Commit 87489b2a by lwc-tester

openocd modifications

parent 1276cc7b
...@@ -7,6 +7,7 @@ ftdi_vid_pid 0x0403 0x6010 ...@@ -7,6 +7,7 @@ ftdi_vid_pid 0x0403 0x6010
# The other channel is used for UART # The other channel is used for UART
ftdi_channel 1 ftdi_channel 1
ftdi_layout_init 0x0018 0x05fb ftdi_layout_init 0x0018 0x05fb
ftdi_serial FT2XCRZ1
# BDBUS4 is connected to JTAG TRST # BDBUS4 is connected to JTAG TRST
ftdi_layout_signal nTRST -data 0x0010 ftdi_layout_signal nTRST -data 0x0010
......
interface ftdi
transport select swd
ftdi_device_desc "FT2232H MiniModule"
ftdi_vid_pid 0x0403 0x6010
ftdi_serial FT2XA9MY
# The other channel is used for UART
ftdi_channel 1
ftdi_layout_init 0x0018 0x05fb
# This is somehow necessary?
ftdi_layout_signal SWD_EN -data 0
# BDBUS4 is connected to System Reset
ftdi_layout_signal nSRST -data 0x0010
#set WORKAREASIZE 0x2000
source [find target/stm32f7x.cfg]
#tpiu config internal swodump.stm32f103-generic.log uart off 72000000
#reset_config srst_only srst_push_pull srst_nogate connect_assert_srst
reset_config srst_only srst_push_pull srst_nogate
#reset_config none srst_push_pull srst_nogate
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or sign in to comment