }
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
-  LL_Init1msTick(216000000);
-  LL_SetSystemCoreClock(216000000);
+   /* Wait till System clock is ready */
-  LL_RCC_SetUSARTClockSource(LL_RCC_USART2_CLKSOURCE_PCLK1);
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
-  LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK1);
+  {
-}
+  }
-/**
+  LL_Init1msTick(216000000);
-  * @brief USART2 Initialization Function
+  LL_SetSystemCoreClock(216000000);
-  * @param None
+  LL_RCC_SetUSARTClockSource(LL_RCC_USART2_CLKSOURCE_PCLK1);
-  * @retval None
+  LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK1);
-  */
+}
-static void MX_USART2_UART_Init(void)
-{
+/**
+  * @brief USART2 Initialization Function
-  /* USER CODE BEGIN USART2_Init 0 */
+  * @param None
+  * @retval None
-  /* USER CODE END USART2_Init 0 */
+  */
+static void MX_USART2_UART_Init(void)
-  LL_USART_InitTypeDef USART_InitStruct = {0};
+{
-  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+  /* USER CODE BEGIN USART2_Init 0 */
-  /* Peripheral clock enable */
+  /* USER CODE END USART2_Init 0 */
-  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2);
+  LL_USART_InitTypeDef USART_InitStruct = {0};
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
-  /**USART2 GPIO Configuration  
+  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
-  PD5   ------> USART2_TX
-  PD6   ------> USART2_RX 
+  /* Peripheral clock enable */
-  */
+  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2);
-  GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+  /**USART2 GPIO Configuration  
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  PD5   ------> USART2_TX
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  PD6   ------> USART2_RX 
-  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
+  */
-  LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+  GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
-  GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
-  LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+  GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
-  /* USART2 interrupt Init */
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
-  NVIC_SetPriority(USART2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  NVIC_EnableIRQ(USART2_IRQn);
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
-  /* USER CODE BEGIN USART2_Init 1 */
+  LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-  /* USER CODE END USART2_Init 1 */
+  /* USART2 interrupt Init */
-  USART_InitStruct.BaudRate = 115200;
+  NVIC_SetPriority(USART2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
-  USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
+  NVIC_EnableIRQ(USART2_IRQn);
-  USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
-  USART_InitStruct.Parity = LL_USART_PARITY_NONE;
+  /* USER CODE BEGIN USART2_Init 1 */
-  USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
-  USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+  /* USER CODE END USART2_Init 1 */
-  USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
+  USART_InitStruct.BaudRate = 115200;
-  LL_USART_Init(USART2, &USART_InitStruct);
+  USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
-  LL_USART_ConfigAsyncMode(USART2);
+  USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
-  LL_USART_Enable(USART2);
+  USART_InitStruct.Parity = LL_USART_PARITY_NONE;
-  /* USER CODE BEGIN USART2_Init 2 */
+  USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
+  USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
-  /* USER CODE END USART2_Init 2 */
+  USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
+  LL_USART_Init(USART2, &USART_InitStruct);
-}
+  LL_USART_ConfigAsyncMode(USART2);
+  LL_USART_Enable(USART2);
-/**
+  /* USER CODE BEGIN USART2_Init 2 */
-  * @brief USART3 Initialization Function
-  * @param None
+  /* USER CODE END USART2_Init 2 */
-  * @retval None
-  */
+}
-static void MX_USART3_UART_Init(void)
-{
+/**
+  * @brief USART3 Initialization Function
-  /* USER CODE BEGIN USART3_Init 0 */
+  * @param None
+  * @retval None
-  /* USER CODE END USART3_Init 0 */
+  */
+static void MX_USART3_UART_Init(void)
-  LL_USART_InitTypeDef USART_InitStruct = {0};
+{
-  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+  /* USER CODE BEGIN USART3_Init 0 */
-  /* Peripheral clock enable */
+  /* USER CODE END USART3_Init 0 */
-  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3);
+  LL_USART_InitTypeDef USART_InitStruct = {0};
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
-  /**USART3 GPIO Configuration  
+  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
-  PD8   ------> USART3_TX
-  PD9   ------> USART3_RX 
+  /* Peripheral clock enable */
-  */
+  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3);
-  GPIO_InitStruct.Pin = STLK_RX_Pin;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+  /**USART3 GPIO Configuration  
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  PD8   ------> USART3_TX
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  PD9   ------> USART3_RX 
-  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
+  */
-  LL_GPIO_Init(STLK_RX_GPIO_Port, &GPIO_InitStruct);
+  GPIO_InitStruct.Pin = STLK_RX_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
-  GPIO_InitStruct.Pin = STLK_TX_Pin;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(STLK_RX_GPIO_Port, &GPIO_InitStruct);
-  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
-  LL_GPIO_Init(STLK_TX_GPIO_Port, &GPIO_InitStruct);
+  GPIO_InitStruct.Pin = STLK_TX_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
-  /* USER CODE BEGIN USART3_Init 1 */
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  /* USER CODE END USART3_Init 1 */
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  USART_InitStruct.BaudRate = 115200;
+  GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
-  USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
+  LL_GPIO_Init(STLK_TX_GPIO_Port, &GPIO_InitStruct);
-  USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
-  USART_InitStruct.Parity = LL_USART_PARITY_NONE;
+  /* USER CODE BEGIN USART3_Init 1 */
-  USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
-  USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+  /* USER CODE END USART3_Init 1 */
-  USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
+  USART_InitStruct.BaudRate = 115200;
-  LL_USART_Init(USART3, &USART_InitStruct);
+  USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
-  LL_USART_ConfigAsyncMode(USART3);
+  USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
-  LL_USART_Enable(USART3);
+  USART_InitStruct.Parity = LL_USART_PARITY_NONE;
-  /* USER CODE BEGIN USART3_Init 2 */
+  USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
+  USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
-  /* USER CODE END USART3_Init 2 */
+  USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
+  LL_USART_Init(USART3, &USART_InitStruct);
-}
+  LL_USART_ConfigAsyncMode(USART3);
+  LL_USART_Enable(USART3);
-/**
+  /* USER CODE BEGIN USART3_Init 2 */
-  * @brief GPIO Initialization Function
-  * @param None
+  /* USER CODE END USART3_Init 2 */
-  * @retval None
-  */
+}
-static void MX_GPIO_Init(void)
-{
+/**
-  LL_EXTI_InitTypeDef EXTI_InitStruct = {0};
+  * @brief GPIO Initialization Function
-  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+  * @param None
+  * @retval None
-  /* GPIO Ports Clock Enable */
+  */
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC);
+static void MX_GPIO_Init(void)
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOH);
+{
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB);
+  LL_EXTI_InitTypeDef EXTI_InitStruct = {0};
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
+  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOG);
-  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
+  /* GPIO Ports Clock Enable */
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC);
-  /**/
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOH);
-  LL_GPIO_ResetOutputPin(LD1_GPIO_Port, LD1_Pin);
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB);
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
-  /**/
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOG);
-  LL_GPIO_ResetOutputPin(LD3_GPIO_Port, LD3_Pin);
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
  /**/
-  LL_GPIO_ResetOutputPin(USB_PowerSwitchOn_GPIO_Port, USB_PowerSwitchOn_Pin);
+  LL_GPIO_ResetOutputPin(LD1_GPIO_Port, LD1_Pin);
  /**/
-  LL_GPIO_ResetOutputPin(LD2_GPIO_Port, LD2_Pin);
+  LL_GPIO_ResetOutputPin(LD3_GPIO_Port, LD3_Pin);
  /**/
-  LL_GPIO_SetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
+  LL_GPIO_ResetOutputPin(USB_PowerSwitchOn_GPIO_Port, USB_PowerSwitchOn_Pin);
  /**/
-  LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTC, LL_SYSCFG_EXTI_LINE13);
+  LL_GPIO_ResetOutputPin(LD2_GPIO_Port, LD2_Pin);
  /**/
-  EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_13;
+  LL_GPIO_SetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
-  EXTI_InitStruct.LineCommand = ENABLE;
-  EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
+  /**/
-  EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_RISING;
+  LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTC, LL_SYSCFG_EXTI_LINE13);
-  LL_EXTI_Init(&EXTI_InitStruct);
+  /**/
-  /**/
+  EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_13;
-  LL_GPIO_SetPinPull(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_PULL_NO);
+  EXTI_InitStruct.LineCommand = ENABLE;
+  EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
-  /**/
+  EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_RISING;
-  LL_GPIO_SetPinMode(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_MODE_INPUT);
+  LL_EXTI_Init(&EXTI_InitStruct);
  /**/
-  GPIO_InitStruct.Pin = LD1_Pin;
+  LL_GPIO_SetPinPull(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_PULL_NO);
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  /**/
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  LL_GPIO_SetPinMode(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_MODE_INPUT);
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  LL_GPIO_Init(LD1_GPIO_Port, &GPIO_InitStruct);
+  /**/
+  GPIO_InitStruct.Pin = LD1_Pin;
-  /**/
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
-  GPIO_InitStruct.Pin = LD3_Pin;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  LL_GPIO_Init(LD1_GPIO_Port, &GPIO_InitStruct);
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  LL_GPIO_Init(LD3_GPIO_Port, &GPIO_InitStruct);
+  /**/
+  GPIO_InitStruct.Pin = LD3_Pin;
-  /**/
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
-  GPIO_InitStruct.Pin = USB_PowerSwitchOn_Pin;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  LL_GPIO_Init(LD3_GPIO_Port, &GPIO_InitStruct);
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  LL_GPIO_Init(USB_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct);
+  /**/
+  GPIO_InitStruct.Pin = USB_PowerSwitchOn_Pin;
-  /**/
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
-  GPIO_InitStruct.Pin = USB_OverCurrent_Pin;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  LL_GPIO_Init(USB_OverCurrent_GPIO_Port, &GPIO_InitStruct);
+  LL_GPIO_Init(USB_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct);
  /**/
-  GPIO_InitStruct.Pin = CRYPTO_BUSY_Pin;
+  GPIO_InitStruct.Pin = USB_OverCurrent_Pin;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  LL_GPIO_Init(USB_OverCurrent_GPIO_Port, &GPIO_InitStruct);
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  LL_GPIO_Init(CRYPTO_BUSY_GPIO_Port, &GPIO_InitStruct);
+  /**/
+  GPIO_InitStruct.Pin = CRYPTO_BUSY_Pin;
-  /**/
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
-  GPIO_InitStruct.Pin = LD2_Pin;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
-  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  LL_GPIO_Init(CRYPTO_BUSY_GPIO_Port, &GPIO_InitStruct);
-  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-  LL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
+  /**/
+  GPIO_InitStruct.Pin = LD2_Pin;
-}
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
-/* USER CODE BEGIN 4 */
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
-/* USER CODE END 4 */
+  LL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
-/**
+}
-  * @brief  This function is executed in case of error occurrence.
-  * @retval None
+/* USER CODE BEGIN 4 */
-  */
-void Error_Handler(void)
+/* USER CODE END 4 */
-{
-  /* USER CODE BEGIN Error_Handler_Debug */
+/**
-  /* User can add his own implementation to report the HAL error return state */
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
-  /* USER CODE END Error_Handler_Debug */
+  */
-}
+void Error_Handler(void)
+{
-#ifdef  USE_FULL_ASSERT
+  /* USER CODE BEGIN Error_Handler_Debug */
-/**
+  /* User can add his own implementation to report the HAL error return state */
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
+  /* USER CODE END Error_Handler_Debug */
-  * @param  file: pointer to the source file name
+}
-  * @param  line: assert_param error line source number
-  * @retval None
+#ifdef  USE_FULL_ASSERT
-  */
+/**
-void assert_failed(uint8_t *file, uint32_t line)
+  * @brief  Reports the name of the source file and the source line number
-{ 
+  *         where the assert_param error has occurred.
-  /* USER CODE BEGIN 6 */
+  * @param  file: pointer to the source file name
-  /* User can add his own implementation to report the file name and line number,
+  * @param  line: assert_param error line source number
-     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  * @retval None
-  /* USER CODE END 6 */
+  */
-}
+void assert_failed(uint8_t *file, uint32_t line)
-#endif /* USE_FULL_ASSERT */
+{ 
+  /* USER CODE BEGIN 6 */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/templates/f7/f7.ioc
+++ b/templates/f7/f7.ioc
 #MicroXplorer Configuration settings - do not modify
-Mcu.Family=STM32F7
+CORTEX_M7.ART_ACCLERATOR_ENABLE=1
-ProjectManager.MainLocation=Src
+CORTEX_M7.CPU_DCache=Enabled
-RCC.MCOFreq_Value=72000000
+CORTEX_M7.CPU_ICache=Enabled
-RCC.USART1Freq_Value=108000000
+CORTEX_M7.IPParameters=PREFETCH_ENABLE,CPU_ICache,CPU_DCache,ART_ACCLERATOR_ENABLE
-RCC.SAI1Freq_Value=192000000
+CORTEX_M7.PREFETCH_ENABLE=1
-USART2.IPParameters=VirtualMode-Asynchronous
+File.Version=6
-RCC.CortexFreq_Value=216000000
+GPIO.groupedBy=Group By Peripherals
-RCC.TIM17Freq_Value=72000000
+KeepUserPlacement=true
-PG6.Signal=GPIO_Output
+Mcu.Family=STM32F7
-ProjectManager.KeepUserCode=true
+Mcu.IP0=CORTEX_M7
-Mcu.UserName=STM32F746ZGTx
+Mcu.IP1=NVIC
-PD9.GPIOParameters=GPIO_Label
+Mcu.IP2=RCC
-PG6.Locked=true
+Mcu.IP3=SYS
-RCC.PLLCLKFreq_Value=216000000
+Mcu.IP4=USART2
-PB14.GPIO_Label=LD3 [Red]
+Mcu.IP5=USART3
-PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
+Mcu.IPNb=6
-PA14.GPIO_Label=TCK
+Mcu.Name=STM32F746ZGTx
-RCC.PLLQCLKFreq_Value=144000000
+Mcu.Package=LQFP144
-RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
+Mcu.Pin0=PC13
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_USART2_UART_Init-USART2-false-LL-true,4-MX_USART3_UART_Init-USART3-false-LL-true,5-MX_CORTEX_M7_Init-CORTEX_M7-false-LL-true
+Mcu.Pin1=PC14/OSC32_IN
-PD8.Locked=true
+Mcu.Pin10=PG7
-RCC.RTCFreq_Value=32000
+Mcu.Pin11=PA13
-PD6.Locked=true
+Mcu.Pin12=PA14
-PB0.GPIO_Label=LD1 [Green]
+Mcu.Pin13=PA15
-PC14/OSC32_IN.Mode=LSE-External-Oscillator
+Mcu.Pin14=PD5
-RCC.PLLI2SRCLKFreq_Value=192000000
+Mcu.Pin15=PD6
-RCC.USART2Freq_Value=54000000
+Mcu.Pin16=PD7
-PC13.GPIO_Label=USER_Btn [B1]
+Mcu.Pin17=PB3
-PD9.Mode=Asynchronous
+Mcu.Pin18=PB4
-PinOutPanel.RotationAngle=0
+Mcu.Pin19=PB7
-RCC.MCO1PinFreq_Value=16000000
+Mcu.Pin2=PC15/OSC32_OUT
-RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+Mcu.Pin20=VP_SYS_VS_Systick
-ProjectManager.StackSize=0x400
+Mcu.Pin3=PH0/OSC_IN
-SH.GPXTI13.0=GPIO_EXTI13
+Mcu.Pin4=PH1/OSC_OUT
-USART3.VirtualMode-Asynchronous=VM_ASYNC
+Mcu.Pin5=PB0
-RCC.I2C3Freq_Value=54000000
+Mcu.Pin6=PB14
-RCC.LPTIM1Freq_Value=54000000
+Mcu.Pin7=PD8
-Mcu.IP4=USART2
+Mcu.Pin8=PD9
-RCC.FCLKCortexFreq_Value=216000000
+Mcu.Pin9=PG6
-Mcu.IP5=USART3
+Mcu.PinsNb=21
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+Mcu.ThirdPartyNb=0
-Mcu.IP2=RCC
+Mcu.UserConstants=
-Mcu.IP3=SYS
+Mcu.UserName=STM32F746ZGTx
-Mcu.IP0=CORTEX_M7
+MxCube.Version=5.6.0
-Mcu.IP1=NVIC
+MxDb.Version=DB.5.0.60
-Mcu.UserConstants=
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-RCC.SDMMCFreq_Value=216000000
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-SH.GPXTI13.ConfNb=1
+NVIC.ForceEnableDMAVector=true
-Mcu.ThirdPartyNb=0
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-PH0/OSC_IN.Mode=HSE-External-Clock-Source
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-RCC.HCLKFreq_Value=216000000
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-RCC.I2C4Freq_Value=54000000
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-Mcu.IPNb=6
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-RCC.I2SClocksFreq_Value=48000000
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-RCC.PLLI2SRoutputFreq_Value=192000000
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
-ProjectManager.PreviousToolchain=
+NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
-RCC.APB2TimFreq_Value=216000000
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-RCC.SPDIFRXFreq_Value=192000000
+PA13.GPIOParameters=GPIO_Label
-RCC.VcooutputI2S=48000000
+PA13.GPIO_Label=TMS
-PH1/OSC_OUT.Signal=RCC_OSC_OUT
+PA13.Locked=true
-PD8.GPIOParameters=GPIO_Label
+PA13.Mode=Serial_Wire
-Mcu.Pin6=PB14
+PA13.Signal=SYS_JTMS-SWDIO
-RCC.SAI2Freq_Value=192000000
+PA14.GPIOParameters=GPIO_Label
-PD8.Signal=USART3_TX
+PA14.GPIO_Label=TCK
-Mcu.Pin7=PD8
+PA14.Locked=true
-Mcu.Pin8=PD9
+PA14.Mode=Serial_Wire
-Mcu.Pin9=PG6
+PA14.Signal=SYS_JTCK-SWCLK
-RCC.VCOSAIOutputFreq_Value=384000000
+PA15.Locked=true
-RCC.AHBFreq_Value=216000000
+PA15.Signal=SYS_JTDI
-RCC.TIM2Freq_Value=72000000
+PB0.GPIOParameters=GPIO_Label
-Mcu.Pin0=PC13
+PB0.GPIO_Label=LD1 [Green]
-Mcu.Pin1=PC14/OSC32_IN
+PB0.Locked=true
-PD5.Mode=Asynchronous
+PB0.Signal=GPIO_Output
-Mcu.Pin2=PC15/OSC32_OUT
+PB14.GPIOParameters=GPIO_Label
-Mcu.Pin3=PH0/OSC_IN
+PB14.GPIO_Label=LD3 [Red]
-RCC.USART3Freq_Value=54000000
+PB14.Locked=true
-Mcu.Pin4=PH1/OSC_OUT
+PB14.Signal=GPIO_Output
-Mcu.Pin5=PB0
+PB3.Locked=true
-RCC.PLLSAIRCLKFreq_Value=192000000
+PB3.Signal=SYS_JTDO-SWO
-ProjectManager.ProjectBuild=false
+PB4.Locked=true
-RCC.HSE_VALUE=8000000
+PB4.Signal=SYS_JTRST
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+PB7.GPIOParameters=GPIO_Label
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+PB7.GPIO_Label=LD2 [Blue]
-USART2.VirtualMode-Asynchronous=VM_ASYNC
+PB7.Locked=true
-NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+PB7.Signal=GPIO_Output
-RCC.PLLMUL=RCC_PLL_MUL9
+PC13.GPIOParameters=GPIO_Label
-PD7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
+PC13.GPIO_Label=USER_Btn [B1]
-PH0/OSC_IN.Locked=true
+PC13.Locked=true
-ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.16.0
+PC13.Signal=GPXTI13
-MxDb.Version=DB.5.0.60
+PC14/OSC32_IN.Locked=true
-PB0.GPIOParameters=GPIO_Label
+PC14/OSC32_IN.Mode=LSE-External-Oscillator
-ProjectManager.BackupPrevious=false
+PC14/OSC32_IN.Signal=RCC_OSC32_IN
-RCC.VCOInputFreq_Value=2000000
+PC15/OSC32_OUT.Locked=true
-PA14.Mode=Serial_Wire
+PC15/OSC32_OUT.Mode=LSE-External-Oscillator
-PH1/OSC_OUT.Locked=true
+PC15/OSC32_OUT.Signal=RCC_OSC32_OUT
-File.Version=6
+PD5.Mode=Asynchronous
-PB7.Signal=GPIO_Output
+PD5.Signal=USART2_TX
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+PD6.Locked=true
-PC15/OSC32_OUT.Locked=true
+PD6.Mode=Asynchronous
-PH1/OSC_OUT.Mode=HSE-External-Clock-Source
+PD6.Signal=USART2_RX
-ProjectManager.HalAssertFull=false
+PD7.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
-PB0.Locked=true
+PD7.GPIO_Label=CRYPTO_BUSY
-ProjectManager.ProjectName=f7
+PD7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
-RCC.TIM1Freq_Value=72000000
+PD7.Locked=true
-PD7.GPIO_Label=CRYPTO_BUSY
+PD7.PinState=GPIO_PIN_SET
-PA13.GPIOParameters=GPIO_Label
+PD7.Signal=GPIO_Output
-RCC.PLLMCOFreq_Value=72000000
+PD8.GPIOParameters=GPIO_Label
-PB7.GPIO_Label=LD2 [Blue]
+PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
-RCC.MCO2PinFreq_Value=216000000
+PD8.Locked=true
-Mcu.Package=LQFP144
+PD8.Mode=Asynchronous
-RCC.TIM15Freq_Value=72000000
+PD8.Signal=USART3_TX
-RCC.ADC34outputFreq_Value=72000000
+PD9.GPIOParameters=GPIO_Label
-PC14/OSC32_IN.Signal=RCC_OSC32_IN
+PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
-PA14.Locked=true
+PD9.Locked=true
-ProjectManager.ToolChainLocation=
+PD9.Mode=Asynchronous
-RCC.LSI_VALUE=32000
+PD9.Signal=USART3_RX
-VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+PG6.GPIOParameters=GPIO_Label
-USART3.IPParameters=VirtualMode-Asynchronous
+PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
-PA15.Signal=SYS_JTDI
+PG6.Locked=true
-PB14.GPIOParameters=GPIO_Label
+PG6.Signal=GPIO_Output
-RCC.TIM16Freq_Value=72000000
+PG7.GPIOParameters=GPIO_Label
-RCC.APB2CLKDivider=RCC_HCLK_DIV2
+PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
-RCC.CECFreq_Value=32786.88524590164
+PG7.Locked=true
-RCC.APB1TimFreq_Value=108000000
+PG7.Signal=GPIO_Input
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+PH0/OSC_IN.GPIOParameters=GPIO_Label
-PD6.Signal=USART2_RX
+PH0/OSC_IN.GPIO_Label=MCO [STM32F103CBT6_PA8]
-ProjectManager.CustomerFirmwarePackage=
+PH0/OSC_IN.Locked=true
-RCC.PLLSAIQCLKFreq_Value=192000000
+PH0/OSC_IN.Mode=HSE-External-Clock-Source
-PB3.Locked=true
+PH0/OSC_IN.Signal=RCC_OSC_IN
-PB4.Signal=SYS_JTRST
+PH1/OSC_OUT.Locked=true
-RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
+PH1/OSC_OUT.Mode=HSE-External-Clock-Source
-RCC.I2SFreq_Value=192000000
+PH1/OSC_OUT.Signal=RCC_OSC_OUT
-RCC.PLLQoutputFreq_Value=144000000
+PinOutPanel.RotationAngle=0
-ProjectManager.ProjectFileName=f7.ioc
+ProjectManager.AskForMigrate=true
-RCC.ADC12outputFreq_Value=72000000
+ProjectManager.BackupPrevious=false
-PG7.Locked=true
+ProjectManager.CompilerOptimize=6
-PG7.Signal=GPIO_Input
+ProjectManager.ComputerToolchain=false
-RCC.UART7Freq_Value=54000000
+ProjectManager.CoupleFile=false
-PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
+ProjectManager.CustomerFirmwarePackage=
-Mcu.PinsNb=21
+ProjectManager.DefaultFWLocation=true
-ProjectManager.NoMain=false
+ProjectManager.DeletePrevious=true
-PC13.Locked=true
+ProjectManager.DeviceId=STM32F746ZGTx
-PC13.Signal=GPXTI13
+ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.16.0
-PD7.Signal=GPIO_Output
+ProjectManager.FreePins=false
-ProjectManager.DefaultFWLocation=true
+ProjectManager.HalAssertFull=false
-PD5.Signal=USART2_TX
+ProjectManager.HeapSize=0x200
-PD9.Signal=USART3_RX
+ProjectManager.KeepUserCode=true
-ProjectManager.DeletePrevious=true
+ProjectManager.LastFirmware=true
-RCC.UART8Freq_Value=54000000
+ProjectManager.LibraryCopy=0
-PB14.Locked=true
+ProjectManager.MainLocation=Src
-RCC.APB1CLKDivider=RCC_HCLK_DIV4
+ProjectManager.NoMain=false
-RCC.LCDTFToutputFreq_Value=96000000
+ProjectManager.PreviousToolchain=
-boardIOC=true
+ProjectManager.ProjectBuild=false
-PD6.Mode=Asynchronous
+ProjectManager.ProjectFileName=f7.ioc
-NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+ProjectManager.ProjectName=f7
-RCC.FamilyName=M
+ProjectManager.StackSize=0x400
-PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
+ProjectManager.TargetToolchain=Makefile
-RCC.WatchDogFreq_Value=32000
+ProjectManager.ToolChainLocation=
-PA13.Signal=SYS_JTMS-SWDIO
+ProjectManager.UnderRoot=false
-PA15.Locked=true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_USART2_UART_Init-USART2-false-LL-true,4-MX_USART3_UART_Init-USART3-false-LL-true,5-MX_CORTEX_M7_Init-CORTEX_M7-false-LL-true
-ProjectManager.TargetToolchain=Makefile
+RCC.48MHZClocksFreq_Value=24000000
-RCC.USART6Freq_Value=108000000
+RCC.ADC12outputFreq_Value=72000000
-PB7.GPIOParameters=GPIO_Label
+RCC.ADC34outputFreq_Value=72000000
-RCC.USBFreq_Value=144000000
+RCC.AHBFreq_Value=216000000
-RCC.PLLSAIoutputFreq_Value=192000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV4
-PD7.Locked=true
+RCC.APB1Freq_Value=54000000
-PD8.Mode=Asynchronous
+RCC.APB1TimFreq_Value=108000000
-RCC.VCOI2SOutputFreq_Value=384000000
+RCC.APB2CLKDivider=RCC_HCLK_DIV2
-PB14.Signal=GPIO_Output
+RCC.APB2Freq_Value=108000000
-PG6.GPIOParameters=GPIO_Label
+RCC.APB2TimFreq_Value=216000000
-PD7.PinState=GPIO_PIN_SET
+RCC.CECFreq_Value=32786.88524590164
-RCC.PLLSAIPCLKFreq_Value=192000000
+RCC.CortexFreq_Value=216000000
-board=NUCLEO-F746ZG
+RCC.EthernetFreq_Value=216000000
-RCC.VCOOutputFreq_Value=432000000
+RCC.FCLKCortexFreq_Value=216000000
-ProjectManager.LastFirmware=true
+RCC.FamilyName=M
-RCC.VCOOutput2Freq_Value=8000000
+RCC.HCLKFreq_Value=216000000
-PH0/OSC_IN.Signal=RCC_OSC_IN
+RCC.HSE_VALUE=8000000
-RCC.APB2Freq_Value=108000000
+RCC.HSI_VALUE=16000000
-RCC.TIM8Freq_Value=72000000
+RCC.I2C1Freq_Value=54000000
-RCC.UART4Freq_Value=54000000
+RCC.I2C2Freq_Value=54000000
-MxCube.Version=5.6.0
+RCC.I2C3Freq_Value=54000000
-RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
+RCC.I2C4Freq_Value=54000000
-RCC.I2C1Freq_Value=54000000
+RCC.I2SClocksFreq_Value=48000000
-RCC.PLLI2SPCLKFreq_Value=192000000
+RCC.I2SFreq_Value=192000000
-PC13.GPIOParameters=GPIO_Label
+RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
-PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
+RCC.LCDTFToutputFreq_Value=96000000
-RCC.RNGFreq_Value=144000000
+RCC.LPTIM1Freq_Value=54000000
-VP_SYS_VS_Systick.Mode=SysTick
+RCC.LSI_VALUE=32000
-RCC.EthernetFreq_Value=216000000
+RCC.MCO1PinFreq_Value=16000000
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+RCC.MCO2PinFreq_Value=216000000
-RCC.UART5Freq_Value=54000000
+RCC.MCOFreq_Value=72000000
-PA13.Mode=Serial_Wire
+RCC.PLLCLKFreq_Value=216000000
-ProjectManager.FreePins=false
+RCC.PLLI2SPCLKFreq_Value=192000000
-RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
+RCC.PLLI2SQCLKFreq_Value=192000000
-ProjectManager.AskForMigrate=true
+RCC.PLLI2SRCLKFreq_Value=192000000
-Mcu.Name=STM32F746ZGTx
+RCC.PLLI2SRoutputFreq_Value=192000000
-RCC.PLLI2SQCLKFreq_Value=192000000
+RCC.PLLM=4
-RCC.RTCHSEDivFreq_Value=4000000
+RCC.PLLMCOFreq_Value=72000000
-PA13.GPIO_Label=TMS
+RCC.PLLMUL=RCC_PLL_MUL9
-ProjectManager.UnderRoot=false
+RCC.PLLN=216
-ProjectManager.CoupleFile=false
+RCC.PLLQ=3
-RCC.48MHZClocksFreq_Value=24000000
+RCC.PLLQCLKFreq_Value=144000000
-PB4.Locked=true
+RCC.PLLQoutputFreq_Value=144000000
-PB3.Signal=SYS_JTDO-SWO
+RCC.PLLSAIPCLKFreq_Value=192000000
-RCC.SYSCLKFreq_VALUE=216000000
+RCC.PLLSAIQCLKFreq_Value=192000000
-Mcu.Pin20=VP_SYS_VS_Systick
+RCC.PLLSAIRCLKFreq_Value=192000000
-NVIC.ForceEnableDMAVector=true
+RCC.PLLSAIoutputFreq_Value=192000000
-KeepUserPlacement=true
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
-PA14.GPIOParameters=GPIO_Label
+RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
-PC14/OSC32_IN.Locked=true
+RCC.RNGFreq_Value=144000000
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+RCC.RTCFreq_Value=32000
-PA13.Locked=true
+RCC.RTCHSEDivFreq_Value=4000000
-PC15/OSC32_OUT.Mode=LSE-External-Oscillator
+RCC.SAI1Freq_Value=192000000
-ProjectManager.CompilerOptimize=6
+RCC.SAI2Freq_Value=192000000
-PA14.Signal=SYS_JTCK-SWCLK
+RCC.SDMMCFreq_Value=216000000
-ProjectManager.HeapSize=0x200
+RCC.SPDIFRXFreq_Value=192000000
-Mcu.Pin15=PD6
+RCC.SYSCLKFreq_VALUE=216000000
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-Mcu.Pin16=PD7
+RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
-Mcu.Pin13=PA15
+RCC.TIM15Freq_Value=72000000
-Mcu.Pin14=PD5
+RCC.TIM16Freq_Value=72000000
-Mcu.Pin19=PB7
+RCC.TIM17Freq_Value=72000000
-RCC.TIM20Freq_Value=72000000
+RCC.TIM1Freq_Value=72000000
-ProjectManager.ComputerToolchain=false
+RCC.TIM20Freq_Value=72000000
-Mcu.Pin17=PB3
+RCC.TIM2Freq_Value=72000000
-RCC.HSI_VALUE=16000000
+RCC.TIM3Freq_Value=72000000
-Mcu.Pin18=PB4
+RCC.TIM8Freq_Value=72000000
-RCC.TIM3Freq_Value=72000000
+RCC.UART4Freq_Value=54000000
-PH0/OSC_IN.GPIO_Label=MCO [STM32F103CBT6_PA8]
+RCC.UART5Freq_Value=54000000
-RCC.PLLQ=3
+RCC.UART7Freq_Value=54000000
-NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+RCC.UART8Freq_Value=54000000
-Mcu.Pin11=PA13
+RCC.USART1Freq_Value=108000000
-Mcu.Pin12=PA14
+RCC.USART2Freq_Value=54000000
-RCC.PLLM=4
+RCC.USART3Freq_Value=54000000
-RCC.PLLN=216
+RCC.USART6Freq_Value=108000000
-Mcu.Pin10=PG7
+RCC.USBFreq_Value=144000000
-PB7.Locked=true
+RCC.VCOI2SOutputFreq_Value=384000000
-PC15/OSC32_OUT.Signal=RCC_OSC32_OUT
+RCC.VCOInputFreq_Value=2000000
-RCC.I2C2Freq_Value=54000000
+RCC.VCOOutput2Freq_Value=8000000
-PD9.Locked=true
+RCC.VCOOutputFreq_Value=432000000
-RCC.APB1Freq_Value=54000000
+RCC.VCOSAIOutputFreq_Value=384000000
-PB0.Signal=GPIO_Output
+RCC.VcooutputI2S=48000000
-ProjectManager.DeviceId=STM32F746ZGTx
+RCC.WatchDogFreq_Value=32000
-PG7.GPIOParameters=GPIO_Label
+SH.GPXTI13.0=GPIO_EXTI13
-PD7.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
+SH.GPXTI13.ConfNb=1
-ProjectManager.LibraryCopy=0
+USART2.IPParameters=VirtualMode-Asynchronous
-PH0/OSC_IN.GPIOParameters=GPIO_Label
+USART2.VirtualMode-Asynchronous=VM_ASYNC
+USART3.IPParameters=VirtualMode-Asynchronous
+USART3.VirtualMode-Asynchronous=VM_ASYNC
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=NUCLEO-F746ZG
+boardIOC=true