diff --git a/templates/f7/.mxproject b/templates/f7/.mxproject
index 1315981..d3ffa8d 100644
--- a/templates/f7/.mxproject
+++ b/templates/f7/.mxproject
@@ -1,14 +1,14 @@
[PreviousGenFiles]
-HeaderPath=/home/enrico/Projects/lwc-compare/templates/f7/Inc
+HeaderPath=/home/enrico/Projects/lw-crypto-compare/templates/f7/Inc
HeaderFiles=stm32f7xx_it.h;stm32f7xx_hal_conf.h;main.h;stm32_assert.h;
-SourcePath=/home/enrico/Projects/lwc-compare/templates/f7/Src
+SourcePath=/home/enrico/Projects/lw-crypto-compare/templates/f7/Src
SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c;
[PreviousLibFiles]
-LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/mpu_armv7.h;
+LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_armv8mml.h;
[PreviousUsedMakefileFiles]
SourceFiles=Src/main.c;Src/stm32f7xx_it.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;;
HeaderPath=Drivers/STM32F7xx_HAL_Driver/Inc;Drivers/CMSIS/Device/ST/STM32F7xx/Include;Drivers/CMSIS/Include;Inc;
-CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:0;ART_ACCLERATOR_ENABLE:0;STM32F746xx;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;
+CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:1;ART_ACCLERATOR_ENABLE:1;STM32F746xx;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;
diff --git a/templates/f7/Makefile b/templates/f7/Makefile
index bb539a7..ea32ee7 100644
--- a/templates/f7/Makefile
+++ b/templates/f7/Makefile
@@ -1,199 +1,199 @@
-##########################################################################################################################
-# File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Fri May 01 19:54:41 CEST 2020]
-##########################################################################################################################
-
-# ------------------------------------------------
-# Generic Makefile (based on gcc)
-#
-# ChangeLog :
-# 2017-02-10 - Several enhancements + project update mode
-# 2015-07-22 - first version
-# ------------------------------------------------
-
-######################################
-# target
-######################################
-TARGET = f7
-
-
-######################################
-# building variables
-######################################
-# debug build?
-DEBUG = 0
-# optimization
-OPT = -O3
-
-
-#######################################
-# paths
-#######################################
-# Build path
-BUILD_DIR = build
-
-######################################
-# source
-######################################
-# C sources
-C_SOURCES = \
-Src/main.c \
-Src/stm32f7xx_it.c \
-Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c \
-Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c \
-Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c \
-Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c \
-Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c \
-Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c \
-Src/system_stm32f7xx.c \
-Src/test.c \
-Src/uartp.c \
-$(SRC_FILES)
-
-# ASM sources
-ASM_SOURCES = \
-startup_stm32f746xx.s \
-$(ASM_FILES)
-
-
-#######################################
-# binaries
-#######################################
-PREFIX = arm-none-eabi-
-# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
-# either it can be added to the PATH environment variable.
-ifdef GCC_PATH
-CC = $(GCC_PATH)/$(PREFIX)gcc
-AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
-CP = $(GCC_PATH)/$(PREFIX)objcopy
-SZ = $(GCC_PATH)/$(PREFIX)size
-else
-CC = $(PREFIX)gcc
-AS = $(PREFIX)gcc -x assembler-with-cpp
-CP = $(PREFIX)objcopy
-SZ = $(PREFIX)size
-endif
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary -S
-
-#######################################
-# CFLAGS
-#######################################
-# cpu
-CPU = -mcpu=cortex-m7
-
-# fpu
-FPU = -mfpu=fpv5-sp-d16
-
-# float-abi
-FLOAT-ABI = -mfloat-abi=hard
-
-# mcu
-MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
-
-# macros for gcc
-# AS defines
-AS_DEFS =
-
-# C defines
-C_DEFS = \
--DUSE_FULL_LL_DRIVER \
--DHSE_VALUE=8000000 \
--DHSE_STARTUP_TIMEOUT=100 \
--DLSE_STARTUP_TIMEOUT=5000 \
--DLSE_VALUE=32768 \
--DEXTERNAL_CLOCK_VALUE=12288000 \
--DHSI_VALUE=16000000 \
--DLSI_VALUE=32000 \
--DVDD_VALUE=3300 \
--DPREFETCH_ENABLE=0 \
--DART_ACCLERATOR_ENABLE=0 \
--DSTM32F746xx \
--DNDEBUG \
--UDEBUG
-
-
-# AS includes
-AS_INCLUDES =
-
-# C includes
-C_INCLUDES = \
--IInc \
--IDrivers/STM32F7xx_HAL_Driver/Inc \
--IDrivers/CMSIS/Device/ST/STM32F7xx/Include \
--IDrivers/CMSIS/Include
-
-
-# compile gcc flags
-ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
-
-CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
-
-ifeq ($(DEBUG), 1)
-CFLAGS += -g -gdwarf-2
-endif
-
-
-# Generate dependency information
-CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
-
-
-#######################################
-# LDFLAGS
-#######################################
-# link script
-LDSCRIPT = STM32F746ZGTx_FLASH.ld
-
-# libraries
-LIBS = -lc -lm -lnosys
-LIBDIR =
-LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
-
-# default action: build all
-all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
-
-
-#######################################
-# build the application
-#######################################
-# list of objects
-OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
-vpath %.c $(sort $(dir $(C_SOURCES)))
-# list of ASM program objects
-ASM_OBJS=$(ASM_SOURCES:.S=.o)
-OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_OBJS:.s=.o)))
-vpath %.s $(sort $(dir $(ASM_SOURCES)))
-
-$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
- $(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
-
-$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
- $(AS) -c $(CFLAGS) $< -o $@
-
-$(BUILD_DIR)/%.o: %.S Makefile | $(BUILD_DIR)
- $(AS) -c $(CFLAGS) $< -o $@
-
-$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
- $(CC) $(OBJECTS) $(LDFLAGS) -o $@
- $(SZ) $@
-
-$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
- $(HEX) $< $@
-
-$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
- $(BIN) $< $@
-
-$(BUILD_DIR):
- mkdir $@
-
-#######################################
-# clean up
-#######################################
-clean:
- -rm -fR $(BUILD_DIR)
-
-#######################################
-# dependencies
-#######################################
--include $(wildcard $(BUILD_DIR)/*.d)
-
-# *** EOF ***
+##########################################################################################################################
+# File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Thu Jun 18 14:36:16 CEST 2020]
+##########################################################################################################################
+
+# ------------------------------------------------
+# Generic Makefile (based on gcc)
+#
+# ChangeLog :
+# 2017-02-10 - Several enhancements + project update mode
+# 2015-07-22 - first version
+# ------------------------------------------------
+
+######################################
+# target
+######################################
+TARGET = f7
+
+
+######################################
+# building variables
+######################################
+# debug build?
+DEBUG = 0
+# optimization
+OPT = -O3
+
+
+#######################################
+# paths
+#######################################
+# Build path
+BUILD_DIR = build
+
+######################################
+# source
+######################################
+# C sources
+C_SOURCES = \
+Src/main.c \
+Src/stm32f7xx_it.c \
+Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c \
+Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c \
+Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c \
+Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c \
+Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c \
+Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c \
+Src/system_stm32f7xx.c \
+Src/test.c \
+Src/uartp.c \
+$(SRC_FILES)
+
+# ASM sources
+ASM_SOURCES = \
+startup_stm32f746xx.s \
+$(ASM_FILES)
+
+
+#######################################
+# binaries
+#######################################
+PREFIX = arm-none-eabi-
+# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
+# either it can be added to the PATH environment variable.
+ifdef GCC_PATH
+CC = $(GCC_PATH)/$(PREFIX)gcc
+AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
+CP = $(GCC_PATH)/$(PREFIX)objcopy
+SZ = $(GCC_PATH)/$(PREFIX)size
+else
+CC = $(PREFIX)gcc
+AS = $(PREFIX)gcc -x assembler-with-cpp
+CP = $(PREFIX)objcopy
+SZ = $(PREFIX)size
+endif
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary -S
+
+#######################################
+# CFLAGS
+#######################################
+# cpu
+CPU = -mcpu=cortex-m7
+
+# fpu
+FPU = -mfpu=fpv5-sp-d16
+
+# float-abi
+FLOAT-ABI = -mfloat-abi=hard
+
+# mcu
+MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
+
+# macros for gcc
+# AS defines
+AS_DEFS =
+
+# C defines
+C_DEFS = \
+-DUSE_FULL_LL_DRIVER \
+-DHSE_VALUE=8000000 \
+-DHSE_STARTUP_TIMEOUT=100 \
+-DLSE_STARTUP_TIMEOUT=5000 \
+-DLSE_VALUE=32768 \
+-DEXTERNAL_CLOCK_VALUE=12288000 \
+-DHSI_VALUE=16000000 \
+-DLSI_VALUE=32000 \
+-DVDD_VALUE=3300 \
+-DSTM32F746xx \
+-DNDEBUG \
+-UDEBUG \
+-DPREFETCH_ENABLE=1 \
+-DART_ACCLERATOR_ENABLE=1
+
+
+# AS includes
+AS_INCLUDES =
+
+# C includes
+C_INCLUDES = \
+-IInc \
+-IDrivers/STM32F7xx_HAL_Driver/Inc \
+-IDrivers/CMSIS/Device/ST/STM32F7xx/Include \
+-IDrivers/CMSIS/Include
+
+
+# compile gcc flags
+ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+ifeq ($(DEBUG), 1)
+CFLAGS += -g -gdwarf-2
+endif
+
+
+# Generate dependency information
+CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
+
+
+#######################################
+# LDFLAGS
+#######################################
+# link script
+LDSCRIPT = STM32F746ZGTx_FLASH.ld
+
+# libraries
+LIBS = -lc -lm -lnosys
+LIBDIR =
+LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
+
+# default action: build all
+all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
+
+
+#######################################
+# build the application
+#######################################
+# list of objects
+OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
+vpath %.c $(sort $(dir $(C_SOURCES)))
+# list of ASM program objects
+ASM_OBJS=$(ASM_SOURCES:.S=.o)
+OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_OBJS:.s=.o)))
+vpath %.s $(sort $(dir $(ASM_SOURCES)))
+
+$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
+ $(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
+
+$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
+ $(AS) -c $(CFLAGS) $< -o $@
+
+$(BUILD_DIR)/%.o: %.S Makefile | $(BUILD_DIR)
+ $(AS) -c $(CFLAGS) $< -o $@
+
+$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
+ $(CC) $(OBJECTS) $(LDFLAGS) -o $@
+ $(SZ) $@
+
+$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+ $(HEX) $< $@
+
+$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+ $(BIN) $< $@
+
+$(BUILD_DIR):
+ mkdir $@
+
+#######################################
+# clean up
+#######################################
+clean:
+ -rm -fR $(BUILD_DIR)
+
+#######################################
+# dependencies
+#######################################
+-include $(wildcard $(BUILD_DIR)/*.d)
+
+# *** EOF ***
diff --git a/templates/f7/Src/main.c b/templates/f7/Src/main.c
index 3583250..970b682 100644
--- a/templates/f7/Src/main.c
+++ b/templates/f7/Src/main.c
@@ -1,416 +1,422 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * @file : main.c
- * @brief : Main program body
- ******************************************************************************
- * @attention
- *
- * © Copyright (c) 2019 STMicroelectronics.
- * All rights reserved.
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-#include "test.h"
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-static void MX_GPIO_Init(void);
-static void MX_USART2_UART_Init(void);
-static void MX_USART3_UART_Init(void);
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
- * @brief The application entry point.
- * @retval int
- */
-int main(void)
-{
- /* USER CODE BEGIN 1 */
-
- /* USER CODE END 1 */
-
- /* MCU Configuration--------------------------------------------------------*/
-
- /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-
-
- LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
- LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
-
- NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
-
- /* System interrupt init*/
-
- /* USER CODE BEGIN Init */
-
- /* USER CODE END Init */
-
- /* Configure the system clock */
- SystemClock_Config();
-
- /* USER CODE BEGIN SysInit */
-
- /* USER CODE END SysInit */
-
- /* Initialize all configured peripherals */
- MX_GPIO_Init();
- MX_USART2_UART_Init();
- MX_USART3_UART_Init();
- /* USER CODE BEGIN 2 */
- test_setup();
- /* USER CODE END 2 */
-
- /* Infinite loop */
- /* USER CODE BEGIN WHILE */
- while (1)
- {
- test_loop();
- /* USER CODE END WHILE */
-
- /* USER CODE BEGIN 3 */
- }
- /* USER CODE END 3 */
-}
-
-/**
- * @brief System Clock Configuration
- * @retval None
- */
-void SystemClock_Config(void)
-{
- LL_FLASH_SetLatency(LL_FLASH_LATENCY_7);
-
- if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_7)
- {
- Error_Handler();
- }
- LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
- LL_PWR_EnableOverDriveMode();
- LL_RCC_HSE_EnableBypass();
- LL_RCC_HSE_Enable();
-
- /* Wait till HSE is ready */
- while(LL_RCC_HSE_IsReady() != 1)
- {
-
- }
- LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_4, 216, LL_RCC_PLLP_DIV_2);
- LL_RCC_PLL_Enable();
-
- /* Wait till PLL is ready */
- while(LL_RCC_PLL_IsReady() != 1)
- {
-
- }
- LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
- LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_4);
- LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_2);
- LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
-
- /* Wait till System clock is ready */
- while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
- {
-
- }
- LL_Init1msTick(216000000);
- LL_SetSystemCoreClock(216000000);
- LL_RCC_SetUSARTClockSource(LL_RCC_USART2_CLKSOURCE_PCLK1);
- LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK1);
-}
-
-/**
- * @brief USART2 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_USART2_UART_Init(void)
-{
-
- /* USER CODE BEGIN USART2_Init 0 */
-
- /* USER CODE END USART2_Init 0 */
-
- LL_USART_InitTypeDef USART_InitStruct = {0};
-
- LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
-
- /* Peripheral clock enable */
- LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2);
-
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
- /**USART2 GPIO Configuration
- PD5 ------> USART2_TX
- PD6 ------> USART2_RX
- */
- GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
- LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-
- GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
- LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-
- /* USART2 interrupt Init */
- NVIC_SetPriority(USART2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
- NVIC_EnableIRQ(USART2_IRQn);
-
- /* USER CODE BEGIN USART2_Init 1 */
-
- /* USER CODE END USART2_Init 1 */
- USART_InitStruct.BaudRate = 115200;
- USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
- USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
- USART_InitStruct.Parity = LL_USART_PARITY_NONE;
- USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
- USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
- USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
- LL_USART_Init(USART2, &USART_InitStruct);
- LL_USART_ConfigAsyncMode(USART2);
- LL_USART_Enable(USART2);
- /* USER CODE BEGIN USART2_Init 2 */
-
- /* USER CODE END USART2_Init 2 */
-
-}
-
-/**
- * @brief USART3 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_USART3_UART_Init(void)
-{
-
- /* USER CODE BEGIN USART3_Init 0 */
-
- /* USER CODE END USART3_Init 0 */
-
- LL_USART_InitTypeDef USART_InitStruct = {0};
-
- LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
-
- /* Peripheral clock enable */
- LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3);
-
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
- /**USART3 GPIO Configuration
- PD8 ------> USART3_TX
- PD9 ------> USART3_RX
- */
- GPIO_InitStruct.Pin = STLK_RX_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
- LL_GPIO_Init(STLK_RX_GPIO_Port, &GPIO_InitStruct);
-
- GPIO_InitStruct.Pin = STLK_TX_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
- LL_GPIO_Init(STLK_TX_GPIO_Port, &GPIO_InitStruct);
-
- /* USER CODE BEGIN USART3_Init 1 */
-
- /* USER CODE END USART3_Init 1 */
- USART_InitStruct.BaudRate = 115200;
- USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
- USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
- USART_InitStruct.Parity = LL_USART_PARITY_NONE;
- USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
- USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
- USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
- LL_USART_Init(USART3, &USART_InitStruct);
- LL_USART_ConfigAsyncMode(USART3);
- LL_USART_Enable(USART3);
- /* USER CODE BEGIN USART3_Init 2 */
-
- /* USER CODE END USART3_Init 2 */
-
-}
-
-/**
- * @brief GPIO Initialization Function
- * @param None
- * @retval None
- */
-static void MX_GPIO_Init(void)
-{
- LL_EXTI_InitTypeDef EXTI_InitStruct = {0};
- LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
-
- /* GPIO Ports Clock Enable */
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC);
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOH);
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB);
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOG);
- LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
-
- /**/
- LL_GPIO_ResetOutputPin(LD1_GPIO_Port, LD1_Pin);
-
- /**/
- LL_GPIO_ResetOutputPin(LD3_GPIO_Port, LD3_Pin);
-
- /**/
- LL_GPIO_ResetOutputPin(USB_PowerSwitchOn_GPIO_Port, USB_PowerSwitchOn_Pin);
-
- /**/
- LL_GPIO_ResetOutputPin(LD2_GPIO_Port, LD2_Pin);
-
- /**/
- LL_GPIO_SetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
-
- /**/
- LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTC, LL_SYSCFG_EXTI_LINE13);
-
- /**/
- EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_13;
- EXTI_InitStruct.LineCommand = ENABLE;
- EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
- EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_RISING;
- LL_EXTI_Init(&EXTI_InitStruct);
-
- /**/
- LL_GPIO_SetPinPull(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_PULL_NO);
-
- /**/
- LL_GPIO_SetPinMode(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_MODE_INPUT);
-
- /**/
- GPIO_InitStruct.Pin = LD1_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- LL_GPIO_Init(LD1_GPIO_Port, &GPIO_InitStruct);
-
- /**/
- GPIO_InitStruct.Pin = LD3_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- LL_GPIO_Init(LD3_GPIO_Port, &GPIO_InitStruct);
-
- /**/
- GPIO_InitStruct.Pin = USB_PowerSwitchOn_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- LL_GPIO_Init(USB_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct);
-
- /**/
- GPIO_InitStruct.Pin = USB_OverCurrent_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- LL_GPIO_Init(USB_OverCurrent_GPIO_Port, &GPIO_InitStruct);
-
- /**/
- GPIO_InitStruct.Pin = CRYPTO_BUSY_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- LL_GPIO_Init(CRYPTO_BUSY_GPIO_Port, &GPIO_InitStruct);
-
- /**/
- GPIO_InitStruct.Pin = LD2_Pin;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
- GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
- GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
- GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
- LL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
-
-}
-
-/* USER CODE BEGIN 4 */
-
-/* USER CODE END 4 */
-
-/**
- * @brief This function is executed in case of error occurrence.
- * @retval None
- */
-void Error_Handler(void)
-{
- /* USER CODE BEGIN Error_Handler_Debug */
- /* User can add his own implementation to report the HAL error return state */
-
- /* USER CODE END Error_Handler_Debug */
-}
-
-#ifdef USE_FULL_ASSERT
-/**
- * @brief Reports the name of the source file and the source line number
- * where the assert_param error has occurred.
- * @param file: pointer to the source file name
- * @param line: assert_param error line source number
- * @retval None
- */
-void assert_failed(uint8_t *file, uint32_t line)
-{
- /* USER CODE BEGIN 6 */
- /* User can add his own implementation to report the file name and line number,
- tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
- /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.c
+ * @brief : Main program body
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+#include "test.h"
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_USART2_UART_Init(void);
+static void MX_USART3_UART_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+ * @brief The application entry point.
+ * @retval int
+ */
+int main(void)
+{
+ /* USER CODE BEGIN 1 */
+
+ /* USER CODE END 1 */
+
+ /* Enable I-Cache---------------------------------------------------------*/
+ SCB_EnableICache();
+
+ /* Enable D-Cache---------------------------------------------------------*/
+ SCB_EnableDCache();
+
+ /* MCU Configuration--------------------------------------------------------*/
+
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+
+
+ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
+ LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
+
+ NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+ /* System interrupt init*/
+
+ /* USER CODE BEGIN Init */
+
+ /* USER CODE END Init */
+
+ /* Configure the system clock */
+ SystemClock_Config();
+
+ /* USER CODE BEGIN SysInit */
+
+ /* USER CODE END SysInit */
+
+ /* Initialize all configured peripherals */
+ MX_GPIO_Init();
+ MX_USART2_UART_Init();
+ MX_USART3_UART_Init();
+ /* USER CODE BEGIN 2 */
+ test_setup();
+ /* USER CODE END 2 */
+
+ /* Infinite loop */
+ /* USER CODE BEGIN WHILE */
+ while (1)
+ {
+ test_loop();
+ /* USER CODE END WHILE */
+
+ /* USER CODE BEGIN 3 */
+ }
+ /* USER CODE END 3 */
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ */
+void SystemClock_Config(void)
+{
+ LL_FLASH_SetLatency(LL_FLASH_LATENCY_7);
+
+ if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_7)
+ {
+ Error_Handler();
+ }
+ LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
+ LL_PWR_EnableOverDriveMode();
+ LL_RCC_HSE_EnableBypass();
+ LL_RCC_HSE_Enable();
+
+ /* Wait till HSE is ready */
+ while(LL_RCC_HSE_IsReady() != 1)
+ {
+
+ }
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_4, 216, LL_RCC_PLLP_DIV_2);
+ LL_RCC_PLL_Enable();
+
+ /* Wait till PLL is ready */
+ while(LL_RCC_PLL_IsReady() != 1)
+ {
+
+ }
+ LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+ LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_4);
+ LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_2);
+ LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+ /* Wait till System clock is ready */
+ while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+ {
+
+ }
+ LL_Init1msTick(216000000);
+ LL_SetSystemCoreClock(216000000);
+ LL_RCC_SetUSARTClockSource(LL_RCC_USART2_CLKSOURCE_PCLK1);
+ LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK1);
+}
+
+/**
+ * @brief USART2 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_USART2_UART_Init(void)
+{
+
+ /* USER CODE BEGIN USART2_Init 0 */
+
+ /* USER CODE END USART2_Init 0 */
+
+ LL_USART_InitTypeDef USART_InitStruct = {0};
+
+ LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+ /* Peripheral clock enable */
+ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2);
+
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
+ /**USART2 GPIO Configuration
+ PD5 ------> USART2_TX
+ PD6 ------> USART2_RX
+ */
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
+ LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
+ LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+ /* USART2 interrupt Init */
+ NVIC_SetPriority(USART2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
+ NVIC_EnableIRQ(USART2_IRQn);
+
+ /* USER CODE BEGIN USART2_Init 1 */
+
+ /* USER CODE END USART2_Init 1 */
+ USART_InitStruct.BaudRate = 115200;
+ USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
+ USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
+ USART_InitStruct.Parity = LL_USART_PARITY_NONE;
+ USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
+ USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+ USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
+ LL_USART_Init(USART2, &USART_InitStruct);
+ LL_USART_ConfigAsyncMode(USART2);
+ LL_USART_Enable(USART2);
+ /* USER CODE BEGIN USART2_Init 2 */
+
+ /* USER CODE END USART2_Init 2 */
+
+}
+
+/**
+ * @brief USART3 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_USART3_UART_Init(void)
+{
+
+ /* USER CODE BEGIN USART3_Init 0 */
+
+ /* USER CODE END USART3_Init 0 */
+
+ LL_USART_InitTypeDef USART_InitStruct = {0};
+
+ LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+ /* Peripheral clock enable */
+ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3);
+
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
+ /**USART3 GPIO Configuration
+ PD8 ------> USART3_TX
+ PD9 ------> USART3_RX
+ */
+ GPIO_InitStruct.Pin = STLK_RX_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
+ LL_GPIO_Init(STLK_RX_GPIO_Port, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = STLK_TX_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
+ LL_GPIO_Init(STLK_TX_GPIO_Port, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN USART3_Init 1 */
+
+ /* USER CODE END USART3_Init 1 */
+ USART_InitStruct.BaudRate = 115200;
+ USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
+ USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
+ USART_InitStruct.Parity = LL_USART_PARITY_NONE;
+ USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
+ USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+ USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
+ LL_USART_Init(USART3, &USART_InitStruct);
+ LL_USART_ConfigAsyncMode(USART3);
+ LL_USART_Enable(USART3);
+ /* USER CODE BEGIN USART3_Init 2 */
+
+ /* USER CODE END USART3_Init 2 */
+
+}
+
+/**
+ * @brief GPIO Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_GPIO_Init(void)
+{
+ LL_EXTI_InitTypeDef EXTI_InitStruct = {0};
+ LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+ /* GPIO Ports Clock Enable */
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC);
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOH);
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB);
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOG);
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
+
+ /**/
+ LL_GPIO_ResetOutputPin(LD1_GPIO_Port, LD1_Pin);
+
+ /**/
+ LL_GPIO_ResetOutputPin(LD3_GPIO_Port, LD3_Pin);
+
+ /**/
+ LL_GPIO_ResetOutputPin(USB_PowerSwitchOn_GPIO_Port, USB_PowerSwitchOn_Pin);
+
+ /**/
+ LL_GPIO_ResetOutputPin(LD2_GPIO_Port, LD2_Pin);
+
+ /**/
+ LL_GPIO_SetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
+
+ /**/
+ LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTC, LL_SYSCFG_EXTI_LINE13);
+
+ /**/
+ EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_13;
+ EXTI_InitStruct.LineCommand = ENABLE;
+ EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
+ EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_RISING;
+ LL_EXTI_Init(&EXTI_InitStruct);
+
+ /**/
+ LL_GPIO_SetPinPull(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_PULL_NO);
+
+ /**/
+ LL_GPIO_SetPinMode(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_MODE_INPUT);
+
+ /**/
+ GPIO_InitStruct.Pin = LD1_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(LD1_GPIO_Port, &GPIO_InitStruct);
+
+ /**/
+ GPIO_InitStruct.Pin = LD3_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(LD3_GPIO_Port, &GPIO_InitStruct);
+
+ /**/
+ GPIO_InitStruct.Pin = USB_PowerSwitchOn_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(USB_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct);
+
+ /**/
+ GPIO_InitStruct.Pin = USB_OverCurrent_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(USB_OverCurrent_GPIO_Port, &GPIO_InitStruct);
+
+ /**/
+ GPIO_InitStruct.Pin = CRYPTO_BUSY_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(CRYPTO_BUSY_GPIO_Port, &GPIO_InitStruct);
+
+ /**/
+ GPIO_InitStruct.Pin = LD2_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+ * @brief This function is executed in case of error occurrence.
+ * @retval None
+ */
+void Error_Handler(void)
+{
+ /* USER CODE BEGIN Error_Handler_Debug */
+ /* User can add his own implementation to report the HAL error return state */
+
+ /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief Reports the name of the source file and the source line number
+ * where the assert_param error has occurred.
+ * @param file: pointer to the source file name
+ * @param line: assert_param error line source number
+ * @retval None
+ */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+ /* USER CODE BEGIN 6 */
+ /* User can add his own implementation to report the file name and line number,
+ tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+ /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/templates/f7/f7.ioc b/templates/f7/f7.ioc
index edae909..8d2cafa 100644
--- a/templates/f7/f7.ioc
+++ b/templates/f7/f7.ioc
@@ -1,248 +1,254 @@
-#MicroXplorer Configuration settings - do not modify
-Mcu.Family=STM32F7
-ProjectManager.MainLocation=Src
-RCC.MCOFreq_Value=72000000
-RCC.USART1Freq_Value=108000000
-RCC.SAI1Freq_Value=192000000
-USART2.IPParameters=VirtualMode-Asynchronous
-RCC.CortexFreq_Value=216000000
-RCC.TIM17Freq_Value=72000000
-PG6.Signal=GPIO_Output
-ProjectManager.KeepUserCode=true
-Mcu.UserName=STM32F746ZGTx
-PD9.GPIOParameters=GPIO_Label
-PG6.Locked=true
-RCC.PLLCLKFreq_Value=216000000
-PB14.GPIO_Label=LD3 [Red]
-PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
-PA14.GPIO_Label=TCK
-RCC.PLLQCLKFreq_Value=144000000
-RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_USART2_UART_Init-USART2-false-LL-true,4-MX_USART3_UART_Init-USART3-false-LL-true,5-MX_CORTEX_M7_Init-CORTEX_M7-false-LL-true
-PD8.Locked=true
-RCC.RTCFreq_Value=32000
-PD6.Locked=true
-PB0.GPIO_Label=LD1 [Green]
-PC14/OSC32_IN.Mode=LSE-External-Oscillator
-RCC.PLLI2SRCLKFreq_Value=192000000
-RCC.USART2Freq_Value=54000000
-PC13.GPIO_Label=USER_Btn [B1]
-PD9.Mode=Asynchronous
-PinOutPanel.RotationAngle=0
-RCC.MCO1PinFreq_Value=16000000
-RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-ProjectManager.StackSize=0x400
-SH.GPXTI13.0=GPIO_EXTI13
-USART3.VirtualMode-Asynchronous=VM_ASYNC
-RCC.I2C3Freq_Value=54000000
-RCC.LPTIM1Freq_Value=54000000
-Mcu.IP4=USART2
-RCC.FCLKCortexFreq_Value=216000000
-Mcu.IP5=USART3
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-Mcu.IP2=RCC
-Mcu.IP3=SYS
-Mcu.IP0=CORTEX_M7
-Mcu.IP1=NVIC
-Mcu.UserConstants=
-RCC.SDMMCFreq_Value=216000000
-SH.GPXTI13.ConfNb=1
-Mcu.ThirdPartyNb=0
-PH0/OSC_IN.Mode=HSE-External-Clock-Source
-RCC.HCLKFreq_Value=216000000
-RCC.I2C4Freq_Value=54000000
-Mcu.IPNb=6
-RCC.I2SClocksFreq_Value=48000000
-RCC.PLLI2SRoutputFreq_Value=192000000
-ProjectManager.PreviousToolchain=
-RCC.APB2TimFreq_Value=216000000
-RCC.SPDIFRXFreq_Value=192000000
-RCC.VcooutputI2S=48000000
-PH1/OSC_OUT.Signal=RCC_OSC_OUT
-PD8.GPIOParameters=GPIO_Label
-Mcu.Pin6=PB14
-RCC.SAI2Freq_Value=192000000
-PD8.Signal=USART3_TX
-Mcu.Pin7=PD8
-Mcu.Pin8=PD9
-Mcu.Pin9=PG6
-RCC.VCOSAIOutputFreq_Value=384000000
-RCC.AHBFreq_Value=216000000
-RCC.TIM2Freq_Value=72000000
-Mcu.Pin0=PC13
-Mcu.Pin1=PC14/OSC32_IN
-PD5.Mode=Asynchronous
-Mcu.Pin2=PC15/OSC32_OUT
-Mcu.Pin3=PH0/OSC_IN
-RCC.USART3Freq_Value=54000000
-Mcu.Pin4=PH1/OSC_OUT
-Mcu.Pin5=PB0
-RCC.PLLSAIRCLKFreq_Value=192000000
-ProjectManager.ProjectBuild=false
-RCC.HSE_VALUE=8000000
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-USART2.VirtualMode-Asynchronous=VM_ASYNC
-NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
-RCC.PLLMUL=RCC_PLL_MUL9
-PD7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
-PH0/OSC_IN.Locked=true
-ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.16.0
-MxDb.Version=DB.5.0.60
-PB0.GPIOParameters=GPIO_Label
-ProjectManager.BackupPrevious=false
-RCC.VCOInputFreq_Value=2000000
-PA14.Mode=Serial_Wire
-PH1/OSC_OUT.Locked=true
-File.Version=6
-PB7.Signal=GPIO_Output
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-PC15/OSC32_OUT.Locked=true
-PH1/OSC_OUT.Mode=HSE-External-Clock-Source
-ProjectManager.HalAssertFull=false
-PB0.Locked=true
-ProjectManager.ProjectName=f7
-RCC.TIM1Freq_Value=72000000
-PD7.GPIO_Label=CRYPTO_BUSY
-PA13.GPIOParameters=GPIO_Label
-RCC.PLLMCOFreq_Value=72000000
-PB7.GPIO_Label=LD2 [Blue]
-RCC.MCO2PinFreq_Value=216000000
-Mcu.Package=LQFP144
-RCC.TIM15Freq_Value=72000000
-RCC.ADC34outputFreq_Value=72000000
-PC14/OSC32_IN.Signal=RCC_OSC32_IN
-PA14.Locked=true
-ProjectManager.ToolChainLocation=
-RCC.LSI_VALUE=32000
-VP_SYS_VS_Systick.Signal=SYS_VS_Systick
-USART3.IPParameters=VirtualMode-Asynchronous
-PA15.Signal=SYS_JTDI
-PB14.GPIOParameters=GPIO_Label
-RCC.TIM16Freq_Value=72000000
-RCC.APB2CLKDivider=RCC_HCLK_DIV2
-RCC.CECFreq_Value=32786.88524590164
-RCC.APB1TimFreq_Value=108000000
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-PD6.Signal=USART2_RX
-ProjectManager.CustomerFirmwarePackage=
-RCC.PLLSAIQCLKFreq_Value=192000000
-PB3.Locked=true
-PB4.Signal=SYS_JTRST
-RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
-RCC.I2SFreq_Value=192000000
-RCC.PLLQoutputFreq_Value=144000000
-ProjectManager.ProjectFileName=f7.ioc
-RCC.ADC12outputFreq_Value=72000000
-PG7.Locked=true
-PG7.Signal=GPIO_Input
-RCC.UART7Freq_Value=54000000
-PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
-Mcu.PinsNb=21
-ProjectManager.NoMain=false
-PC13.Locked=true
-PC13.Signal=GPXTI13
-PD7.Signal=GPIO_Output
-ProjectManager.DefaultFWLocation=true
-PD5.Signal=USART2_TX
-PD9.Signal=USART3_RX
-ProjectManager.DeletePrevious=true
-RCC.UART8Freq_Value=54000000
-PB14.Locked=true
-RCC.APB1CLKDivider=RCC_HCLK_DIV4
-RCC.LCDTFToutputFreq_Value=96000000
-boardIOC=true
-PD6.Mode=Asynchronous
-NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
-RCC.FamilyName=M
-PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
-RCC.WatchDogFreq_Value=32000
-PA13.Signal=SYS_JTMS-SWDIO
-PA15.Locked=true
-ProjectManager.TargetToolchain=Makefile
-RCC.USART6Freq_Value=108000000
-PB7.GPIOParameters=GPIO_Label
-RCC.USBFreq_Value=144000000
-RCC.PLLSAIoutputFreq_Value=192000000
-PD7.Locked=true
-PD8.Mode=Asynchronous
-RCC.VCOI2SOutputFreq_Value=384000000
-PB14.Signal=GPIO_Output
-PG6.GPIOParameters=GPIO_Label
-PD7.PinState=GPIO_PIN_SET
-RCC.PLLSAIPCLKFreq_Value=192000000
-board=NUCLEO-F746ZG
-RCC.VCOOutputFreq_Value=432000000
-ProjectManager.LastFirmware=true
-RCC.VCOOutput2Freq_Value=8000000
-PH0/OSC_IN.Signal=RCC_OSC_IN
-RCC.APB2Freq_Value=108000000
-RCC.TIM8Freq_Value=72000000
-RCC.UART4Freq_Value=54000000
-MxCube.Version=5.6.0
-RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
-RCC.I2C1Freq_Value=54000000
-RCC.PLLI2SPCLKFreq_Value=192000000
-PC13.GPIOParameters=GPIO_Label
-PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
-RCC.RNGFreq_Value=144000000
-VP_SYS_VS_Systick.Mode=SysTick
-RCC.EthernetFreq_Value=216000000
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-RCC.UART5Freq_Value=54000000
-PA13.Mode=Serial_Wire
-ProjectManager.FreePins=false
-RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
-ProjectManager.AskForMigrate=true
-Mcu.Name=STM32F746ZGTx
-RCC.PLLI2SQCLKFreq_Value=192000000
-RCC.RTCHSEDivFreq_Value=4000000
-PA13.GPIO_Label=TMS
-ProjectManager.UnderRoot=false
-ProjectManager.CoupleFile=false
-RCC.48MHZClocksFreq_Value=24000000
-PB4.Locked=true
-PB3.Signal=SYS_JTDO-SWO
-RCC.SYSCLKFreq_VALUE=216000000
-Mcu.Pin20=VP_SYS_VS_Systick
-NVIC.ForceEnableDMAVector=true
-KeepUserPlacement=true
-PA14.GPIOParameters=GPIO_Label
-PC14/OSC32_IN.Locked=true
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-PA13.Locked=true
-PC15/OSC32_OUT.Mode=LSE-External-Oscillator
-ProjectManager.CompilerOptimize=6
-PA14.Signal=SYS_JTCK-SWCLK
-ProjectManager.HeapSize=0x200
-Mcu.Pin15=PD6
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
-Mcu.Pin16=PD7
-Mcu.Pin13=PA15
-Mcu.Pin14=PD5
-Mcu.Pin19=PB7
-RCC.TIM20Freq_Value=72000000
-ProjectManager.ComputerToolchain=false
-Mcu.Pin17=PB3
-RCC.HSI_VALUE=16000000
-Mcu.Pin18=PB4
-RCC.TIM3Freq_Value=72000000
-PH0/OSC_IN.GPIO_Label=MCO [STM32F103CBT6_PA8]
-RCC.PLLQ=3
-NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-Mcu.Pin11=PA13
-Mcu.Pin12=PA14
-RCC.PLLM=4
-RCC.PLLN=216
-Mcu.Pin10=PG7
-PB7.Locked=true
-PC15/OSC32_OUT.Signal=RCC_OSC32_OUT
-RCC.I2C2Freq_Value=54000000
-PD9.Locked=true
-RCC.APB1Freq_Value=54000000
-PB0.Signal=GPIO_Output
-ProjectManager.DeviceId=STM32F746ZGTx
-PG7.GPIOParameters=GPIO_Label
-PD7.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
-ProjectManager.LibraryCopy=0
-PH0/OSC_IN.GPIOParameters=GPIO_Label
+#MicroXplorer Configuration settings - do not modify
+CORTEX_M7.ART_ACCLERATOR_ENABLE=1
+CORTEX_M7.CPU_DCache=Enabled
+CORTEX_M7.CPU_ICache=Enabled
+CORTEX_M7.IPParameters=PREFETCH_ENABLE,CPU_ICache,CPU_DCache,ART_ACCLERATOR_ENABLE
+CORTEX_M7.PREFETCH_ENABLE=1
+File.Version=6
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=true
+Mcu.Family=STM32F7
+Mcu.IP0=CORTEX_M7
+Mcu.IP1=NVIC
+Mcu.IP2=RCC
+Mcu.IP3=SYS
+Mcu.IP4=USART2
+Mcu.IP5=USART3
+Mcu.IPNb=6
+Mcu.Name=STM32F746ZGTx
+Mcu.Package=LQFP144
+Mcu.Pin0=PC13
+Mcu.Pin1=PC14/OSC32_IN
+Mcu.Pin10=PG7
+Mcu.Pin11=PA13
+Mcu.Pin12=PA14
+Mcu.Pin13=PA15
+Mcu.Pin14=PD5
+Mcu.Pin15=PD6
+Mcu.Pin16=PD7
+Mcu.Pin17=PB3
+Mcu.Pin18=PB4
+Mcu.Pin19=PB7
+Mcu.Pin2=PC15/OSC32_OUT
+Mcu.Pin20=VP_SYS_VS_Systick
+Mcu.Pin3=PH0/OSC_IN
+Mcu.Pin4=PH1/OSC_OUT
+Mcu.Pin5=PB0
+Mcu.Pin6=PB14
+Mcu.Pin7=PD8
+Mcu.Pin8=PD9
+Mcu.Pin9=PG6
+Mcu.PinsNb=21
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F746ZGTx
+MxCube.Version=5.6.0
+MxDb.Version=DB.5.0.60
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+PA13.GPIOParameters=GPIO_Label
+PA13.GPIO_Label=TMS
+PA13.Locked=true
+PA13.Mode=Serial_Wire
+PA13.Signal=SYS_JTMS-SWDIO
+PA14.GPIOParameters=GPIO_Label
+PA14.GPIO_Label=TCK
+PA14.Locked=true
+PA14.Mode=Serial_Wire
+PA14.Signal=SYS_JTCK-SWCLK
+PA15.Locked=true
+PA15.Signal=SYS_JTDI
+PB0.GPIOParameters=GPIO_Label
+PB0.GPIO_Label=LD1 [Green]
+PB0.Locked=true
+PB0.Signal=GPIO_Output
+PB14.GPIOParameters=GPIO_Label
+PB14.GPIO_Label=LD3 [Red]
+PB14.Locked=true
+PB14.Signal=GPIO_Output
+PB3.Locked=true
+PB3.Signal=SYS_JTDO-SWO
+PB4.Locked=true
+PB4.Signal=SYS_JTRST
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=LD2 [Blue]
+PB7.Locked=true
+PB7.Signal=GPIO_Output
+PC13.GPIOParameters=GPIO_Label
+PC13.GPIO_Label=USER_Btn [B1]
+PC13.Locked=true
+PC13.Signal=GPXTI13
+PC14/OSC32_IN.Locked=true
+PC14/OSC32_IN.Mode=LSE-External-Oscillator
+PC14/OSC32_IN.Signal=RCC_OSC32_IN
+PC15/OSC32_OUT.Locked=true
+PC15/OSC32_OUT.Mode=LSE-External-Oscillator
+PC15/OSC32_OUT.Signal=RCC_OSC32_OUT
+PD5.Mode=Asynchronous
+PD5.Signal=USART2_TX
+PD6.Locked=true
+PD6.Mode=Asynchronous
+PD6.Signal=USART2_RX
+PD7.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
+PD7.GPIO_Label=CRYPTO_BUSY
+PD7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
+PD7.Locked=true
+PD7.PinState=GPIO_PIN_SET
+PD7.Signal=GPIO_Output
+PD8.GPIOParameters=GPIO_Label
+PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
+PD8.Locked=true
+PD8.Mode=Asynchronous
+PD8.Signal=USART3_TX
+PD9.GPIOParameters=GPIO_Label
+PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
+PD9.Locked=true
+PD9.Mode=Asynchronous
+PD9.Signal=USART3_RX
+PG6.GPIOParameters=GPIO_Label
+PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
+PG6.Locked=true
+PG6.Signal=GPIO_Output
+PG7.GPIOParameters=GPIO_Label
+PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
+PG7.Locked=true
+PG7.Signal=GPIO_Input
+PH0/OSC_IN.GPIOParameters=GPIO_Label
+PH0/OSC_IN.GPIO_Label=MCO [STM32F103CBT6_PA8]
+PH0/OSC_IN.Locked=true
+PH0/OSC_IN.Mode=HSE-External-Clock-Source
+PH0/OSC_IN.Signal=RCC_OSC_IN
+PH1/OSC_OUT.Locked=true
+PH1/OSC_OUT.Mode=HSE-External-Clock-Source
+PH1/OSC_OUT.Signal=RCC_OSC_OUT
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F746ZGTx
+ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.16.0
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=0
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=f7.ioc
+ProjectManager.ProjectName=f7
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=Makefile
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_USART2_UART_Init-USART2-false-LL-true,4-MX_USART3_UART_Init-USART3-false-LL-true,5-MX_CORTEX_M7_Init-CORTEX_M7-false-LL-true
+RCC.48MHZClocksFreq_Value=24000000
+RCC.ADC12outputFreq_Value=72000000
+RCC.ADC34outputFreq_Value=72000000
+RCC.AHBFreq_Value=216000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV4
+RCC.APB1Freq_Value=54000000
+RCC.APB1TimFreq_Value=108000000
+RCC.APB2CLKDivider=RCC_HCLK_DIV2
+RCC.APB2Freq_Value=108000000
+RCC.APB2TimFreq_Value=216000000
+RCC.CECFreq_Value=32786.88524590164
+RCC.CortexFreq_Value=216000000
+RCC.EthernetFreq_Value=216000000
+RCC.FCLKCortexFreq_Value=216000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=216000000
+RCC.HSE_VALUE=8000000
+RCC.HSI_VALUE=16000000
+RCC.I2C1Freq_Value=54000000
+RCC.I2C2Freq_Value=54000000
+RCC.I2C3Freq_Value=54000000
+RCC.I2C4Freq_Value=54000000
+RCC.I2SClocksFreq_Value=48000000
+RCC.I2SFreq_Value=192000000
+RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
+RCC.LCDTFToutputFreq_Value=96000000
+RCC.LPTIM1Freq_Value=54000000
+RCC.LSI_VALUE=32000
+RCC.MCO1PinFreq_Value=16000000
+RCC.MCO2PinFreq_Value=216000000
+RCC.MCOFreq_Value=72000000
+RCC.PLLCLKFreq_Value=216000000
+RCC.PLLI2SPCLKFreq_Value=192000000
+RCC.PLLI2SQCLKFreq_Value=192000000
+RCC.PLLI2SRCLKFreq_Value=192000000
+RCC.PLLI2SRoutputFreq_Value=192000000
+RCC.PLLM=4
+RCC.PLLMCOFreq_Value=72000000
+RCC.PLLMUL=RCC_PLL_MUL9
+RCC.PLLN=216
+RCC.PLLQ=3
+RCC.PLLQCLKFreq_Value=144000000
+RCC.PLLQoutputFreq_Value=144000000
+RCC.PLLSAIPCLKFreq_Value=192000000
+RCC.PLLSAIQCLKFreq_Value=192000000
+RCC.PLLSAIRCLKFreq_Value=192000000
+RCC.PLLSAIoutputFreq_Value=192000000
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
+RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
+RCC.RNGFreq_Value=144000000
+RCC.RTCFreq_Value=32000
+RCC.RTCHSEDivFreq_Value=4000000
+RCC.SAI1Freq_Value=192000000
+RCC.SAI2Freq_Value=192000000
+RCC.SDMMCFreq_Value=216000000
+RCC.SPDIFRXFreq_Value=192000000
+RCC.SYSCLKFreq_VALUE=216000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TIM15Freq_Value=72000000
+RCC.TIM16Freq_Value=72000000
+RCC.TIM17Freq_Value=72000000
+RCC.TIM1Freq_Value=72000000
+RCC.TIM20Freq_Value=72000000
+RCC.TIM2Freq_Value=72000000
+RCC.TIM3Freq_Value=72000000
+RCC.TIM8Freq_Value=72000000
+RCC.UART4Freq_Value=54000000
+RCC.UART5Freq_Value=54000000
+RCC.UART7Freq_Value=54000000
+RCC.UART8Freq_Value=54000000
+RCC.USART1Freq_Value=108000000
+RCC.USART2Freq_Value=54000000
+RCC.USART3Freq_Value=54000000
+RCC.USART6Freq_Value=108000000
+RCC.USBFreq_Value=144000000
+RCC.VCOI2SOutputFreq_Value=384000000
+RCC.VCOInputFreq_Value=2000000
+RCC.VCOOutput2Freq_Value=8000000
+RCC.VCOOutputFreq_Value=432000000
+RCC.VCOSAIOutputFreq_Value=384000000
+RCC.VcooutputI2S=48000000
+RCC.WatchDogFreq_Value=32000
+SH.GPXTI13.0=GPIO_EXTI13
+SH.GPXTI13.ConfNb=1
+USART2.IPParameters=VirtualMode-Asynchronous
+USART2.VirtualMode-Asynchronous=VM_ASYNC
+USART3.IPParameters=VirtualMode-Asynchronous
+USART3.VirtualMode-Asynchronous=VM_ASYNC
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=NUCLEO-F746ZG
+boardIOC=true