Skip to content

lwc / compare

Go to a project
Commit 3538b59b by Enrico Pozzobon
Options

Updated build settings and compilers 

Updated compiler versions for some templates, fixed compiler versions on
platformio.ini files, and set optimization flag -O3 on all templates except
Arduino Uno.
parent 343d0c39
Inline Side-by-side
Showing with 2231 additions and 1073 deletions
templates/bluepill/platformio.ini
......@@ -2,9 +2,10 @@
platform = ststm32
framework = arduino
board = bluepill_f103c8_128k
platform_packages = toolchain-gccarmnoneeabi@1.90201.191206
platform_packages =
toolchain-gccarmnoneeabi @ 1.90201.191206
upload_protocol = jlink
build_flags = -O2 -UDEBUG -DNDEBUG
build_flags = -O3 -UDEBUG -DNDEBUG
-D NUM_ANALOG_INPUTS=10
-D NUM_ANALOG_FIRST=20
build_unflags = -Os
......
templates/esp32/platformio.ini
[env:esp32dev]
platform = espressif32
framework = arduino
platform_packages =
toolchain-xtensa32 @ 2.50200.80
board = esp32dev
build_flags = -O2 -UDEBUG -DNDEBUG
build_unflags = -Os
framework = arduino
build_type = release
build_flags =
-O3
-UDEBUG
-DNDEBUG
-DCORE_DEBUG_LEVEL=0
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
build_unflags = -Os
templates/f7/.mxproject
......@@ -5,10 +5,10 @@ SourcePath=/home/enrico/Projects/lwc-compare/templates/f7/Src
SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c;
[PreviousLibFiles]
LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm3.h;
LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/mpu_armv7.h;
[PreviousUsedMakefileFiles]
SourceFiles=Src/main.c;Src/stm32f7xx_it.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;;
SourceFiles=Src/main.c;Src/stm32f7xx_it.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;;
HeaderPath=Drivers/STM32F7xx_HAL_Driver/Inc;Drivers/CMSIS/Device/ST/STM32F7xx/Include;Drivers/CMSIS/Include;Inc;
CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:0;ART_ACCLERATOR_ENABLE:0;STM32F746xx;USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:0;ART_ACCLERATOR_ENABLE:0;
CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:0;ART_ACCLERATOR_ENABLE:0;STM32F746xx;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;
templates/f7/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h
......@@ -12,29 +12,13 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
......@@ -1433,6 +1417,10 @@ typedef struct
/* Analog to Digital Converter */
/* */
/******************************************************************************/
#define VREFINT_CAL_ADDR_CMSIS ((uint16_t*) (0x1FF0F44A)) /*!<Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
#define TEMPSENSOR_CAL1_ADDR_CMSIS ((uint16_t*) (0x1FF0F44C)) /*!<Internal temperature sensor, address of parameter TS_CAL1: On STM32F7, temperature sensor ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
#define TEMPSENSOR_CAL2_ADDR_CMSIS ((uint16_t*) (0x1FF0F44E)) /*!<Internal temperature sensor, address of parameter TS_CAL2: On STM32F7, temperature sensor ADC raw data acquired at temperature 110 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
/******************** Bit definition for ADC_SR register ********************/
#define ADC_SR_AWD_Pos (0U)
#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */
......@@ -8448,104 +8436,236 @@ typedef struct
#define GPIO_MODER_MODER15_1 (0x2UL << GPIO_MODER_MODER15_Pos) /*!< 0x80000000 */
/****************** Bits definition for GPIO_OTYPER register ****************/
#define GPIO_OTYPER_OT_0 0x00000001U
#define GPIO_OTYPER_OT_1 0x00000002U
#define GPIO_OTYPER_OT_2 0x00000004U
#define GPIO_OTYPER_OT_3 0x00000008U
#define GPIO_OTYPER_OT_4 0x00000010U
#define GPIO_OTYPER_OT_5 0x00000020U
#define GPIO_OTYPER_OT_6 0x00000040U
#define GPIO_OTYPER_OT_7 0x00000080U
#define GPIO_OTYPER_OT_8 0x00000100U
#define GPIO_OTYPER_OT_9 0x00000200U
#define GPIO_OTYPER_OT_10 0x00000400U
#define GPIO_OTYPER_OT_11 0x00000800U
#define GPIO_OTYPER_OT_12 0x00001000U
#define GPIO_OTYPER_OT_13 0x00002000U
#define GPIO_OTYPER_OT_14 0x00004000U
#define GPIO_OTYPER_OT_15 0x00008000U
#define GPIO_OTYPER_OT0_Pos (0U)
#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */
#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk
#define GPIO_OTYPER_OT1_Pos (1U)
#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */
#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk
#define GPIO_OTYPER_OT2_Pos (2U)
#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */
#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk
#define GPIO_OTYPER_OT3_Pos (3U)
#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */
#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk
#define GPIO_OTYPER_OT4_Pos (4U)
#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */
#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk
#define GPIO_OTYPER_OT5_Pos (5U)
#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */
#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk
#define GPIO_OTYPER_OT6_Pos (6U)
#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */
#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk
#define GPIO_OTYPER_OT7_Pos (7U)
#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */
#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk
#define GPIO_OTYPER_OT8_Pos (8U)
#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */
#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk
#define GPIO_OTYPER_OT9_Pos (9U)
#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */
#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk
#define GPIO_OTYPER_OT10_Pos (10U)
#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */
#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk
#define GPIO_OTYPER_OT11_Pos (11U)
#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */
#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk
#define GPIO_OTYPER_OT12_Pos (12U)
#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */
#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk
#define GPIO_OTYPER_OT13_Pos (13U)
#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */
#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk
#define GPIO_OTYPER_OT14_Pos (14U)
#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */
#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk
#define GPIO_OTYPER_OT15_Pos (15U)
#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */
#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk
/* Legacy defines */
#define GPIO_OTYPER_OT_0 GPIO_OTYPER_OT0
#define GPIO_OTYPER_OT_1 GPIO_OTYPER_OT1
#define GPIO_OTYPER_OT_2 GPIO_OTYPER_OT2
#define GPIO_OTYPER_OT_3 GPIO_OTYPER_OT3
#define GPIO_OTYPER_OT_4 GPIO_OTYPER_OT4
#define GPIO_OTYPER_OT_5 GPIO_OTYPER_OT5
#define GPIO_OTYPER_OT_6 GPIO_OTYPER_OT6
#define GPIO_OTYPER_OT_7 GPIO_OTYPER_OT7
#define GPIO_OTYPER_OT_8 GPIO_OTYPER_OT8
#define GPIO_OTYPER_OT_9 GPIO_OTYPER_OT9
#define GPIO_OTYPER_OT_10 GPIO_OTYPER_OT10
#define GPIO_OTYPER_OT_11 GPIO_OTYPER_OT11
#define GPIO_OTYPER_OT_12 GPIO_OTYPER_OT12
#define GPIO_OTYPER_OT_13 GPIO_OTYPER_OT13
#define GPIO_OTYPER_OT_14 GPIO_OTYPER_OT14
#define GPIO_OTYPER_OT_15 GPIO_OTYPER_OT15
/****************** Bits definition for GPIO_OSPEEDR register ***************/
#define GPIO_OSPEEDER_OSPEEDR0_Pos (0U)
#define GPIO_OSPEEDER_OSPEEDR0_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR0_Pos) /*!< 0x00000003 */
#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDER_OSPEEDR0_Msk
#define GPIO_OSPEEDER_OSPEEDR0_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR0_Pos) /*!< 0x00000001 */
#define GPIO_OSPEEDER_OSPEEDR0_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR0_Pos) /*!< 0x00000002 */
#define GPIO_OSPEEDER_OSPEEDR1_Pos (2U)
#define GPIO_OSPEEDER_OSPEEDR1_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR1_Pos) /*!< 0x0000000C */
#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDER_OSPEEDR1_Msk
#define GPIO_OSPEEDER_OSPEEDR1_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR1_Pos) /*!< 0x00000004 */
#define GPIO_OSPEEDER_OSPEEDR1_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR1_Pos) /*!< 0x00000008 */
#define GPIO_OSPEEDER_OSPEEDR2_Pos (4U)
#define GPIO_OSPEEDER_OSPEEDR2_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR2_Pos) /*!< 0x00000030 */
#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDER_OSPEEDR2_Msk
#define GPIO_OSPEEDER_OSPEEDR2_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR2_Pos) /*!< 0x00000010 */
#define GPIO_OSPEEDER_OSPEEDR2_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR2_Pos) /*!< 0x00000020 */
#define GPIO_OSPEEDER_OSPEEDR3_Pos (6U)
#define GPIO_OSPEEDER_OSPEEDR3_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR3_Pos) /*!< 0x000000C0 */
#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDER_OSPEEDR3_Msk
#define GPIO_OSPEEDER_OSPEEDR3_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR3_Pos) /*!< 0x00000040 */
#define GPIO_OSPEEDER_OSPEEDR3_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR3_Pos) /*!< 0x00000080 */
#define GPIO_OSPEEDER_OSPEEDR4_Pos (8U)
#define GPIO_OSPEEDER_OSPEEDR4_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR4_Pos) /*!< 0x00000300 */
#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDER_OSPEEDR4_Msk
#define GPIO_OSPEEDER_OSPEEDR4_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR4_Pos) /*!< 0x00000100 */
#define GPIO_OSPEEDER_OSPEEDR4_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR4_Pos) /*!< 0x00000200 */
#define GPIO_OSPEEDER_OSPEEDR5_Pos (10U)
#define GPIO_OSPEEDER_OSPEEDR5_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR5_Pos) /*!< 0x00000C00 */
#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDER_OSPEEDR5_Msk
#define GPIO_OSPEEDER_OSPEEDR5_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR5_Pos) /*!< 0x00000400 */
#define GPIO_OSPEEDER_OSPEEDR5_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR5_Pos) /*!< 0x00000800 */
#define GPIO_OSPEEDER_OSPEEDR6_Pos (12U)
#define GPIO_OSPEEDER_OSPEEDR6_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR6_Pos) /*!< 0x00003000 */
#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDER_OSPEEDR6_Msk
#define GPIO_OSPEEDER_OSPEEDR6_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR6_Pos) /*!< 0x00001000 */
#define GPIO_OSPEEDER_OSPEEDR6_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR6_Pos) /*!< 0x00002000 */
#define GPIO_OSPEEDER_OSPEEDR7_Pos (14U)
#define GPIO_OSPEEDER_OSPEEDR7_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR7_Pos) /*!< 0x0000C000 */
#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDER_OSPEEDR7_Msk
#define GPIO_OSPEEDER_OSPEEDR7_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR7_Pos) /*!< 0x00004000 */
#define GPIO_OSPEEDER_OSPEEDR7_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR7_Pos) /*!< 0x00008000 */
#define GPIO_OSPEEDER_OSPEEDR8_Pos (16U)
#define GPIO_OSPEEDER_OSPEEDR8_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR8_Pos) /*!< 0x00030000 */
#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDER_OSPEEDR8_Msk
#define GPIO_OSPEEDER_OSPEEDR8_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR8_Pos) /*!< 0x00010000 */
#define GPIO_OSPEEDER_OSPEEDR8_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR8_Pos) /*!< 0x00020000 */
#define GPIO_OSPEEDER_OSPEEDR9_Pos (18U)
#define GPIO_OSPEEDER_OSPEEDR9_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR9_Pos) /*!< 0x000C0000 */
#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDER_OSPEEDR9_Msk
#define GPIO_OSPEEDER_OSPEEDR9_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR9_Pos) /*!< 0x00040000 */
#define GPIO_OSPEEDER_OSPEEDR9_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR9_Pos) /*!< 0x00080000 */
#define GPIO_OSPEEDER_OSPEEDR10_Pos (20U)
#define GPIO_OSPEEDER_OSPEEDR10_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR10_Pos) /*!< 0x00300000 */
#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDER_OSPEEDR10_Msk
#define GPIO_OSPEEDER_OSPEEDR10_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR10_Pos) /*!< 0x00100000 */
#define GPIO_OSPEEDER_OSPEEDR10_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR10_Pos) /*!< 0x00200000 */
#define GPIO_OSPEEDER_OSPEEDR11_Pos (22U)
#define GPIO_OSPEEDER_OSPEEDR11_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR11_Pos) /*!< 0x00C00000 */
#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDER_OSPEEDR11_Msk
#define GPIO_OSPEEDER_OSPEEDR11_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR11_Pos) /*!< 0x00400000 */
#define GPIO_OSPEEDER_OSPEEDR11_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR11_Pos) /*!< 0x00800000 */
#define GPIO_OSPEEDER_OSPEEDR12_Pos (24U)
#define GPIO_OSPEEDER_OSPEEDR12_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR12_Pos) /*!< 0x03000000 */
#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDER_OSPEEDR12_Msk
#define GPIO_OSPEEDER_OSPEEDR12_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR12_Pos) /*!< 0x01000000 */
#define GPIO_OSPEEDER_OSPEEDR12_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR12_Pos) /*!< 0x02000000 */
#define GPIO_OSPEEDER_OSPEEDR13_Pos (26U)
#define GPIO_OSPEEDER_OSPEEDR13_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR13_Pos) /*!< 0x0C000000 */
#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDER_OSPEEDR13_Msk
#define GPIO_OSPEEDER_OSPEEDR13_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR13_Pos) /*!< 0x04000000 */
#define GPIO_OSPEEDER_OSPEEDR13_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR13_Pos) /*!< 0x08000000 */
#define GPIO_OSPEEDER_OSPEEDR14_Pos (28U)
#define GPIO_OSPEEDER_OSPEEDR14_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR14_Pos) /*!< 0x30000000 */
#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDER_OSPEEDR14_Msk
#define GPIO_OSPEEDER_OSPEEDR14_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR14_Pos) /*!< 0x10000000 */
#define GPIO_OSPEEDER_OSPEEDR14_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR14_Pos) /*!< 0x20000000 */
#define GPIO_OSPEEDER_OSPEEDR15_Pos (30U)
#define GPIO_OSPEEDER_OSPEEDR15_Msk (0x3UL << GPIO_OSPEEDER_OSPEEDR15_Pos) /*!< 0xC0000000 */
#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDER_OSPEEDR15_Msk
#define GPIO_OSPEEDER_OSPEEDR15_0 (0x1UL << GPIO_OSPEEDER_OSPEEDR15_Pos) /*!< 0x40000000 */
#define GPIO_OSPEEDER_OSPEEDR15_1 (0x2UL << GPIO_OSPEEDER_OSPEEDR15_Pos) /*!< 0x80000000 */
#define GPIO_OSPEEDR_OSPEEDR0_Pos (0U)
#define GPIO_OSPEEDR_OSPEEDR0_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR0_Pos) /*!< 0x00000003 */
#define GPIO_OSPEEDR_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0_Msk
#define GPIO_OSPEEDR_OSPEEDR0_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR0_Pos) /*!< 0x00000001 */
#define GPIO_OSPEEDR_OSPEEDR0_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR0_Pos) /*!< 0x00000002 */
#define GPIO_OSPEEDR_OSPEEDR1_Pos (2U)
#define GPIO_OSPEEDR_OSPEEDR1_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR1_Pos) /*!< 0x0000000C */
#define GPIO_OSPEEDR_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1_Msk
#define GPIO_OSPEEDR_OSPEEDR1_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR1_Pos) /*!< 0x00000004 */
#define GPIO_OSPEEDR_OSPEEDR1_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR1_Pos) /*!< 0x00000008 */
#define GPIO_OSPEEDR_OSPEEDR2_Pos (4U)
#define GPIO_OSPEEDR_OSPEEDR2_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR2_Pos) /*!< 0x00000030 */
#define GPIO_OSPEEDR_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2_Msk
#define GPIO_OSPEEDR_OSPEEDR2_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR2_Pos) /*!< 0x00000010 */
#define GPIO_OSPEEDR_OSPEEDR2_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR2_Pos) /*!< 0x00000020 */
#define GPIO_OSPEEDR_OSPEEDR3_Pos (6U)
#define GPIO_OSPEEDR_OSPEEDR3_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR3_Pos) /*!< 0x000000C0 */
#define GPIO_OSPEEDR_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3_Msk
#define GPIO_OSPEEDR_OSPEEDR3_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR3_Pos) /*!< 0x00000040 */
#define GPIO_OSPEEDR_OSPEEDR3_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR3_Pos) /*!< 0x00000080 */
#define GPIO_OSPEEDR_OSPEEDR4_Pos (8U)
#define GPIO_OSPEEDR_OSPEEDR4_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR4_Pos) /*!< 0x00000300 */
#define GPIO_OSPEEDR_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4_Msk
#define GPIO_OSPEEDR_OSPEEDR4_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR4_Pos) /*!< 0x00000100 */
#define GPIO_OSPEEDR_OSPEEDR4_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR4_Pos) /*!< 0x00000200 */
#define GPIO_OSPEEDR_OSPEEDR5_Pos (10U)
#define GPIO_OSPEEDR_OSPEEDR5_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR5_Pos) /*!< 0x00000C00 */
#define GPIO_OSPEEDR_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5_Msk
#define GPIO_OSPEEDR_OSPEEDR5_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR5_Pos) /*!< 0x00000400 */
#define GPIO_OSPEEDR_OSPEEDR5_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR5_Pos) /*!< 0x00000800 */
#define GPIO_OSPEEDR_OSPEEDR6_Pos (12U)
#define GPIO_OSPEEDR_OSPEEDR6_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR6_Pos) /*!< 0x00003000 */
#define GPIO_OSPEEDR_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6_Msk
#define GPIO_OSPEEDR_OSPEEDR6_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR6_Pos) /*!< 0x00001000 */
#define GPIO_OSPEEDR_OSPEEDR6_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR6_Pos) /*!< 0x00002000 */
#define GPIO_OSPEEDR_OSPEEDR7_Pos (14U)
#define GPIO_OSPEEDR_OSPEEDR7_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR7_Pos) /*!< 0x0000C000 */
#define GPIO_OSPEEDR_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7_Msk
#define GPIO_OSPEEDR_OSPEEDR7_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR7_Pos) /*!< 0x00004000 */
#define GPIO_OSPEEDR_OSPEEDR7_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR7_Pos) /*!< 0x00008000 */
#define GPIO_OSPEEDR_OSPEEDR8_Pos (16U)
#define GPIO_OSPEEDR_OSPEEDR8_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR8_Pos) /*!< 0x00030000 */
#define GPIO_OSPEEDR_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8_Msk
#define GPIO_OSPEEDR_OSPEEDR8_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR8_Pos) /*!< 0x00010000 */
#define GPIO_OSPEEDR_OSPEEDR8_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR8_Pos) /*!< 0x00020000 */
#define GPIO_OSPEEDR_OSPEEDR9_Pos (18U)
#define GPIO_OSPEEDR_OSPEEDR9_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR9_Pos) /*!< 0x000C0000 */
#define GPIO_OSPEEDR_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9_Msk
#define GPIO_OSPEEDR_OSPEEDR9_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR9_Pos) /*!< 0x00040000 */
#define GPIO_OSPEEDR_OSPEEDR9_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR9_Pos) /*!< 0x00080000 */
#define GPIO_OSPEEDR_OSPEEDR10_Pos (20U)
#define GPIO_OSPEEDR_OSPEEDR10_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR10_Pos) /*!< 0x00300000 */
#define GPIO_OSPEEDR_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10_Msk
#define GPIO_OSPEEDR_OSPEEDR10_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR10_Pos) /*!< 0x00100000 */
#define GPIO_OSPEEDR_OSPEEDR10_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR10_Pos) /*!< 0x00200000 */
#define GPIO_OSPEEDR_OSPEEDR11_Pos (22U)
#define GPIO_OSPEEDR_OSPEEDR11_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR11_Pos) /*!< 0x00C00000 */
#define GPIO_OSPEEDR_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11_Msk
#define GPIO_OSPEEDR_OSPEEDR11_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR11_Pos) /*!< 0x00400000 */
#define GPIO_OSPEEDR_OSPEEDR11_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR11_Pos) /*!< 0x00800000 */
#define GPIO_OSPEEDR_OSPEEDR12_Pos (24U)
#define GPIO_OSPEEDR_OSPEEDR12_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR12_Pos) /*!< 0x03000000 */
#define GPIO_OSPEEDR_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12_Msk
#define GPIO_OSPEEDR_OSPEEDR12_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR12_Pos) /*!< 0x01000000 */
#define GPIO_OSPEEDR_OSPEEDR12_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR12_Pos) /*!< 0x02000000 */
#define GPIO_OSPEEDR_OSPEEDR13_Pos (26U)
#define GPIO_OSPEEDR_OSPEEDR13_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR13_Pos) /*!< 0x0C000000 */
#define GPIO_OSPEEDR_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13_Msk
#define GPIO_OSPEEDR_OSPEEDR13_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR13_Pos) /*!< 0x04000000 */
#define GPIO_OSPEEDR_OSPEEDR13_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR13_Pos) /*!< 0x08000000 */
#define GPIO_OSPEEDR_OSPEEDR14_Pos (28U)
#define GPIO_OSPEEDR_OSPEEDR14_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR14_Pos) /*!< 0x30000000 */
#define GPIO_OSPEEDR_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14_Msk
#define GPIO_OSPEEDR_OSPEEDR14_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR14_Pos) /*!< 0x10000000 */
#define GPIO_OSPEEDR_OSPEEDR14_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR14_Pos) /*!< 0x20000000 */
#define GPIO_OSPEEDR_OSPEEDR15_Pos (30U)
#define GPIO_OSPEEDR_OSPEEDR15_Msk (0x3UL << GPIO_OSPEEDR_OSPEEDR15_Pos) /*!< 0xC0000000 */
#define GPIO_OSPEEDR_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15_Msk
#define GPIO_OSPEEDR_OSPEEDR15_0 (0x1UL << GPIO_OSPEEDR_OSPEEDR15_Pos) /*!< 0x40000000 */
#define GPIO_OSPEEDR_OSPEEDR15_1 (0x2UL << GPIO_OSPEEDR_OSPEEDR15_Pos) /*!< 0x80000000 */
/* legacy defines */
#define GPIO_OSPEEDER_OSPEEDR0_Pos GPIO_OSPEEDR_OSPEEDR0_Pos
#define GPIO_OSPEEDER_OSPEEDR0_Msk GPIO_OSPEEDR_OSPEEDR0_Msk
#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
#define GPIO_OSPEEDER_OSPEEDR1_Pos GPIO_OSPEEDR_OSPEEDR1_Pos
#define GPIO_OSPEEDER_OSPEEDR1_Msk GPIO_OSPEEDR_OSPEEDR1_Msk
#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
#define GPIO_OSPEEDER_OSPEEDR2_Pos GPIO_OSPEEDR_OSPEEDR2_Pos
#define GPIO_OSPEEDER_OSPEEDR2_Msk GPIO_OSPEEDR_OSPEEDR2_Msk
#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
#define GPIO_OSPEEDER_OSPEEDR3_Pos GPIO_OSPEEDR_OSPEEDR3_Pos
#define GPIO_OSPEEDER_OSPEEDR3_Msk GPIO_OSPEEDR_OSPEEDR3_Msk
#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
#define GPIO_OSPEEDER_OSPEEDR4_Pos GPIO_OSPEEDR_OSPEEDR4_Pos
#define GPIO_OSPEEDER_OSPEEDR4_Msk GPIO_OSPEEDR_OSPEEDR4_Msk
#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
#define GPIO_OSPEEDER_OSPEEDR5_Pos GPIO_OSPEEDR_OSPEEDR5_Pos
#define GPIO_OSPEEDER_OSPEEDR5_Msk GPIO_OSPEEDR_OSPEEDR5_Msk
#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
#define GPIO_OSPEEDER_OSPEEDR6_Pos GPIO_OSPEEDR_OSPEEDR6_Pos
#define GPIO_OSPEEDER_OSPEEDR6_Msk GPIO_OSPEEDR_OSPEEDR6_Msk
#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
#define GPIO_OSPEEDER_OSPEEDR7_Pos GPIO_OSPEEDR_OSPEEDR7_Pos
#define GPIO_OSPEEDER_OSPEEDR7_Msk GPIO_OSPEEDR_OSPEEDR7_Msk
#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
#define GPIO_OSPEEDER_OSPEEDR8_Pos GPIO_OSPEEDR_OSPEEDR8_Pos
#define GPIO_OSPEEDER_OSPEEDR8_Msk GPIO_OSPEEDR_OSPEEDR8_Msk
#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
#define GPIO_OSPEEDER_OSPEEDR9_Pos GPIO_OSPEEDR_OSPEEDR9_Pos
#define GPIO_OSPEEDER_OSPEEDR9_Msk GPIO_OSPEEDR_OSPEEDR9_Msk
#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
#define GPIO_OSPEEDER_OSPEEDR10_Pos GPIO_OSPEEDR_OSPEEDR10_Pos
#define GPIO_OSPEEDER_OSPEEDR10_Msk GPIO_OSPEEDR_OSPEEDR10_Msk
#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
#define GPIO_OSPEEDER_OSPEEDR11_Pos GPIO_OSPEEDR_OSPEEDR11_Pos
#define GPIO_OSPEEDER_OSPEEDR11_Msk GPIO_OSPEEDR_OSPEEDR11_Msk
#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
#define GPIO_OSPEEDER_OSPEEDR12_Pos GPIO_OSPEEDR_OSPEEDR12_Pos
#define GPIO_OSPEEDER_OSPEEDR12_Msk GPIO_OSPEEDR_OSPEEDR12_Msk
#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
#define GPIO_OSPEEDER_OSPEEDR13_Pos GPIO_OSPEEDR_OSPEEDR13_Pos
#define GPIO_OSPEEDER_OSPEEDR13_Msk GPIO_OSPEEDR_OSPEEDR13_Msk
#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
#define GPIO_OSPEEDER_OSPEEDR14_Pos GPIO_OSPEEDR_OSPEEDR14_Pos
#define GPIO_OSPEEDER_OSPEEDR14_Msk GPIO_OSPEEDR_OSPEEDR14_Msk
#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
#define GPIO_OSPEEDER_OSPEEDR15_Pos GPIO_OSPEEDR_OSPEEDR15_Pos
#define GPIO_OSPEEDER_OSPEEDR15_Msk GPIO_OSPEEDR_OSPEEDR15_Msk
#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
/****************** Bits definition for GPIO_PUPDR register *****************/
#define GPIO_PUPDR_PUPDR0_Pos (0U)
......@@ -8630,74 +8750,272 @@ typedef struct
#define GPIO_PUPDR_PUPDR15_1 (0x2UL << GPIO_PUPDR_PUPDR15_Pos) /*!< 0x80000000 */
/****************** Bits definition for GPIO_IDR register *******************/
#define GPIO_IDR_IDR_0 0x00000001U
#define GPIO_IDR_IDR_1 0x00000002U
#define GPIO_IDR_IDR_2 0x00000004U
#define GPIO_IDR_IDR_3 0x00000008U
#define GPIO_IDR_IDR_4 0x00000010U
#define GPIO_IDR_IDR_5 0x00000020U
#define GPIO_IDR_IDR_6 0x00000040U
#define GPIO_IDR_IDR_7 0x00000080U
#define GPIO_IDR_IDR_8 0x00000100U
#define GPIO_IDR_IDR_9 0x00000200U
#define GPIO_IDR_IDR_10 0x00000400U
#define GPIO_IDR_IDR_11 0x00000800U
#define GPIO_IDR_IDR_12 0x00001000U
#define GPIO_IDR_IDR_13 0x00002000U
#define GPIO_IDR_IDR_14 0x00004000U
#define GPIO_IDR_IDR_15 0x00008000U
#define GPIO_IDR_ID0_Pos (0U)
#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */
#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk
#define GPIO_IDR_ID1_Pos (1U)
#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */
#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk
#define GPIO_IDR_ID2_Pos (2U)
#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */
#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk
#define GPIO_IDR_ID3_Pos (3U)
#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */
#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk
#define GPIO_IDR_ID4_Pos (4U)
#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */
#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk
#define GPIO_IDR_ID5_Pos (5U)
#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */
#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk
#define GPIO_IDR_ID6_Pos (6U)
#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */
#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk
#define GPIO_IDR_ID7_Pos (7U)
#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */
#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk
#define GPIO_IDR_ID8_Pos (8U)
#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */
#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk
#define GPIO_IDR_ID9_Pos (9U)
#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */
#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk
#define GPIO_IDR_ID10_Pos (10U)
#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */
#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk
#define GPIO_IDR_ID11_Pos (11U)
#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */
#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk
#define GPIO_IDR_ID12_Pos (12U)
#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */
#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk
#define GPIO_IDR_ID13_Pos (13U)
#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */
#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk
#define GPIO_IDR_ID14_Pos (14U)
#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */
#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk
#define GPIO_IDR_ID15_Pos (15U)
#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */
#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk
/* Legacy defines */
#define GPIO_IDR_IDR_0 GPIO_IDR_ID0
#define GPIO_IDR_IDR_1 GPIO_IDR_ID1
#define GPIO_IDR_IDR_2 GPIO_IDR_ID2
#define GPIO_IDR_IDR_3 GPIO_IDR_ID3
#define GPIO_IDR_IDR_4 GPIO_IDR_ID4
#define GPIO_IDR_IDR_5 GPIO_IDR_ID5
#define GPIO_IDR_IDR_6 GPIO_IDR_ID6
#define GPIO_IDR_IDR_7 GPIO_IDR_ID7
#define GPIO_IDR_IDR_8 GPIO_IDR_ID8
#define GPIO_IDR_IDR_9 GPIO_IDR_ID9
#define GPIO_IDR_IDR_10 GPIO_IDR_ID10
#define GPIO_IDR_IDR_11 GPIO_IDR_ID11
#define GPIO_IDR_IDR_12 GPIO_IDR_ID12
#define GPIO_IDR_IDR_13 GPIO_IDR_ID13
#define GPIO_IDR_IDR_14 GPIO_IDR_ID14
#define GPIO_IDR_IDR_15 GPIO_IDR_ID15
/****************** Bits definition for GPIO_ODR register *******************/
#define GPIO_ODR_ODR_0 0x00000001U
#define GPIO_ODR_ODR_1 0x00000002U
#define GPIO_ODR_ODR_2 0x00000004U
#define GPIO_ODR_ODR_3 0x00000008U
#define GPIO_ODR_ODR_4 0x00000010U
#define GPIO_ODR_ODR_5 0x00000020U
#define GPIO_ODR_ODR_6 0x00000040U
#define GPIO_ODR_ODR_7 0x00000080U
#define GPIO_ODR_ODR_8 0x00000100U
#define GPIO_ODR_ODR_9 0x00000200U
#define GPIO_ODR_ODR_10 0x00000400U
#define GPIO_ODR_ODR_11 0x00000800U
#define GPIO_ODR_ODR_12 0x00001000U
#define GPIO_ODR_ODR_13 0x00002000U
#define GPIO_ODR_ODR_14 0x00004000U
#define GPIO_ODR_ODR_15 0x00008000U
#define GPIO_ODR_OD0_Pos (0U)
#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */
#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk
#define GPIO_ODR_OD1_Pos (1U)
#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */
#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk
#define GPIO_ODR_OD2_Pos (2U)
#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */
#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk
#define GPIO_ODR_OD3_Pos (3U)
#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */
#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk
#define GPIO_ODR_OD4_Pos (4U)
#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */
#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk
#define GPIO_ODR_OD5_Pos (5U)
#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */
#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk
#define GPIO_ODR_OD6_Pos (6U)
#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */
#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk
#define GPIO_ODR_OD7_Pos (7U)
#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */
#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk
#define GPIO_ODR_OD8_Pos (8U)
#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */
#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk
#define GPIO_ODR_OD9_Pos (9U)
#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */
#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk
#define GPIO_ODR_OD10_Pos (10U)
#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */
#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk
#define GPIO_ODR_OD11_Pos (11U)
#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */
#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk
#define GPIO_ODR_OD12_Pos (12U)
#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */
#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk
#define GPIO_ODR_OD13_Pos (13U)
#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */
#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk
#define GPIO_ODR_OD14_Pos (14U)
#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */
#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk
#define GPIO_ODR_OD15_Pos (15U)
#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */
#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk
/* Legacy defines */
#define GPIO_ODR_ODR_0 GPIO_ODR_OD0
#define GPIO_ODR_ODR_1 GPIO_ODR_OD1
#define GPIO_ODR_ODR_2 GPIO_ODR_OD2
#define GPIO_ODR_ODR_3 GPIO_ODR_OD3
#define GPIO_ODR_ODR_4 GPIO_ODR_OD4
#define GPIO_ODR_ODR_5 GPIO_ODR_OD5
#define GPIO_ODR_ODR_6 GPIO_ODR_OD6
#define GPIO_ODR_ODR_7 GPIO_ODR_OD7
#define GPIO_ODR_ODR_8 GPIO_ODR_OD8
#define GPIO_ODR_ODR_9 GPIO_ODR_OD9
#define GPIO_ODR_ODR_10 GPIO_ODR_OD10
#define GPIO_ODR_ODR_11 GPIO_ODR_OD11
#define GPIO_ODR_ODR_12 GPIO_ODR_OD12
#define GPIO_ODR_ODR_13 GPIO_ODR_OD13
#define GPIO_ODR_ODR_14 GPIO_ODR_OD14
#define GPIO_ODR_ODR_15 GPIO_ODR_OD15
/****************** Bits definition for GPIO_BSRR register ******************/
#define GPIO_BSRR_BS_0 0x00000001U
#define GPIO_BSRR_BS_1 0x00000002U
#define GPIO_BSRR_BS_2 0x00000004U
#define GPIO_BSRR_BS_3 0x00000008U
#define GPIO_BSRR_BS_4 0x00000010U
#define GPIO_BSRR_BS_5 0x00000020U
#define GPIO_BSRR_BS_6 0x00000040U
#define GPIO_BSRR_BS_7 0x00000080U
#define GPIO_BSRR_BS_8 0x00000100U
#define GPIO_BSRR_BS_9 0x00000200U
#define GPIO_BSRR_BS_10 0x00000400U
#define GPIO_BSRR_BS_11 0x00000800U
#define GPIO_BSRR_BS_12 0x00001000U
#define GPIO_BSRR_BS_13 0x00002000U
#define GPIO_BSRR_BS_14 0x00004000U
#define GPIO_BSRR_BS_15 0x00008000U
#define GPIO_BSRR_BR_0 0x00010000U
#define GPIO_BSRR_BR_1 0x00020000U
#define GPIO_BSRR_BR_2 0x00040000U
#define GPIO_BSRR_BR_3 0x00080000U
#define GPIO_BSRR_BR_4 0x00100000U
#define GPIO_BSRR_BR_5 0x00200000U
#define GPIO_BSRR_BR_6 0x00400000U
#define GPIO_BSRR_BR_7 0x00800000U
#define GPIO_BSRR_BR_8 0x01000000U
#define GPIO_BSRR_BR_9 0x02000000U
#define GPIO_BSRR_BR_10 0x04000000U
#define GPIO_BSRR_BR_11 0x08000000U
#define GPIO_BSRR_BR_12 0x10000000U
#define GPIO_BSRR_BR_13 0x20000000U
#define GPIO_BSRR_BR_14 0x40000000U
#define GPIO_BSRR_BR_15 0x80000000U
#define GPIO_BSRR_BS0_Pos (0U)
#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */
#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk
#define GPIO_BSRR_BS1_Pos (1U)
#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */
#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk
#define GPIO_BSRR_BS2_Pos (2U)
#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */
#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk
#define GPIO_BSRR_BS3_Pos (3U)
#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */
#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk
#define GPIO_BSRR_BS4_Pos (4U)
#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */
#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk
#define GPIO_BSRR_BS5_Pos (5U)
#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */
#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk
#define GPIO_BSRR_BS6_Pos (6U)
#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */
#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk
#define GPIO_BSRR_BS7_Pos (7U)
#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */
#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk
#define GPIO_BSRR_BS8_Pos (8U)
#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */
#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk
#define GPIO_BSRR_BS9_Pos (9U)
#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */
#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk
#define GPIO_BSRR_BS10_Pos (10U)
#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */
#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk
#define GPIO_BSRR_BS11_Pos (11U)
#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */
#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk
#define GPIO_BSRR_BS12_Pos (12U)
#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */
#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk
#define GPIO_BSRR_BS13_Pos (13U)
#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */
#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk
#define GPIO_BSRR_BS14_Pos (14U)
#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */
#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk
#define GPIO_BSRR_BS15_Pos (15U)
#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */
#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk
#define GPIO_BSRR_BR0_Pos (16U)
#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */
#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk
#define GPIO_BSRR_BR1_Pos (17U)
#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */
#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk
#define GPIO_BSRR_BR2_Pos (18U)
#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */
#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk
#define GPIO_BSRR_BR3_Pos (19U)
#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */
#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk
#define GPIO_BSRR_BR4_Pos (20U)
#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */
#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk
#define GPIO_BSRR_BR5_Pos (21U)
#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */
#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk
#define GPIO_BSRR_BR6_Pos (22U)
#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */
#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk
#define GPIO_BSRR_BR7_Pos (23U)
#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */
#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk
#define GPIO_BSRR_BR8_Pos (24U)
#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */
#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk
#define GPIO_BSRR_BR9_Pos (25U)
#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */
#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk
#define GPIO_BSRR_BR10_Pos (26U)
#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */
#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk
#define GPIO_BSRR_BR11_Pos (27U)
#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */
#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk
#define GPIO_BSRR_BR12_Pos (28U)
#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */
#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk
#define GPIO_BSRR_BR13_Pos (29U)
#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */
#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk
#define GPIO_BSRR_BR14_Pos (30U)
#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */
#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk
#define GPIO_BSRR_BR15_Pos (31U)
#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */
#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk
/* Legacy defines */
#define GPIO_BSRR_BS_0 GPIO_BSRR_BS0
#define GPIO_BSRR_BS_1 GPIO_BSRR_BS1
#define GPIO_BSRR_BS_2 GPIO_BSRR_BS2
#define GPIO_BSRR_BS_3 GPIO_BSRR_BS3
#define GPIO_BSRR_BS_4 GPIO_BSRR_BS4
#define GPIO_BSRR_BS_5 GPIO_BSRR_BS5
#define GPIO_BSRR_BS_6 GPIO_BSRR_BS6
#define GPIO_BSRR_BS_7 GPIO_BSRR_BS7
#define GPIO_BSRR_BS_8 GPIO_BSRR_BS8
#define GPIO_BSRR_BS_9 GPIO_BSRR_BS9
#define GPIO_BSRR_BS_10 GPIO_BSRR_BS10
#define GPIO_BSRR_BS_11 GPIO_BSRR_BS11
#define GPIO_BSRR_BS_12 GPIO_BSRR_BS12
#define GPIO_BSRR_BS_13 GPIO_BSRR_BS13
#define GPIO_BSRR_BS_14 GPIO_BSRR_BS14
#define GPIO_BSRR_BS_15 GPIO_BSRR_BS15
#define GPIO_BSRR_BR_0 GPIO_BSRR_BR0
#define GPIO_BSRR_BR_1 GPIO_BSRR_BR1
#define GPIO_BSRR_BR_2 GPIO_BSRR_BR2
#define GPIO_BSRR_BR_3 GPIO_BSRR_BR3
#define GPIO_BSRR_BR_4 GPIO_BSRR_BR4
#define GPIO_BSRR_BR_5 GPIO_BSRR_BR5
#define GPIO_BSRR_BR_6 GPIO_BSRR_BR6
#define GPIO_BSRR_BR_7 GPIO_BSRR_BR7
#define GPIO_BSRR_BR_8 GPIO_BSRR_BR8
#define GPIO_BSRR_BR_9 GPIO_BSRR_BR9
#define GPIO_BSRR_BR_10 GPIO_BSRR_BR10
#define GPIO_BSRR_BR_11 GPIO_BSRR_BR11
#define GPIO_BSRR_BR_12 GPIO_BSRR_BR12
#define GPIO_BSRR_BR_13 GPIO_BSRR_BR13
#define GPIO_BSRR_BR_14 GPIO_BSRR_BR14
#define GPIO_BSRR_BR_15 GPIO_BSRR_BR15
/****************** Bit definition for GPIO_LCKR register *********************/
#define GPIO_LCKR_LCK0_Pos (0U)
......@@ -16243,49 +16561,6 @@ typedef struct
#define USB_OTG_FRMNUM_2 (0x4UL << USB_OTG_FRMNUM_Pos) /*!< 0x00800000 */
#define USB_OTG_FRMNUM_3 (0x8UL << USB_OTG_FRMNUM_Pos) /*!< 0x01000000 */
/******************** Bit definition for OTG register ********************/
#define USB_OTG_CHNUM_Pos (0U)
#define USB_OTG_CHNUM_Msk (0xFUL << USB_OTG_CHNUM_Pos) /*!< 0x0000000F */
#define USB_OTG_CHNUM USB_OTG_CHNUM_Msk /*!< Channel number */
#define USB_OTG_CHNUM_0 (0x1UL << USB_OTG_CHNUM_Pos) /*!< 0x00000001 */
#define USB_OTG_CHNUM_1 (0x2UL << USB_OTG_CHNUM_Pos) /*!< 0x00000002 */
#define USB_OTG_CHNUM_2 (0x4UL << USB_OTG_CHNUM_Pos) /*!< 0x00000004 */
#define USB_OTG_CHNUM_3 (0x8UL << USB_OTG_CHNUM_Pos) /*!< 0x00000008 */
#define USB_OTG_BCNT_Pos (4U)
#define USB_OTG_BCNT_Msk (0x7FFUL << USB_OTG_BCNT_Pos) /*!< 0x00007FF0 */
#define USB_OTG_BCNT USB_OTG_BCNT_Msk /*!< Byte count */
#define USB_OTG_DPID_Pos (15U)
#define USB_OTG_DPID_Msk (0x3UL << USB_OTG_DPID_Pos) /*!< 0x00018000 */
#define USB_OTG_DPID USB_OTG_DPID_Msk /*!< Data PID */
#define USB_OTG_DPID_0 (0x1UL << USB_OTG_DPID_Pos) /*!< 0x00008000 */
#define USB_OTG_DPID_1 (0x2UL << USB_OTG_DPID_Pos) /*!< 0x00010000 */
#define USB_OTG_PKTSTS_Pos (17U)
#define USB_OTG_PKTSTS_Msk (0xFUL << USB_OTG_PKTSTS_Pos) /*!< 0x001E0000 */
#define USB_OTG_PKTSTS USB_OTG_PKTSTS_Msk /*!< Packet status */
#define USB_OTG_PKTSTS_0 (0x1UL << USB_OTG_PKTSTS_Pos) /*!< 0x00020000 */
#define USB_OTG_PKTSTS_1 (0x2UL << USB_OTG_PKTSTS_Pos) /*!< 0x00040000 */
#define USB_OTG_PKTSTS_2 (0x4UL << USB_OTG_PKTSTS_Pos) /*!< 0x00080000 */
#define USB_OTG_PKTSTS_3 (0x8UL << USB_OTG_PKTSTS_Pos) /*!< 0x00100000 */
#define USB_OTG_EPNUM_Pos (0U)
#define USB_OTG_EPNUM_Msk (0xFUL << USB_OTG_EPNUM_Pos) /*!< 0x0000000F */
#define USB_OTG_EPNUM USB_OTG_EPNUM_Msk /*!< Endpoint number */
#define USB_OTG_EPNUM_0 (0x1UL << USB_OTG_EPNUM_Pos) /*!< 0x00000001 */
#define USB_OTG_EPNUM_1 (0x2UL << USB_OTG_EPNUM_Pos) /*!< 0x00000002 */
#define USB_OTG_EPNUM_2 (0x4UL << USB_OTG_EPNUM_Pos) /*!< 0x00000004 */
#define USB_OTG_EPNUM_3 (0x8UL << USB_OTG_EPNUM_Pos) /*!< 0x00000008 */
#define USB_OTG_FRMNUM_Pos (21U)
#define USB_OTG_FRMNUM_Msk (0xFUL << USB_OTG_FRMNUM_Pos) /*!< 0x01E00000 */
#define USB_OTG_FRMNUM USB_OTG_FRMNUM_Msk /*!< Frame number */
#define USB_OTG_FRMNUM_0 (0x1UL << USB_OTG_FRMNUM_Pos) /*!< 0x00200000 */
#define USB_OTG_FRMNUM_1 (0x2UL << USB_OTG_FRMNUM_Pos) /*!< 0x00400000 */
#define USB_OTG_FRMNUM_2 (0x4UL << USB_OTG_FRMNUM_Pos) /*!< 0x00800000 */
#define USB_OTG_FRMNUM_3 (0x8UL << USB_OTG_FRMNUM_Pos) /*!< 0x01000000 */
/******************** Bit definition for USB_OTG_GRXFSIZ register ********************/
#define USB_OTG_GRXFSIZ_RXFD_Pos (0U)
#define USB_OTG_GRXFSIZ_RXFD_Msk (0xFFFFUL << USB_OTG_GRXFSIZ_RXFD_Pos) /*!< 0x0000FFFF */
......@@ -17409,17 +17684,6 @@ typedef struct
(((__INSTANCE__) == TIM1) || \
((__INSTANCE__) == TIM8) )
/****************** TIM Instances : supporting synchronization ****************/
#define IS_TIM_SYNCHRO_INSTANCE(__INSTANCE__)\
(((__INSTANCE__) == TIM1) || \
((__INSTANCE__) == TIM2) || \
((__INSTANCE__) == TIM3) || \
((__INSTANCE__) == TIM4) || \
((__INSTANCE__) == TIM5) || \
((__INSTANCE__) == TIM6) || \
((__INSTANCE__) == TIM7) || \
((__INSTANCE__) == TIM8))
/****************** TIM Instances : supporting clock division *****************/
#define IS_TIM_CLOCK_DIVISION_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
((__INSTANCE__) == TIM2) || \
templates/f7/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h
......@@ -16,29 +16,13 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
......@@ -72,10 +56,10 @@
/* Uncomment the line below according to the target STM32 device used in your
application
*/
#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) && !defined (STM32F767xx) && \
!defined (STM32F769xx) && !defined (STM32F777xx) && !defined (STM32F779xx) && !defined (STM32F722xx) && \
!defined (STM32F723xx) && !defined (STM32F732xx) && !defined (STM32F733xx) && !defined (STM32F730xx) && \
!defined (STM32F750xx)
#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) && !defined (STM32F765xx) && \
!defined (STM32F767xx) && !defined (STM32F769xx) && !defined (STM32F777xx) && !defined (STM32F779xx) && \
!defined (STM32F722xx) && !defined (STM32F723xx) && !defined (STM32F732xx) && !defined (STM32F733xx) && \
!defined (STM32F730xx) && !defined (STM32F750xx)
/* #define STM32F756xx */ /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG,
STM32F756NG Devices */
......@@ -113,11 +97,11 @@
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number V1.2.4
* @brief CMSIS Device version number V1.2.5
*/
#define __STM32F7_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __STM32F7_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
#define __STM32F7_CMSIS_VERSION_SUB2 (0x04) /*!< [15:8] sub2 version */
#define __STM32F7_CMSIS_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */
#define __STM32F7_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32F7_CMSIS_VERSION ((__STM32F7_CMSIS_VERSION_MAIN << 24)\
|(__STM32F7_CMSIS_VERSION_SUB1 << 16)\
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
......@@ -7,7 +7,7 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
......@@ -236,6 +236,16 @@
#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
#if defined(STM32G4) || defined(STM32H7)
#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL
#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL
#endif
#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4)
#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID
#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID
#endif
/**
* @}
*/
......@@ -296,8 +306,17 @@
#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING
#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING
#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI
#endif
#endif /* STM32L4 */
#if defined(STM32G0)
#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1
#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2
#endif
#if defined(STM32H7)
#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
......@@ -355,6 +374,9 @@
#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT
#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT
#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT
#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT
#endif /* STM32H7 */
/**
......@@ -450,7 +472,9 @@
#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2
#endif
#define FLASH_FLAG_WDW FLASH_FLAG_WBNE
#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL
#endif /* STM32H7 */
/**
* @}
......@@ -486,6 +510,13 @@
#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
#if defined(STM32G4)
#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster
#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster
#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD
#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD
#endif /* STM32G4 */
/**
* @}
*/
......@@ -494,7 +525,7 @@
/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
* @{
*/
#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7)
#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4)
#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
......@@ -547,18 +578,25 @@
#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2
#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2
#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2
#endif
#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \
defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx)
#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS
#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS
#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS
#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */
#endif /* STM32H7 */
#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32H7)
#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32H7*/
#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
#if defined(STM32L1)
#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
......@@ -599,6 +637,185 @@
#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
#if defined(STM32G4)
#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig
#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable
#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable
#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset
#endif /* STM32G4 */
#if defined(STM32H7)
#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
#endif /* STM32H7 */
#if defined(STM32F3)
/** @brief Constants defining available sources associated to external events.
*/
#define HRTIM_EVENTSRC_1 (0x00000000U)
#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0)
#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1)
#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0)
/** @brief Constants defining the events that can be selected to configure the
* set/reset crossbar of a timer output
*/
#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1)
#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2)
#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3)
#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4)
#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5)
#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6)
#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7)
#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8)
#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9)
#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1)
#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2)
#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3)
#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4)
#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5)
#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6)
#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7)
#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8)
#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9)
/** @brief Constants defining the event filtering applied to external events
* by a timer
*/
#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U)
#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0)
#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1)
#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2)
#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
/** @brief Constants defining the DLL calibration periods (in micro seconds)
*/
#define HRTIM_CALIBRATIONRATE_7300 0x00000000U
#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0)
#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1)
#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0)
#endif /* STM32F3 */
/**
* @}
*/
......@@ -738,6 +955,12 @@
#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7)
#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID
#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID
#endif
/**
* @}
*/
......@@ -753,7 +976,6 @@
#define I2S_FLAG_TXE I2S_FLAG_TXP
#define I2S_FLAG_RXNE I2S_FLAG_RXP
#define I2S_FLAG_FRE I2S_FLAG_TIFRE
#endif
#if defined(STM32F7)
......@@ -824,6 +1046,16 @@
#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
#if defined(STM32H7)
#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X
#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT
#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1
#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2
#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3
#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL
#endif /* STM32H7 */
/**
* @}
*/
......@@ -971,6 +1203,24 @@
#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE
#endif
#if defined(STM32H7)
#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1
#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2
#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1
#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2
#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1
#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2
#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1
#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1
#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2
#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1
#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2
#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2
#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1
#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2
#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2
#endif
/**
* @}
*/
......@@ -1199,6 +1449,30 @@
#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
#if defined(STM32L4) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt
#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End
#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT
#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT
#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt
#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End
#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT
#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT
#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt
#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End
#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT
#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT
#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt
#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End
#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT
#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT
#endif /* STM32L4 || STM32F4 || STM32F7 || STM32H7 */
/**
* @}
*/
......@@ -1221,6 +1495,13 @@
#endif
#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode
#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode
#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode
#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode
#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */
/**
* @}
*/
......@@ -1250,16 +1531,18 @@
#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7)
#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)
#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT
#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT
#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT
#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT
#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */
#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)
#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA
#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA
#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA
#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA
#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 */
#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */
#if defined(STM32F4)
#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT
......@@ -1278,6 +1561,13 @@
/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
* @{
*/
#if defined(STM32G0)
#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD
#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD
#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD
#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler
#endif
#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
......@@ -1350,14 +1640,14 @@
#define HAL_TIM_DMAError TIM_DMAError
#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
#if defined(STM32H7) || defined(STM32G0) || defined(STM32F7) || defined(STM32F4) || defined(STM32L0)
#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4)
#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro
#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT
#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback
#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent
#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT
#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA
#endif /* STM32H7 || STM32G0 || STM32F7 || STM32F4 || STM32L0 */
#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */
/**
* @}
*/
......@@ -2476,12 +2766,28 @@
#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
#if defined(STM32H7)
#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE
#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE
#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE
#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE
#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/
#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/
#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED
#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED
#endif
#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
......@@ -2814,6 +3120,15 @@
#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
#if defined(STM32L1)
#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
#endif /* STM32L1 */
#if defined(STM32F4)
#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
......@@ -2930,7 +3245,7 @@
#if defined(STM32L4)
#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE
#elif defined(STM32WB) || defined(STM32G0)
#elif defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5)
#else
#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
#endif
......@@ -3058,7 +3373,7 @@
/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
* @{
*/
#if defined (STM32G0) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx)
#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4)
#else
#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
#endif
......@@ -3174,14 +3489,14 @@
#define SDIO_IRQHandler SDMMC1_IRQHandler
#endif
#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2)
#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7)
#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef
#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef
#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef
#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef
#endif
#if defined(STM32H7)
#if defined(STM32H7) || defined(STM32L5)
#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback
#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback
#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback
......@@ -3421,7 +3736,7 @@
/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose
* @{
*/
#if defined (STM32H7) || defined (STM32F3)
#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3)
#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT
#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA
#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart
......@@ -3433,6 +3748,16 @@
* @}
*/
/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose
* @{
*/
#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7)
#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE
#endif /* STM32L4 || STM32F4 || STM32F7 */
/**
* @}
*/
/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
* @{
*/
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h
......@@ -18,8 +18,8 @@
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_EXTI_H
#define __STM32F7xx_HAL_EXTI_H
#ifndef STM32F7xx_HAL_EXTI_H
#define STM32F7xx_HAL_EXTI_H
#ifdef __cplusplus
extern "C" {
......@@ -38,14 +38,13 @@ extern "C" {
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup EXTI_Exported_Types EXTI Exported Types
* @{
*/
typedef enum
{
HAL_EXTI_COMMON_CB_ID = 0x00U,
HAL_EXTI_RISING_CB_ID = 0x01U,
HAL_EXTI_FALLING_CB_ID = 0x02U,
HAL_EXTI_COMMON_CB_ID = 0x00U
} EXTI_CallbackIDTypeDef;
/**
......@@ -68,6 +67,9 @@ typedef struct
This parameter can be a combination of @ref EXTI_Mode */
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
can be a value of @ref EXTI_Trigger */
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
This parameter is only possible for line 0 to 15. It
can be a value of @ref EXTI_GPIOSel */
} EXTI_ConfigTypeDef;
/**
......@@ -82,48 +84,36 @@ typedef struct
/** @defgroup EXTI_Line EXTI Line
* @{
*/
#define EXTI_LINE_0 EXTI_IMR_IM0 /*!< External interrupt line 0 */
#define EXTI_LINE_1 EXTI_IMR_IM1 /*!< External interrupt line 1 */
#define EXTI_LINE_2 EXTI_IMR_IM2 /*!< External interrupt line 2 */
#define EXTI_LINE_3 EXTI_IMR_IM3 /*!< External interrupt line 3 */
#define EXTI_LINE_4 EXTI_IMR_IM4 /*!< External interrupt line 4 */
#define EXTI_LINE_5 EXTI_IMR_IM5 /*!< External interrupt line 5 */
#define EXTI_LINE_6 EXTI_IMR_IM6 /*!< External interrupt line 6 */
#define EXTI_LINE_7 EXTI_IMR_IM7 /*!< External interrupt line 7 */
#define EXTI_LINE_8 EXTI_IMR_IM8 /*!< External interrupt line 8 */
#define EXTI_LINE_9 EXTI_IMR_IM9 /*!< External interrupt line 9 */
#define EXTI_LINE_10 EXTI_IMR_IM10 /*!< External interrupt line 10 */
#define EXTI_LINE_11 EXTI_IMR_IM11 /*!< External interrupt line 11 */
#define EXTI_LINE_12 EXTI_IMR_IM12 /*!< External interrupt line 12 */
#define EXTI_LINE_13 EXTI_IMR_IM13 /*!< External interrupt line 13 */
#define EXTI_LINE_14 EXTI_IMR_IM14 /*!< External interrupt line 14 */
#define EXTI_LINE_15 EXTI_IMR_IM15 /*!< External interrupt line 15 */
#if defined(EXTI_IMR_IM16)
#define EXTI_LINE_16 EXTI_IMR_IM16 /*!< External interrupt line 16 Connected to the PVD Output */
#endif /* EXTI_IMR_IM16 */
#if defined(EXTI_IMR_IM17)
#define EXTI_LINE_17 EXTI_IMR_IM17 /*!< External interrupt line 17 Connected to the RTC Alarm event */
#endif /* EXTI_IMR_IM17 */
#if defined(EXTI_IMR_IM18)
#define EXTI_LINE_18 EXTI_IMR_IM18 /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
#endif /* EXTI_IMR_IM18 */
#if defined(EXTI_IMR_IM19)
#define EXTI_LINE_19 EXTI_IMR_IM19 /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
#endif /* EXTI_IMR_IM19 */
#if defined(EXTI_IMR_IM20)
#define EXTI_LINE_20 EXTI_IMR_IM20 /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
#endif /* EXTI_IMR_IM20 */
#if defined(EXTI_IMR_IM21)
#define EXTI_LINE_21 EXTI_IMR_IM21 /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
#endif /* EXTI_IMR_IM21 */
#if defined(EXTI_IMR_IM22)
#define EXTI_LINE_22 EXTI_IMR_IM22 /*!< External interrupt line 22 Connected to the RTC Wakeup event */
#endif /* EXTI_IMR_IM22 */
#if defined(EXTI_IMR_IM23)
#define EXTI_LINE_23 EXTI_IMR_IM23 /*!< External interrupt line 23 Connected to the LPTIM Wakeup event */
#endif /* EXTI_IMR_IM23 */
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
#if defined(ETH)
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
#else
#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */
#endif /* ETH */
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM Wakeup event */
#if defined(EXTI_IMR_IM24)
#define EXTI_LINE_24 EXTI_IMR_IM24 /*!< External interrupt line 24 Connected to the MDIO Slave global Interrupt Wakeup event */
#define EXTI_LINE_24 (EXTI_CONFIG | 0x18u) /*!< External interrupt line 24 Connected to the MDIO Slave global Interrupt Wakeup event */
#endif /* EXTI_IMR_IM24 */
/**
* @}
......@@ -142,6 +132,7 @@ typedef struct
/** @defgroup EXTI_Trigger EXTI Trigger
* @{
*/
#define EXTI_TRIGGER_NONE 0x00000000u
#define EXTI_TRIGGER_RISING 0x00000001u
#define EXTI_TRIGGER_FALLING 0x00000002u
......@@ -150,6 +141,24 @@ typedef struct
* @}
*/
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
* @brief
* @{
*/
#define EXTI_GPIOA 0x00000000u
#define EXTI_GPIOB 0x00000001u
#define EXTI_GPIOC 0x00000002u
#define EXTI_GPIOD 0x00000003u
#define EXTI_GPIOE 0x00000004u
#define EXTI_GPIOF 0x00000005u
#define EXTI_GPIOG 0x00000006u
#define EXTI_GPIOH 0x00000007u
#define EXTI_GPIOI 0x00000008u
#define EXTI_GPIOJ 0x00000009u
#if defined (GPIOK)
#define EXTI_GPIOK 0x0000000Au
#endif /* GPIOK */
/**
* @}
*/
......@@ -168,6 +177,20 @@ typedef struct
* @{
*/
/**
* @brief EXTI Line property definition
*/
#define EXTI_PROPERTY_SHIFT 24u
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
/**
* @brief EXTI bit usage
*/
#define EXTI_PIN_MASK 0x0000001Fu
/**
* @brief EXTI Mask for interrupt & event mode
*/
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
......@@ -175,12 +198,17 @@ typedef struct
/**
* @brief EXTI Mask for trigger possibilities
*/
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING | EXTI_TRIGGER_RISING_FALLING)
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
/**
* @brief EXTI Line number
*/
#if defined(EXTI_IMR_IM24)
#define EXTI_LINE_NB 25u
#else
#define EXTI_LINE_NB 24u
#endif /* EXTI_IMR_IM24 */
/**
* @}
......@@ -190,16 +218,47 @@ typedef struct
/** @defgroup EXTI_Private_Macros EXTI Private Macros
* @{
*/
#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~EXTI_IMR_IM) == 0x00U) && (__LINE__))
#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
(((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
(((__LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & ~EXTI_MODE_MASK) == 0x00U))
#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \
(((__LINE__) & ~EXTI_MODE_MASK) == 0x00u))
#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00U)
#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
#define IS_EXTI_PENDING_EDGE(__LINE__) (((__LINE__) == EXTI_TRIGGER_FALLING) || \
((__LINE__) == EXTI_TRIGGER_RISING) || \
((__LINE__) == EXTI_TRIGGER_RISING_FALLING))
#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u)
#if defined (GPIOK)
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE) || \
((__PORT__) == EXTI_GPIOF) || \
((__PORT__) == EXTI_GPIOG) || \
((__PORT__) == EXTI_GPIOH) || \
((__PORT__) == EXTI_GPIOI) || \
((__PORT__) == EXTI_GPIOJ) || \
((__PORT__) == EXTI_GPIOK))
#else
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE) || \
((__PORT__) == EXTI_GPIOF) || \
((__PORT__) == EXTI_GPIOG) || \
((__PORT__) == EXTI_GPIOH) || \
((__PORT__) == EXTI_GPIOI) || \
((__PORT__) == EXTI_GPIOJ))
#endif /* GPIOK */
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U)
/**
* @}
......@@ -255,6 +314,6 @@ void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
}
#endif
#endif /* __STM32F7xx_HAL_EXTI_H */
#endif /* STM32F7xx_HAL_EXTI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h
......@@ -262,7 +262,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
* @{
*/
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != (uint32_t)0x00))
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U))
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h
......@@ -167,6 +167,9 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1))
#endif /* SYSCFG_PMC_I2C1_FMP && SYSCFG_PMC_I2C2_FMP && SYSCFG_PMC_I2C3_FMP && SYSCFG_PMC_I2C4_FMP */
/**
* @}
*/
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd.h
......@@ -148,9 +148,9 @@ typedef struct
/** @defgroup PCD_Speed PCD Speed
* @{
*/
#define PCD_SPEED_HIGH 0U
#define PCD_SPEED_HIGH_IN_FULL 1U
#define PCD_SPEED_FULL 2U
#define PCD_SPEED_HIGH USBD_HS_SPEED
#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED
#define PCD_SPEED_FULL USBD_FS_SPEED
/**
* @}
*/
......@@ -371,14 +371,6 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE 0x08U
#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE 0x0CU
#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U
#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE 0x08U
#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE 0x0CU
#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U
#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */
#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 20) /*!< USB HS EXTI Line WakeUp Interrupt */
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h
......@@ -167,7 +167,7 @@ typedef struct
This parameter can be a value of @ref TIM_Encoder_Mode */
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
uint32_t IC1Selection; /*!< Specifies the input.
This parameter can be a value of @ref TIM_Input_Capture_Selection */
......@@ -179,7 +179,7 @@ typedef struct
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
uint32_t IC2Selection; /*!< Specifies the input.
This parameter can be a value of @ref TIM_Input_Capture_Selection */
......@@ -235,7 +235,12 @@ typedef struct
uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */
uint32_t MasterSlaveMode; /*!< Master/slave mode selection
This parameter can be a value of @ref TIM_Master_Slave_Mode */
This parameter can be a value of @ref TIM_Master_Slave_Mode
@note When the Master/slave mode is enabled, the effect of
an event on the trigger input (TRGI) is delayed to allow a
perfect synchronization between the current timer and its
slaves (through TRGO). It is not mandatory in case of timer
synchronization mode. */
} TIM_MasterConfigTypeDef;
/**
......@@ -518,6 +523,15 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to
* @}
*/
/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap
* @{
*/
#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */
#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */
/**
* @}
*/
/** @defgroup TIM_ClockDivision TIM Clock Division
* @{
*/
......@@ -611,6 +625,15 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to
* @}
*/
/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity
* @{
*/
#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */
#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */
/**
* @}
*/
/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
* @{
*/
......@@ -1279,7 +1302,8 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to
* @arg TIM_IT_BREAK: Break interrupt
* @retval The state of TIM_IT (SET or RESET).
*/
#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \
== (__INTERRUPT__)) ? SET : RESET)
/** @brief Clear the TIM interrupt pending bits.
* @param __HANDLE__ TIM handle
......@@ -1298,6 +1322,31 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to
#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
/**
* @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31).
* @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way.
* @param __HANDLE__ TIM handle.
* @retval None
mode.
*/
#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP))
/**
* @brief Disable update interrupt flag (UIF) remapping.
* @param __HANDLE__ TIM handle.
* @retval None
mode.
*/
#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP))
/**
* @brief Get update interrupt flag (UIF) copy status.
* @param __COUNTER__ Counter value.
* @retval The state of UIFCPY (TRUE or FALSE).
mode.
*/
#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY))
/**
* @brief Indicates whether or not the TIM Counter is used as downcounter.
* @param __HANDLE__ TIM handle.
* @retval False (Counter used as upcounter) or True (Counter used as downcounter)
......@@ -1316,6 +1365,8 @@ mode.
/**
* @brief Set the TIM Counter Register value on runtime.
* Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in case of 32 bits counter TIM instance.
* Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros.
* @param __HANDLE__ TIM handle.
* @param __COUNTER__ specifies the Counter register new value.
* @retval None
......@@ -1327,8 +1378,7 @@ mode.
* @param __HANDLE__ TIM handle.
* @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
*/
#define __HAL_TIM_GET_COUNTER(__HANDLE__) \
((__HANDLE__)->Instance->CNT)
#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
/**
* @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function.
......@@ -1347,8 +1397,7 @@ mode.
* @param __HANDLE__ TIM handle.
* @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
*/
#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) \
((__HANDLE__)->Instance->ARR)
#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
/**
* @brief Set the TIM Clock Division value on runtime without calling another time any Init function.
......@@ -1375,8 +1424,7 @@ mode.
* @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
* @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
*/
#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) \
((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
/**
* @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
......@@ -1437,7 +1485,7 @@ mode.
* @retval None
*/
#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
......@@ -1458,7 +1506,7 @@ mode.
* @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)
*/
#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
......@@ -1500,12 +1548,62 @@ mode.
* @retval None
*/
#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\
((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE))
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\
((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE))
/**
* @brief Enable fast mode for a given channel.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @arg TIM_CHANNEL_5: TIM Channel 5 selected
* @arg TIM_CHANNEL_6: TIM Channel 6 selected
* @note When fast mode is enabled an active edge on the trigger input acts
* like a compare match on CCx output. Delay to sample the trigger
* input and to activate CCx output is reduced to 3 clock cycles.
* @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode.
* @retval None
*/
#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\
((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE))
/**
* @brief Disable fast mode for a given channel.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @arg TIM_CHANNEL_5: TIM Channel 5 selected
* @arg TIM_CHANNEL_6: TIM Channel 6 selected
* @note When fast mode is disabled CCx output behaves normally depending
* on counter and CCRx values even when the trigger is ON. The minimum
* delay to activate CCx output when an active edge occurs on the
* trigger input is 5 clock cycles.
* @retval None
*/
#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\
((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE))
/**
* @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register.
......@@ -1515,8 +1613,7 @@ mode.
* enabled)
* @retval None
*/
#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
((__HANDLE__)->Instance->CR1|= TIM_CR1_URS)
#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS)
/**
* @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register.
......@@ -1529,8 +1626,7 @@ mode.
* _ Update generation through the slave mode controller
* @retval None
*/
#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)
#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)
/**
* @brief Set the TIM Capture x input polarity on runtime.
......@@ -1636,6 +1732,9 @@ mode.
((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \
((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \
((__MODE__) == TIM_UIFREMAP_ENALE))
#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
((__DIV__) == TIM_CLOCKDIVISION_DIV4))
......@@ -1658,6 +1757,9 @@ mode.
#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
((__STATE__) == TIM_OCNIDLESTATE_RESET))
#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \
((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING))
#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \
((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \
((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
......@@ -1876,28 +1978,28 @@ mode.
((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U))))
#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
/**
* @}
......@@ -2035,7 +2137,8 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel
HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
uint32_t *pData2, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
......@@ -2059,17 +2162,19 @@ void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, uint32_t OutputChannel, uint32_t InputChannel);
HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
uint32_t OutputChannel, uint32_t InputChannel);
HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig,
uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig);
HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
......@@ -2095,7 +2200,8 @@ void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
pTIM_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
......@@ -2125,8 +2231,8 @@ HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
/* Private functions----------------------------------------------------------*/
/** @defgroup TIM_Private_Functions TIM Private Functions
* @{
*/
* @{
*/
void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
......@@ -2145,8 +2251,8 @@ void TIM_ResetCallback(TIM_HandleTypeDef *htim);
#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
/**
* @}
*/
* @}
*/
/* End of private functions --------------------------------------------------*/
/**
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h
......@@ -284,13 +284,19 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t
* @{
*/
/* Extended Control functions ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef *sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
TIM_MasterConfigTypeDef *sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
#if defined(TIM_BREAK_INPUT_SUPPORT)
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
#endif /* TIM_BREAK_INPUT_SUPPORT */
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
......@@ -327,7 +333,7 @@ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
/* End of exported functions -------------------------------------------------*/
/* Private functions----------------------------------------------------------*/
/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
* @{
*/
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h
......@@ -42,13 +42,6 @@ extern "C" {
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup USART_LL_Private_Constants USART Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup USART_LL_Private_Macros USART Private Macros
......@@ -162,12 +155,15 @@ typedef struct
#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */
#if defined(USART_TCBGT_SUPPORT)
#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time flag */
#endif
#endif /* USART_TCBGT_SUPPORT */
#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection flag */
#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */
#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout flag */
#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block flag */
#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */
#if defined(USART_CR1_UESM)
#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode flag */
#endif /* USART_CR1_UESM */
/**
* @}
*/
......@@ -195,10 +191,16 @@ typedef struct
#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */
#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */
#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */
#if defined(USART_CR1_UESM)
#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */
#endif /* USART_CR1_UESM */
#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */
#if defined(USART_ISR_REACK)
#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */
#endif /* USART_ISR_REACK */
#if defined(USART_TCBGT_SUPPORT)
#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */
#endif
#endif /* USART_TCBGT_SUPPORT */
/**
* @}
*/
......@@ -218,9 +220,12 @@ typedef struct
#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */
#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */
#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */
#if defined(USART_CR1_UESM)
#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */
#endif /* USART_CR1_UESM */
#if defined(USART_TCBGT_SUPPORT)
#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */
#endif
#endif /* USART_TCBGT_SUPPORT */
/**
* @}
*/
......@@ -400,6 +405,18 @@ typedef struct
* @}
*/
#if defined(USART_CR1_UESM)
/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation
* @{
*/
#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */
#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */
#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */
/**
* @}
*/
#endif /* USART_CR1_UESM */
/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power
* @{
*/
......@@ -480,7 +497,8 @@ typedef struct
* @param __BAUDRATE__ Baud rate value to achieve
* @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case
*/
#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__PERIPHCLK__)*2U) + ((__BAUDRATE__)/2U))/(__BAUDRATE__))
#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__PERIPHCLK__)*2U)\
+ ((__BAUDRATE__)/2U))/(__BAUDRATE__))
/**
* @brief Compute USARTDIV value according to Peripheral Clock and
......@@ -545,6 +563,87 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx)
return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL);
}
#if defined(USART_CR1_UESM)
/**
* @brief USART enabled in STOP Mode.
* @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that
* USART clock selection is HSI or LSE in RCC.
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR1 UESM LL_USART_EnableInStopMode
* @param USARTx USART Instance
* @retval None
*/
__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx)
{
SET_BIT(USARTx->CR1, USART_CR1_UESM);
}
/**
* @brief USART disabled in STOP Mode.
* @note When this function is disabled, USART is not able to wake up the MCU from Stop mode
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR1 UESM LL_USART_DisableInStopMode
* @param USARTx USART Instance
* @retval None
*/
__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx)
{
CLEAR_BIT(USARTx->CR1, USART_CR1_UESM);
}
/**
* @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not)
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode
* @param USARTx USART Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(USART_TypeDef *USARTx)
{
return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL);
}
#if defined(USART_CR3_UCESM)
/**
* @brief USART Clock enabled in STOP Mode
* @note When this function is called, USART Clock is enabled while in STOP mode
* @rmtoll CR3 UCESM LL_USART_EnableClockInStopMode
* @param USARTx USART Instance
* @retval None
*/
__STATIC_INLINE void LL_USART_EnableClockInStopMode(USART_TypeDef *USARTx)
{
SET_BIT(USARTx->CR3, USART_CR3_UCESM);
}
/**
* @brief USART clock disabled in STOP Mode
* @note When this function is called, USART Clock is disabled while in STOP mode
* @rmtoll CR3 UCESM LL_USART_DisableClockInStopMode
* @param USARTx USART Instance
* @retval None
*/
__STATIC_INLINE void LL_USART_DisableClockInStopMode(USART_TypeDef *USARTx)
{
CLEAR_BIT(USARTx->CR3, USART_CR3_UCESM);
}
/**
* @brief Indicate if USART clock is enabled in STOP Mode
* @rmtoll CR3 UCESM LL_USART_IsClockEnabledInStopMode
* @param USARTx USART Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_USART_IsClockEnabledInStopMode(USART_TypeDef *USARTx)
{
return (READ_BIT(USARTx->CR3, USART_CR3_UCESM) == (USART_CR3_UCESM));
}
#endif /* USART_CR3_UCESM */
#endif /* USART_CR1_UESM*/
/**
* @brief Receiver Enable (Receiver is enabled and begins searching for a start bit)
* @rmtoll CR1 RE LL_USART_EnableDirectionRx
......@@ -1461,6 +1560,41 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(USART_TypeDef *USARTx)
return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL);
}
#if defined(USART_CR1_UESM)
/**
* @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits)
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR3 WUS LL_USART_SetWKUPType
* @param USARTx USART Instance
* @param Type This parameter can be one of the following values:
* @arg @ref LL_USART_WAKEUP_ON_ADDRESS
* @arg @ref LL_USART_WAKEUP_ON_STARTBIT
* @arg @ref LL_USART_WAKEUP_ON_RXNE
* @retval None
*/
__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type)
{
MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type);
}
/**
* @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits)
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR3 WUS LL_USART_GetWKUPType
* @param USARTx USART Instance
* @retval Returned value can be one of the following values:
* @arg @ref LL_USART_WAKEUP_ON_ADDRESS
* @arg @ref LL_USART_WAKEUP_ON_STARTBIT
* @arg @ref LL_USART_WAKEUP_ON_RXNE
*/
__STATIC_INLINE uint32_t LL_USART_GetWKUPType(USART_TypeDef *USARTx)
{
return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS));
}
#endif /* USART_CR1_UESM */
/**
* @brief Configure USART BRR register for achieving expected Baud Rate value.
* @note Compute and set USARTDIV value in BRR Register (full BRR content)
......@@ -1480,7 +1614,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(USART_TypeDef *USARTx)
__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling,
uint32_t BaudRate)
{
register uint32_t usartdiv;
uint32_t usartdiv;
register uint32_t brrtemp;
if (OverSampling == LL_USART_OVERSAMPLING_8)
......@@ -2161,7 +2295,8 @@ __STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx)
{
/* In Asynchronous mode, the following bits must be kept cleared:
- LINEN, CLKEN bits in the USART_CR2 register,
- SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
- SCEN, IREN and HDSEL bits in the USART_CR3 register.
*/
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
}
......@@ -2197,7 +2332,8 @@ __STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx)
{
/* In Synchronous mode, the following bits must be kept cleared:
- LINEN bit in the USART_CR2 register,
- SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
- SCEN, IREN and HDSEL bits in the USART_CR3 register.
*/
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
/* set the UART/USART in Synchronous mode */
......@@ -2237,7 +2373,8 @@ __STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx)
{
/* In LIN mode, the following bits must be kept cleared:
- STOP and CLKEN bits in the USART_CR2 register,
- IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
- IREN, SCEN and HDSEL bits in the USART_CR3 register.
*/
CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP));
CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL));
/* Set the UART/USART in LIN mode */
......@@ -2275,7 +2412,8 @@ __STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx)
{
/* In Half Duplex mode, the following bits must be kept cleared:
- LINEN and CLKEN bits in the USART_CR2 register,
- SCEN and IREN bits in the USART_CR3 register.*/
- SCEN and IREN bits in the USART_CR3 register.
*/
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN));
/* set the UART/USART in Half Duplex mode */
......@@ -2315,7 +2453,8 @@ __STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx)
{
/* In Smartcard mode, the following bits must be kept cleared:
- LINEN bit in the USART_CR2 register,
- IREN and HDSEL bits in the USART_CR3 register.*/
- IREN and HDSEL bits in the USART_CR3 register.
*/
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
/* Configure Stop bits to 1.5 bits */
......@@ -2358,7 +2497,8 @@ __STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx)
{
/* In IRDA mode, the following bits must be kept cleared:
- LINEN, STOP and CLKEN bits in the USART_CR2 register,
- SCEN and HDSEL bits in the USART_CR3 register.*/
- SCEN and HDSEL bits in the USART_CR3 register.
*/
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
/* set the UART/USART in IRDA mode */
......@@ -2396,7 +2536,8 @@ __STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx)
{
/* In Multi Processor mode, the following bits must be kept cleared:
- LINEN and CLKEN bits in the USART_CR2 register,
- IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
- IREN, SCEN and HDSEL bits in the USART_CR3 register.
*/
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
}
......@@ -2630,6 +2771,21 @@ __STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx)
return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL);
}
#if defined(USART_CR1_UESM)
/**
* @brief Check if the USART Wake Up from stop mode Flag is set or not
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP
* @param USARTx USART Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(USART_TypeDef *USARTx)
{
return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL);
}
#endif /* USART_CR1_UESM */
/**
* @brief Check if the USART Transmit Enable Acknowledge Flag is set or not
* @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK
......@@ -2641,6 +2797,19 @@ __STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(USART_TypeDef *USARTx)
return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL);
}
#if defined(USART_ISR_REACK)
/**
* @brief Check if the USART Receive Enable Acknowledge Flag is set or not
* @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK
* @param USARTx USART Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(USART_TypeDef *USARTx)
{
return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL);
}
#endif/* USART_ISR_REACK */
#if defined(USART_TCBGT_SUPPORT)
/* Function available only on devices supporting Transmit Complete before Guard Time feature */
/**
......@@ -2653,8 +2822,8 @@ __STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(USART_TypeDef *USARTx)
{
return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL);
}
#endif
#endif /* USART_TCBGT_SUPPORT */
/**
* @brief Clear Parity Error Flag
* @rmtoll ICR PECF LL_USART_ClearFlag_PE
......@@ -2733,7 +2902,7 @@ __STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx)
{
WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF);
}
#endif
#endif /* USART_TCBGT_SUPPORT */
/**
* @brief Clear LIN Break Detection Flag
......@@ -2796,6 +2965,21 @@ __STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx)
WRITE_REG(USARTx->ICR, USART_ICR_CMCF);
}
#if defined(USART_CR1_UESM)
/**
* @brief Clear Wake Up from stop mode Flag
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP
* @param USARTx USART Instance
* @retval None
*/
__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx)
{
WRITE_REG(USARTx->ICR, USART_ICR_WUCF);
}
#endif /* USART_CR1_UESM */
/**
* @}
*/
......@@ -2935,6 +3119,21 @@ __STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx)
SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
}
#if defined(USART_CR1_UESM)
/**
* @brief Enable Wake Up from Stop Mode Interrupt
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP
* @param USARTx USART Instance
* @retval None
*/
__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx)
{
SET_BIT(USARTx->CR3, USART_CR3_WUFIE);
}
#endif /* USART_CR1_UESM */
#if defined(USART_TCBGT_SUPPORT)
/* Function available only on devices supporting Transmit Complete before Guard Time feature */
/**
......@@ -2949,7 +3148,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx)
{
SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
}
#endif
#endif /* USART_TCBGT_SUPPORT */
/**
* @brief Disable IDLE Interrupt
......@@ -3082,6 +3281,21 @@ __STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx)
CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
}
#if defined(USART_CR1_UESM)
/**
* @brief Disable Wake Up from Stop Mode Interrupt
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP
* @param USARTx USART Instance
* @retval None
*/
__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx)
{
CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE);
}
#endif /* USART_CR1_UESM */
#if defined(USART_TCBGT_SUPPORT)
/* Function available only on devices supporting Transmit Complete before Guard Time feature */
/**
......@@ -3096,7 +3310,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx)
{
CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
}
#endif
#endif /* USART_TCBGT_SUPPORT */
/**
* @brief Check if the USART IDLE Interrupt source is enabled or disabled.
......@@ -3225,6 +3439,21 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx)
return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL);
}
#if defined(USART_CR1_UESM)
/**
* @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled.
* @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
* Wake-up from Stop mode feature is supported by the USARTx instance.
* @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP
* @param USARTx USART Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(USART_TypeDef *USARTx)
{
return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL);
}
#endif /* USART_CR1_UESM */
#if defined(USART_TCBGT_SUPPORT)
/* Function available only on devices supporting Transmit Complete before Guard Time feature */
/**
......@@ -3239,7 +3468,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(USART_TypeDef *USARTx)
{
return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL);
}
#endif
#endif /* USART_TCBGT_SUPPORT */
/**
* @}
......@@ -3365,12 +3594,12 @@ __STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx, uint32_t
if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT)
{
/* return address of TDR register */
data_reg_addr = (uint32_t) & (USARTx->TDR);
data_reg_addr = (uint32_t) &(USARTx->TDR);
}
else
{
/* return address of RDR register */
data_reg_addr = (uint32_t) & (USARTx->RDR);
data_reg_addr = (uint32_t) &(USARTx->RDR);
}
return data_reg_addr;
......@@ -3392,7 +3621,7 @@ __STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx, uint32_t
*/
__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx)
{
return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR));
return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU);
}
/**
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h
......@@ -155,7 +155,7 @@ typedef struct
typedef struct
{
uint8_t dev_addr ; /*!< USB device address.
uint8_t dev_addr; /*!< USB device address.
This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
uint8_t ch_num; /*!< Host channel number.
......@@ -234,6 +234,18 @@ typedef struct
* @}
*/
/** @defgroup USB_LL Device Speed
* @{
*/
#define USBD_HS_SPEED 0U
#define USBD_HSINFS_SPEED 1U
#define USBH_HS_SPEED 0U
#define USBD_FS_SPEED 2U
#define USBH_FSLS_SPEED 1U
/**
* @}
*/
/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
* @{
*/
......@@ -287,7 +299,6 @@ typedef struct
*/
#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1)
#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1)
#define DSTS_ENUMSPD_LS_PHY_6MHZ (2U << 1)
#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1)
/**
* @}
......@@ -462,13 +473,9 @@ HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state);
uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx);
uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
uint8_t ch_num,
uint8_t epnum,
uint8_t dev_address,
uint8_t speed,
uint8_t ep_type,
uint16_t mps);
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num,
uint8_t epnum, uint8_t dev_address, uint8_t speed,
uint8_t ep_type, uint16_t mps);
HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num);
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
......@@ -50,11 +50,11 @@
* @{
*/
/**
* @brief STM32F7xx HAL Driver version number V1.2.7
* @brief STM32F7xx HAL Driver version number V1.2.8
*/
#define __STM32F7xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __STM32F7xx_HAL_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
#define __STM32F7xx_HAL_VERSION_SUB2 (0x07) /*!< [15:8] sub2 version */
#define __STM32F7xx_HAL_VERSION_SUB2 (0x08) /*!< [15:8] sub2 version */
#define __STM32F7xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32F7xx_HAL_VERSION ((__STM32F7xx_HAL_VERSION_MAIN << 24)\
|(__STM32F7xx_HAL_VERSION_SUB1 << 16)\
......@@ -319,14 +319,26 @@ uint32_t HAL_GetTickPrio(void)
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
{
HAL_StatusTypeDef status = HAL_OK;
HAL_TickFreqTypeDef prevTickFreq;
assert_param(IS_TICKFREQ(Freq));
if (uwTickFreq != Freq)
{
/* Back up uwTickFreq frequency */
prevTickFreq = uwTickFreq;
/* Update uwTickFreq global variable used by HAL_InitTick() */
uwTickFreq = Freq;
/* Apply the new tick Freq */
status = HAL_InitTick(uwTickPrio);
if (status != HAL_OK)
{
/* Restore previous tick frequency */
uwTickFreq = prevTickFreq;
}
}
return status;
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c
......@@ -85,7 +85,6 @@
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"
#include "stm32f7xx_hal_exti.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
......@@ -105,7 +104,7 @@
#ifdef HAL_EXTI_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private defines ------------------------------------------------------------*/
/* Private defines -----------------------------------------------------------*/
/** @defgroup EXTI_Private_Constants EXTI Private Constants
* @{
*/
......@@ -144,6 +143,8 @@
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
{
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
/* Check null pointer */
if ((hexti == NULL) || (pExtiConfig == NULL))
......@@ -154,37 +155,77 @@ HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT
/* Check parameters */
assert_param(IS_EXTI_LINE(pExtiConfig->Line));
assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
/* Assign line number to handle */
hexti->Line = pExtiConfig->Line;
/* Clear EXTI line configuration */
EXTI->IMR &= ~pExtiConfig->Line;
EXTI->EMR &= ~pExtiConfig->Line;
/* Compute line mask */
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
/* Select the Mode for the selected external interrupts */
regval = (uint32_t)EXTI_BASE;
regval += pExtiConfig->Mode;
*(__IO uint32_t *) regval |= pExtiConfig->Line;
/* Configure triggers for configurable lines */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
{
assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
/* Clear Rising Falling edge configuration */
EXTI->RTSR &= ~pExtiConfig->Line;
EXTI->FTSR &= ~pExtiConfig->Line;
/* Configure rising trigger */
/* Mask or set line */
if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u)
{
EXTI->RTSR |= maskline;
}
else
{
EXTI->RTSR &= ~maskline;
}
/* Select the trigger for the selected external interrupts */
if (pExtiConfig->Trigger == EXTI_TRIGGER_RISING_FALLING)
/* Configure falling trigger */
/* Mask or set line */
if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u)
{
/* Rising Falling edge */
EXTI->RTSR |= pExtiConfig->Line;
EXTI->FTSR |= pExtiConfig->Line;
EXTI->FTSR |= maskline;
}
else
{
regval = (uint32_t)EXTI_BASE;
regval += pExtiConfig->Trigger;
*(__IO uint32_t *) regval |= pExtiConfig->Line;
EXTI->FTSR &= ~maskline;
}
/* Configure gpio port selection in case of gpio exti line */
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = SYSCFG->EXTICR[linepos >> 2u];
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
SYSCFG->EXTICR[linepos >> 2u] = regval;
}
}
/* Configure interrupt mode : read current mode */
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u)
{
EXTI->IMR |= maskline;
}
else
{
EXTI->IMR &= ~maskline;
}
/* Configure event mode : read current mode */
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u)
{
EXTI->EMR |= maskline;
}
else
{
EXTI->EMR &= ~maskline;
}
return HAL_OK;
}
......@@ -196,6 +237,10 @@ HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT
*/
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
{
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
/* Check null pointer */
if ((hexti == NULL) || (pExtiConfig == NULL))
{
......@@ -208,41 +253,67 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT
/* Store handle line number to configuration structure */
pExtiConfig->Line = hexti->Line;
/* Get EXTI mode to configiguration structure */
if ((EXTI->IMR & hexti->Line) == hexti->Line)
/* Compute line mask */
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
/* 1] Get core mode : interrupt */
/* Check if selected line is enable */
if ((EXTI->IMR & maskline) != 0x00u)
{
pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
}
else if ((EXTI->EMR & hexti->Line) == hexti->Line)
else
{
pExtiConfig->Mode = EXTI_MODE_EVENT;
pExtiConfig->Mode = EXTI_MODE_NONE;
}
else
/* Get event mode */
/* Check if selected line is enable */
if ((EXTI->EMR & maskline) != 0x00u)
{
/* No MODE selected */
pExtiConfig->Mode = 0x0Bu;
pExtiConfig->Mode |= EXTI_MODE_EVENT;
}
/* Get EXTI Trigger to configiguration structure */
if ((EXTI->RTSR & hexti->Line) == hexti->Line)
/* 2] Get trigger for configurable lines : rising */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
{
if ((EXTI->FTSR & hexti->Line) == hexti->Line)
/* Check if configuration of selected line is enable */
if ((EXTI->RTSR & maskline) != 0x00u)
{
pExtiConfig->Trigger = EXTI_TRIGGER_RISING_FALLING;
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
}
else
{
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
}
/* Get falling configuration */
/* Check if configuration of selected line is enable */
if ((EXTI->FTSR & maskline) != 0x00u)
{
pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
}
else if ((EXTI->FTSR & hexti->Line) == hexti->Line)
/* Get Gpio port selection for gpio lines */
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
{
pExtiConfig->Trigger = EXTI_TRIGGER_FALLING;
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = SYSCFG->EXTICR[linepos >> 2u];
pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
}
else
{
pExtiConfig->GPIOSel = 0x00u;
}
}
else
{
/* No Trigger selected */
pExtiConfig->Trigger = 0x00u;
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
pExtiConfig->GPIOSel = 0x00u;
}
return HAL_OK;
......@@ -255,6 +326,10 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT
*/
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
{
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
/* Check null pointer */
if (hexti == NULL)
{
......@@ -264,15 +339,32 @@ HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
/* Check the parameter */
assert_param(IS_EXTI_LINE(hexti->Line));
/* compute line mask */
linepos = (hexti->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
/* 1] Clear interrupt mode */
EXTI->IMR = (EXTI->IMR & ~hexti->Line);
EXTI->IMR = (EXTI->IMR & ~maskline);
/* 2] Clear event mode */
EXTI->EMR = (EXTI->EMR & ~hexti->Line);
EXTI->EMR = (EXTI->EMR & ~maskline);
/* 3] Clear triggers in case of configurable lines */
if ((hexti->Line & EXTI_CONFIG) != 0x00u)
{
EXTI->RTSR = (EXTI->RTSR & ~maskline);
EXTI->FTSR = (EXTI->FTSR & ~maskline);
/* Get Gpio port selection for gpio lines */
if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PIN(linepos));
/* 3] Clear triggers */
EXTI->RTSR = (EXTI->RTSR & ~hexti->Line);
EXTI->FTSR = (EXTI->FTSR & ~hexti->Line);
regval = SYSCFG->EXTICR[linepos >> 2u];
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
SYSCFG->EXTICR[linepos >> 2u] = regval;
}
}
return HAL_OK;
}
......@@ -352,17 +444,18 @@ HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLin
*/
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t maskline;
/* Get pending bit */
regaddr = (&EXTI->PR);
regval = (*regaddr & hexti->Line);
/* Compute line mask */
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
/* Get pending bit */
regval = (EXTI->PR & maskline);
if (regval != 0x00u)
{
/* Clear pending bit */
*regaddr = hexti->Line;
EXTI->PR = maskline;
/* Call callback */
if (hexti->PendingCallback != NULL)
......@@ -383,19 +476,21 @@ void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
*/
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
assert_param(IS_EXTI_PENDING_EDGE(Edge));
/* Get pending bit */
regaddr = &EXTI->PR;
/* Compute line mask */
linepos = (hexti->Line & EXTI_PIN_MASK);
maskline = (1uL << linepos);
/* return 1 if bit is set else 0 */
regval = ((*regaddr & hexti->Line) >> POSITION_VAL(hexti->Line));
regval = ((EXTI->PR & maskline) >> linepos);
return regval;
}
......@@ -410,12 +505,18 @@ uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
*/
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
{
uint32_t maskline;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
assert_param(IS_EXTI_PENDING_EDGE(Edge));
/* Compute line mask */
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
/* Clear Pending bit */
EXTI->PR = hexti->Line;
EXTI->PR = maskline;
}
/**
......@@ -425,10 +526,17 @@ void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
*/
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
{
uint32_t maskline;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
/* Compute line mask */
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
EXTI->SWIER = hexti->Line;
/* Generate Software interrupt */
EXTI->SWIER = maskline;
}
/**
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c
......@@ -190,25 +190,6 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
if(iocurrent == ioposition)
{
/*--------------------- GPIO Mode Configuration ------------------------*/
/* In case of Alternate function mode selection */
if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Alternate function parameter */
assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
/* Configure Alternate function mapped with the current IO */
temp = GPIOx->AFR[position >> 3];
temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
GPIOx->AFR[position >> 3] = temp;
}
/* Configure IO Direction mode (Input, Output, Alternate or Analog) */
temp = GPIOx->MODER;
temp &= ~(GPIO_MODER_MODER0 << (position * 2));
temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
GPIOx->MODER = temp;
/* In case of Output or Alternate function mode selection */
if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
(GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
......@@ -234,6 +215,25 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
temp |= ((GPIO_Init->Pull) << (position * 2));
GPIOx->PUPDR = temp;
/* In case of Alternate function mode selection */
if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Alternate function parameter */
assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
/* Configure Alternate function mapped with the current IO */
temp = GPIOx->AFR[position >> 3];
temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
GPIOx->AFR[position >> 3] = temp;
}
/* Configure IO Direction mode (Input, Output, Alternate or Analog) */
temp = GPIOx->MODER;
temp &= ~(GPIO_MODER_MODER0 << (position * 2));
temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
GPIOx->MODER = temp;
/*--------------------- EXTI Mode Configuration ------------------------*/
/* Configure the External Interrupt or event for the current IO */
if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
......@@ -316,10 +316,6 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))))
{
/* Configure the External Interrupt or event for the current IO */
tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
SYSCFG->EXTICR[position >> 2] &= ~tmp;
/* Clear EXTI line configuration */
EXTI->IMR &= ~((uint32_t)iocurrent);
EXTI->EMR &= ~((uint32_t)iocurrent);
......@@ -327,6 +323,10 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
/* Clear Rising Falling edge configuration */
EXTI->RTSR &= ~((uint32_t)iocurrent);
EXTI->FTSR &= ~((uint32_t)iocurrent);
/* Configure the External Interrupt or event for the current IO */
tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
SYSCFG->EXTICR[position >> 2] &= ~tmp;
}
/*------------------------- GPIO Mode Configuration --------------------*/
/* Configure IO Direction in Input Floating Mode */
......@@ -335,14 +335,14 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
/* Configure the default Alternate Function in current IO */
GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
/* Configure the default value for IO Speed */
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
/* Deactivate the Pull-up and Pull-down resistor for the current IO */
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
/* Configure the default value IO Output Type */
GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
/* Deactivate the Pull-up and Pull-down resistor for the current IO */
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
/* Configure the default value for IO Speed */
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
}
}
}
......@@ -431,13 +431,13 @@ void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
if ((GPIOx->ODR & GPIO_Pin) == GPIO_Pin)
if ((GPIOx->ODR & GPIO_Pin) != 0X00u)
{
GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER;
}
else
{
GPIOx->BSRR = GPIO_Pin;
GPIOx->BSRR = (uint32_t)GPIO_Pin;
}
}
......@@ -467,9 +467,10 @@ HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
GPIOx->LCKR = GPIO_Pin;
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
GPIOx->LCKR = tmp;
/* Read LCKK bit*/
/* Read LCKR register. This read is mandatory to complete key lock sequence */
tmp = GPIOx->LCKR;
/* Read again in order to confirm lock is active */
if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
{
return HAL_OK;
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c
......@@ -223,12 +223,12 @@
*** Callback registration ***
=============================================
[..]
The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1
allows the user to configure dynamically the driver callbacks.
Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback()
to register an interrupt callback.
[..]
Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks:
(+) MasterTxCpltCallback : callback for Master transmission end of transfer.
(+) MasterRxCpltCallback : callback for Master reception end of transfer.
......@@ -243,9 +243,9 @@
(+) MspDeInitCallback : callback for Msp DeInit.
This function takes as parameters the HAL peripheral handle, the Callback ID
and a pointer to the user callback function.
[..]
For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback().
[..]
Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default
weak function.
@ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle,
......@@ -262,9 +262,9 @@
(+) AbortCpltCallback : callback for abort completion process.
(+) MspInitCallback : callback for Msp Init.
(+) MspDeInitCallback : callback for Msp DeInit.
[..]
For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback().
[..]
By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET
all callbacks are set to the corresponding weak functions:
examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback().
......@@ -273,7 +273,7 @@
these callbacks are null (not registered beforehand).
If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit()
keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
[..]
Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only.
Exception done MspInit/MspDeInit functions that can be registered/unregistered
in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state,
......@@ -281,7 +281,7 @@
Then, the user first registers the MspInit/MspDeInit user callbacks
using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit()
or @ref HAL_I2C_Init() function.
[..]
When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or
not defined, the callback registration feature is not available and all callbacks
are set to the corresponding weak functions.
......@@ -4737,6 +4737,13 @@ static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint
/* Process locked */
__HAL_LOCK(hi2c);
/* Check if STOPF is set */
if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Slave complete process */
I2C_ITSlaveCplt(hi2c, tmpITFlags);
}
if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
{
/* Check that I2C transfer finished */
......@@ -4788,9 +4795,6 @@ static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint
{
if (hi2c->XferCount > 0U)
{
/* Remove RXNE flag on temporary variable as read done */
tmpITFlags &= ~I2C_FLAG_RXNE;
/* Read data from RXDR */
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
......@@ -4844,13 +4848,6 @@ static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint
/* Nothing to do */
}
/* Check if STOPF is set */
if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Slave complete process */
I2C_ITSlaveCplt(hi2c, tmpITFlags);
}
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
......@@ -5008,6 +5005,13 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin
/* Process locked */
__HAL_LOCK(hi2c);
/* Check if STOPF is set */
if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Slave complete process */
I2C_ITSlaveCplt(hi2c, ITFlags);
}
if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
{
/* Check that I2C transfer finished */
......@@ -5092,11 +5096,6 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin
{
I2C_ITAddrCplt(hi2c, ITFlags);
}
else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Slave complete process */
I2C_ITSlaveCplt(hi2c, ITFlags);
}
else
{
/* Nothing to do */
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd.c
......@@ -122,6 +122,7 @@ static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint
*/
HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
{
USB_OTG_GlobalTypeDef *USBx;
uint8_t i;
/* Check the PCD handle allocation */
......@@ -133,6 +134,8 @@ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
/* Check the parameters */
assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
USBx = hpcd->Instance;
if (hpcd->State == HAL_PCD_STATE_RESET)
{
/* Allocate lock resource and initialize it */
......@@ -166,6 +169,12 @@ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
hpcd->State = HAL_PCD_STATE_BUSY;
/* Disable DMA mode for FS instance */
if ((USBx->CID & (0x1U << 8)) == 0U)
{
hpcd->Init.dma_enable = 0U;
}
/* Disable the Interrupts */
__HAL_PCD_DISABLE(hpcd);
......@@ -943,7 +952,7 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
{
USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t i, ep_intr, epint, epnum = 0U;
uint32_t i, ep_intr, epint, epnum;
uint32_t fifoemptymsk, temp;
USB_OTG_EPTypeDef *ep;
......@@ -962,6 +971,38 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
__HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
}
/* Handle RxQLevel Interrupt */
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
{
USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
temp = USBx->GRXSTSP;
ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT)
{
if ((temp & USB_OTG_GRXSTSP_BCNT) != 0U)
{
(void)USB_ReadPacket(USBx, ep->xfer_buff,
(uint16_t)((temp & USB_OTG_GRXSTSP_BCNT) >> 4));
ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
}
}
else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT)
{
(void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U);
ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
}
else
{
/* ... */
}
USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
}
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
{
epnum = 0U;
......@@ -983,9 +1024,9 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
{
CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
/* Class B setup phase done for previous decoded setup */
(void)PCD_EP_OutSetupPacket_int(hpcd, epnum);
CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
}
if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
......@@ -996,10 +1037,6 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
/* Clear Status Phase Received interrupt */
if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR)
{
if (hpcd->Init.dma_enable == 1U)
{
(void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
}
CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR);
}
......@@ -1037,16 +1074,7 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
if (hpcd->Init.dma_enable == 1U)
{
hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket;
}
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataInStageCallback(hpcd, (uint8_t)epnum);
#else
HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
if (hpcd->Init.dma_enable == 1U)
{
/* this is ZLP, so prepare EP0 for next setup */
if ((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U))
{
......@@ -1054,6 +1082,12 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
(void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
}
}
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataInStageCallback(hpcd, (uint8_t)epnum);
#else
HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
{
......@@ -1159,8 +1193,10 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
{
USBx_INEP(i)->DIEPINT = 0xFB7FU;
USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
USBx_INEP(i)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK;
USBx_OUTEP(i)->DOEPINT = 0xFB7FU;
USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK;
}
USBx_DEVICE->DAINTMSK |= 0x10001U;
......@@ -1201,15 +1237,7 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
{
(void)USB_ActivateSetup(hpcd->Instance);
if (USB_GetDevSpeed(hpcd->Instance) == USB_OTG_SPEED_HIGH)
{
hpcd->Init.speed = USB_OTG_SPEED_HIGH;
}
else
{
hpcd->Init.speed = USB_OTG_SPEED_FULL;
}
hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance);
/* Set USB Turnaround time */
(void)USB_SetTurnaroundTime(hpcd->Instance,
......@@ -1225,38 +1253,6 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
__HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
}
/* Handle RxQLevel Interrupt */
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
{
USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
temp = USBx->GRXSTSP;
ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT)
{
if ((temp & USB_OTG_GRXSTSP_BCNT) != 0U)
{
(void)USB_ReadPacket(USBx, ep->xfer_buff,
(uint16_t)((temp & USB_OTG_GRXSTSP_BCNT) >> 4));
ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
}
}
else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT)
{
(void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U);
ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
}
else
{
/* ... */
}
USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
}
/* Handle SOF Interrupt */
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
{
......@@ -1272,6 +1268,10 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
/* Handle Incomplete ISO IN Interrupt */
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
{
/* Keep application checking the corresponding Iso IN endpoint
causing the incomplete Interrupt */
epnum = 0U;
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum);
#else
......@@ -1284,6 +1284,10 @@ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
/* Handle Incomplete ISO OUT Interrupt */
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
{
/* Keep application checking the corresponding Iso OUT endpoint
causing the incomplete Interrupt */
epnum = 0U;
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum);
#else
......@@ -1963,16 +1967,6 @@ static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint
{
CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX);
}
/* Inform the upper layer that a setup packet is available */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->SetupStageCallback(hpcd);
#else
HAL_PCD_SetupStageCallback(hpcd);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
(void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
}
else if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) /* Class E */
{
......@@ -1995,17 +1989,16 @@ static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint
hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket;
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum);
#else
HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U))
{
/* this is ZLP, so prepare EP0 for next setup */
(void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
}
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum);
#else
HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
}
else
......@@ -2038,6 +2031,12 @@ static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint
}
else
{
if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U))
{
/* this is ZLP, so prepare EP0 for next setup */
(void)USB_EP0_OutStart(hpcd->Instance, 0U, (uint8_t *)hpcd->Setup);
}
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum);
#else
......@@ -2063,23 +2062,11 @@ static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint
uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U);
uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT;
if (hpcd->Init.dma_enable == 1U)
{
/* StupPktRcvd = 1 pending setup packet int */
if ((gSNPSiD > USB_OTG_CORE_ID_300A) &&
((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX))
{
CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX);
}
}
else
{
if ((gSNPSiD == USB_OTG_CORE_ID_310A) &&
((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX))
{
CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX);
}
}
/* Inform the upper layer that a setup packet is available */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
......@@ -317,7 +317,7 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void)
SystemCoreClock = HSI_VALUE;
/* Adapt Systick interrupt period */
if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK)
if (HAL_InitTick(uwTickPrio) != HAL_OK)
{
return HAL_ERROR;
}
......@@ -344,10 +344,11 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void)
HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
{
uint32_t tickstart;
uint32_t pll_config;
FlagStatus pwrclkchanged = RESET;
/* Check Null pointer */
if(RCC_OscInitStruct == NULL)
if (RCC_OscInitStruct == NULL)
{
return HAL_ERROR;
}
......@@ -356,15 +357,15 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
/*------------------------------- HSE Configuration ------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
{
/* Check the parameters */
assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
/* When the HSE is used as system clock or clock source for PLL, It can not be disabled */
if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
|| ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
{
if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
{
return HAL_ERROR;
}
......@@ -375,15 +376,15 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
__HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
/* Check the HSE State */
if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
{
/* Get Start Tick*/
tickstart = HAL_GetTick();
/* Wait till HSE is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -395,9 +396,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till HSE is bypassed or disabled */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -406,18 +407,18 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
}
/*----------------------------- HSI Configuration --------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
{
/* Check the parameters */
assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
/* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
|| ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
{
/* When HSI is used as system clock it will not disabled */
if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
{
return HAL_ERROR;
}
......@@ -431,7 +432,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
else
{
/* Check the HSI State */
if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
if ((RCC_OscInitStruct->HSIState) != RCC_HSI_OFF)
{
/* Enable the Internal High Speed oscillator (HSI). */
__HAL_RCC_HSI_ENABLE();
......@@ -440,9 +441,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till HSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -460,9 +461,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till HSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -471,13 +472,13 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
}
/*------------------------------ LSI Configuration -------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
{
/* Check the parameters */
assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
/* Check the LSI State */
if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
if ((RCC_OscInitStruct->LSIState) != RCC_LSI_OFF)
{
/* Enable the Internal Low Speed oscillator (LSI). */
__HAL_RCC_LSI_ENABLE();
......@@ -486,9 +487,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till LSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -503,9 +504,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till LSI is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -513,21 +514,21 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
}
/*------------------------------ LSE Configuration -------------------------*/
if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
{
/* Check the parameters */
assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
/* Update LSE configuration in Backup Domain control register */
/* Requires to enable write access to Backup Domain of necessary */
if(__HAL_RCC_PWR_IS_CLK_DISABLED())
if (__HAL_RCC_PWR_IS_CLK_DISABLED())
{
/* Enable Power Clock*/
__HAL_RCC_PWR_CLK_ENABLE();
pwrclkchanged = SET;
}
if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
{
/* Enable write access to Backup domain */
PWR->CR1 |= PWR_CR1_DBP;
......@@ -535,9 +536,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
/* Wait for Backup domain Write protection disable */
tickstart = HAL_GetTick();
while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
while (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
{
if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -547,15 +548,15 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
/* Set the new LSE configuration -----------------------------------------*/
__HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
/* Check the LSE State */
if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
if ((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
{
/* Get Start Tick*/
tickstart = HAL_GetTick();
/* Wait till LSE is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -567,9 +568,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till LSE is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -577,7 +578,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
/* Restore clock configuration if changed */
if(pwrclkchanged == SET)
if (pwrclkchanged == SET)
{
__HAL_RCC_PWR_CLK_DISABLE();
}
......@@ -588,9 +589,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
{
/* Check if the PLL is used as system clock or not */
if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
{
if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
{
/* Check the parameters */
assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
......@@ -609,9 +610,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till PLL is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -640,9 +641,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till PLL is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -657,9 +658,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
tickstart = HAL_GetTick();
/* Wait till PLL is ready */
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
{
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
{
return HAL_TIMEOUT;
}
......@@ -668,9 +669,29 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
else
{
/* Do not return HAL_ERROR if request repeats the current configuration */
pll_config = RCC->PLLCFGR;
#if defined (RCC_PLLCFGR_PLLR)
if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != ((((RCC_OscInitStruct->PLL.PLLP) >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos)) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos)))
#else
if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != ((((RCC_OscInitStruct->PLL.PLLP) >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos)) ||
(READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)))
#endif
{
return HAL_ERROR;
}
}
}
return HAL_OK;
}
......@@ -705,7 +726,7 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui
uint32_t tickstart = 0;
/* Check Null pointer */
if(RCC_ClkInitStruct == NULL)
if (RCC_ClkInitStruct == NULL)
{
return HAL_ERROR;
}
......@@ -719,30 +740,30 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui
(HCLK) and the supply voltage of the device. */
/* Increasing the CPU frequency */
if(FLatency > __HAL_FLASH_GET_LATENCY())
if (FLatency > __HAL_FLASH_GET_LATENCY())
{
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
__HAL_FLASH_SET_LATENCY(FLatency);
/* Check that the new number of wait states is taken into account to access the Flash
memory by reading the FLASH_ACR register */
if(__HAL_FLASH_GET_LATENCY() != FLatency)
if (__HAL_FLASH_GET_LATENCY() != FLatency)
{
return HAL_ERROR;
}
}
/*-------------------------- HCLK Configuration --------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
{
/* Set the highest APBx dividers in order to ensure that we do not go through
a non-spec phase whatever we decrease or increase HCLK. */
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16);
}
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3));
}
......@@ -753,24 +774,24 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui
}
/*------------------------- SYSCLK Configuration ---------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
{
assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
/* HSE is selected as System Clock Source */
if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
{
/* Check the HSE ready flag */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
{
return HAL_ERROR;
}
}
/* PLL is selected as System Clock Source */
else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
{
/* Check the PLL ready flag */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
if (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
{
return HAL_ERROR;
}
......@@ -779,7 +800,7 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui
else
{
/* Check the HSI ready flag */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
{
return HAL_ERROR;
}
......@@ -800,38 +821,38 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui
}
/* Decreasing the number of wait states because of lower CPU frequency */
if(FLatency < __HAL_FLASH_GET_LATENCY())
if (FLatency < __HAL_FLASH_GET_LATENCY())
{
/* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
__HAL_FLASH_SET_LATENCY(FLatency);
/* Check that the new number of wait states is taken into account to access the Flash
memory by reading the FLASH_ACR register */
if(__HAL_FLASH_GET_LATENCY() != FLatency)
if (__HAL_FLASH_GET_LATENCY() != FLatency)
{
return HAL_ERROR;
}
}
/*-------------------------- PCLK1 Configuration ---------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
{
assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
}
/*-------------------------- PCLK2 Configuration ---------------------------*/
if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
{
assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3));
}
/* Update the SystemCoreClock global variable */
SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos];
SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos];
/* Configure the source of time base considering new system clocks settings*/
HAL_InitTick (TICK_INT_PRIORITY);
HAL_InitTick(uwTickPrio);
return HAL_OK;
}
......@@ -888,7 +909,7 @@ void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_M
assert_param(IS_RCC_MCO(RCC_MCOx));
assert_param(IS_RCC_MCODIV(RCC_MCODiv));
/* RCC_MCO1 */
if(RCC_MCOx == RCC_MCO1)
if (RCC_MCOx == RCC_MCO1)
{
assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
......@@ -1005,16 +1026,16 @@ uint32_t HAL_RCC_GetSysClockFreq(void)
if (__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLCFGR_PLLSRC_HSI)
{
/* HSE used as PLL clock source */
pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
pllvco = (uint32_t)((((uint64_t) HSE_VALUE * ((uint64_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
}
else
{
/* HSI used as PLL clock source */
pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
pllvco = (uint32_t)((((uint64_t) HSI_VALUE * ((uint64_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
}
pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1 ) *2);
pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1) * 2);
sysclockfreq = pllvco/pllp;
sysclockfreq = pllvco / pllp;
break;
}
default:
......@@ -1047,7 +1068,7 @@ uint32_t HAL_RCC_GetHCLKFreq(void)
uint32_t HAL_RCC_GetPCLK1Freq(void)
{
/* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]);
return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos]);
}
/**
......@@ -1059,7 +1080,7 @@ uint32_t HAL_RCC_GetPCLK1Freq(void)
uint32_t HAL_RCC_GetPCLK2Freq(void)
{
/* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]);
return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos]);
}
/**
......@@ -1075,11 +1096,11 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
/* Get the HSE configuration -----------------------------------------------*/
if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
{
RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
}
else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON)
{
RCC_OscInitStruct->HSEState = RCC_HSE_ON;
}
......@@ -1089,7 +1110,7 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
/* Get the HSI configuration -----------------------------------------------*/
if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION)
{
RCC_OscInitStruct->HSIState = RCC_HSI_ON;
}
......@@ -1098,14 +1119,14 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
}
RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR & RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
/* Get the LSE configuration -----------------------------------------------*/
if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
{
RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
}
else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
{
RCC_OscInitStruct->LSEState = RCC_LSE_ON;
}
......@@ -1115,7 +1136,7 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
/* Get the LSI configuration -----------------------------------------------*/
if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION)
{
RCC_OscInitStruct->LSIState = RCC_LSI_ON;
}
......@@ -1125,7 +1146,7 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
}
/* Get the PLL configuration -----------------------------------------------*/
if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON)
{
RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
}
......@@ -1180,7 +1201,7 @@ void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pF
void HAL_RCC_NMI_IRQHandler(void)
{
/* Check RCC CSSF flag */
if(__HAL_RCC_GET_IT(RCC_IT_CSS))
if (__HAL_RCC_GET_IT(RCC_IT_CSS))
{
/* RCC Clock Security System interrupt user callback */
HAL_RCC_CSSCallback();
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c
......@@ -98,18 +98,22 @@
*** Callback registration ***
=============================================
[..]
The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1
allows the user to configure dynamically the driver callbacks.
[..]
Use Function @ref HAL_TIM_RegisterCallback() to register a callback.
@ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle,
the Callback ID and a pointer to the user callback function.
[..]
Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default
weak function.
@ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
and the Callback ID.
[..]
These functions allow to register/unregister following callbacks:
(+) Base_MspInitCallback : TIM Base Msp Init Callback.
(+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback.
......@@ -140,15 +144,18 @@
(+) BreakCallback : TIM Break Callback.
(+) Break2Callback : TIM Break2 Callback.
[..]
By default, after the Init and when the state is HAL_TIM_STATE_RESET
all interrupt callbacks are set to the corresponding weak functions:
examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback().
[..]
Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
functionalities in the Init / DeInit only when these callbacks are null
(not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit
keep and use the user MspInit / MspDeInit callbacks(registered beforehand)
[..]
Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only.
Exception done MspInit / MspDeInit that can be registered / unregistered
in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state,
......@@ -156,6 +163,7 @@ all interrupt callbacks are set to the corresponding weak functions:
In that case first register the MspInit/MspDeInit user callbacks
using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function.
[..]
When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or
not defined, the callback registration feature is not available and all callbacks
are set to the corresponding weak functions.
......@@ -482,11 +490,11 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat
/* Check the parameters */
assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if ((pData == NULL) && (Length > 0U))
{
......@@ -934,11 +942,11 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel
/* Check the parameters */
assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if ((pData == NULL) && (Length > 0U))
{
......@@ -1513,11 +1521,11 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe
/* Check the parameters */
assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if ((pData == NULL) && (Length > 0U))
{
......@@ -2061,11 +2069,11 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel
assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if ((pData == NULL) && (Length > 0U))
{
......@@ -2609,15 +2617,15 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_Ini
}
/* Check the parameters */
assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity));
assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity));
assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
......@@ -2775,7 +2783,7 @@ __weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
{
/* Check the parameters */
assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
/* Enable the encoder interface channels */
switch (Channel)
......@@ -2819,7 +2827,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channe
HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
{
/* Check the parameters */
assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channels 1 and 2
(in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
......@@ -2865,7 +2873,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel
HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
{
/* Check the parameters */
assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
/* Enable the encoder interface channels */
/* Enable the capture compare Interrupts 1 and/or 2 */
......@@ -2915,7 +2923,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Cha
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
{
/* Check the parameters */
assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channels 1 and 2
(in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
......@@ -2966,16 +2974,17 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chan
* @param Length The length of data to be transferred from TIM peripheral to memory.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
uint32_t *pData2, uint16_t Length)
{
/* Check the parameters */
assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U))
{
......@@ -3103,7 +3112,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
{
/* Check the parameters */
assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channels 1 and 2
(in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
......@@ -3738,9 +3747,14 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @note To output a waveform with a minimum delay user can enable the fast
* mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx
* output is forced in response to the edge detection on TIx input,
* without taking in account the comparison.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, uint32_t OutputChannel, uint32_t InputChannel)
HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
uint32_t OutputChannel, uint32_t InputChannel)
{
TIM_OC_InitTypeDef temp1;
......@@ -3894,11 +3908,11 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
assert_param(IS_TIM_DMA_LENGTH(BurstLength));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if ((BurstBuffer == NULL) && (BurstLength > 0U))
{
......@@ -3941,7 +3955,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer,
(uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
{
return HAL_ERROR;
}
......@@ -3957,7 +3972,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer,
(uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
{
return HAL_ERROR;
}
......@@ -3973,7 +3989,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer,
(uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
{
return HAL_ERROR;
}
......@@ -3989,7 +4006,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer,
(uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
{
return HAL_ERROR;
}
......@@ -4005,7 +4023,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer,
(uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
{
return HAL_ERROR;
}
......@@ -4021,7 +4040,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t
htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer,
(uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK)
{
return HAL_ERROR;
}
......@@ -4151,8 +4171,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B
* @note This function should be used only when BurstLength is equal to DMA data transfer length.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
uint32_t *BurstBuffer, uint32_t BurstLength)
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength)
{
/* Check the parameters */
assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
......@@ -4160,11 +4180,11 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B
assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
assert_param(IS_TIM_DMA_LENGTH(BurstLength));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if ((BurstBuffer == NULL) && (BurstLength > 0U))
{
......@@ -4780,7 +4800,7 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveC
htim->State = HAL_TIM_STATE_BUSY;
if(TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
{
htim->State = HAL_TIM_STATE_READY;
__HAL_UNLOCK(htim);
......@@ -4821,7 +4841,7 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim,
htim->State = HAL_TIM_STATE_BUSY;
if(TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
{
htim->State = HAL_TIM_STATE_READY;
__HAL_UNLOCK(htim);
......@@ -5118,7 +5138,8 @@ __weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
* @param pCallback pointer to the callback function
* @retval status
*/
HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback)
HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
pTIM_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c
......@@ -73,7 +73,7 @@
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"
......@@ -397,11 +397,11 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32
/* Check the parameters */
assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if (((uint32_t)pData == 0U) && (Length > 0U))
{
......@@ -709,11 +709,11 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if (((uint32_t)pData == 0U) && (Length > 0U))
{
......@@ -1117,11 +1117,11 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
if ((htim->State == HAL_TIM_STATE_BUSY))
if (htim->State == HAL_TIM_STATE_BUSY)
{
return HAL_BUSY;
}
else if ((htim->State == HAL_TIM_STATE_READY))
else if (htim->State == HAL_TIM_STATE_READY)
{
if (((uint32_t)pData == 0U) && (Length > 0U))
{
......@@ -1466,7 +1466,8 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t
* @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource)
{
/* Check the parameters */
assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
......@@ -1521,7 +1522,8 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t
* @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource)
{
/* Check the parameters */
assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
......@@ -1577,7 +1579,8 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32
* @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource)
{
/* Check the parameters */
assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
......@@ -1632,7 +1635,7 @@ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
uint32_t tmpsmcr;
/* Check the parameters */
assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance));
assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
......@@ -1665,16 +1668,19 @@ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
/* Select the TRGO source */
tmpcr2 |= sMasterConfig->MasterOutputTrigger;
/* Update TIMx CR2 */
htim->Instance->CR2 = tmpcr2;
if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
{
/* Reset the MSM Bit */
tmpsmcr &= ~TIM_SMCR_MSM;
/* Set master mode */
tmpsmcr |= sMasterConfig->MasterSlaveMode;
/* Update TIMx CR2 */
htim->Instance->CR2 = tmpcr2;
/* Update TIMx SMCR */
htim->Instance->SMCR = tmpsmcr;
}
/* Change the htim state */
htim->State = HAL_TIM_STATE_READY;
......@@ -1690,6 +1696,9 @@ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
* @param htim TIM handle
* @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
* contains the BDTR Register configuration information for the TIM peripheral.
* @note Interrupts can be generated when an active level is detected on the
* break input, the break 2 input or the system break input. Break
* interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
......@@ -1763,10 +1772,10 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim,
{
uint32_t tmporx;
uint32_t bkin_enable_mask = 0U;
uint32_t bkin_polarity_mask = 0U;
uint32_t bkin_enable_bitpos = 0U;
uint32_t bkin_polarity_bitpos = 0U;
uint32_t bkin_enable_mask;
uint32_t bkin_polarity_mask;
uint32_t bkin_enable_bitpos;
uint32_t bkin_polarity_bitpos;
/* Check the parameters */
assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
......@@ -1800,12 +1809,20 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim,
{
bkin_enable_mask = TIM1_AF1_BKDF1BKE;
bkin_enable_bitpos = 8;
bkin_polarity_mask = 0U;
bkin_polarity_bitpos = 0U;
break;
}
default:
{
bkin_enable_mask = 0U;
bkin_polarity_mask = 0U;
bkin_enable_bitpos = 0U;
bkin_polarity_bitpos = 0U;
break;
}
}
switch (BreakInput)
{
......@@ -2054,7 +2071,7 @@ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions
/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
* @{
*/
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c
......@@ -220,9 +220,6 @@ ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStru
if (currentpin)
{
/* Pin Mode configuration */
LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
{
/* Check Speed mode parameters */
......@@ -230,6 +227,12 @@ ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStru
/* Speed mode configuration */
LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
/* Check Output mode parameters */
assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
/* Output mode configuration*/
LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
}
/* Pull-up Pull down resistor configuration*/
......@@ -250,19 +253,11 @@ ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStru
LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate);
}
}
/* Pin Mode configuration */
LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
}
pinpos++;
}
if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
{
/* Check Output mode parameters */
assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
/* Output mode configuration*/
LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
}
return (SUCCESS);
}
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c
......@@ -163,7 +163,7 @@ uint32_t RCC_PLLI2S_GetFreqDomain_SPDIFRX(void);
*/
ErrorStatus LL_RCC_DeInit(void)
{
uint32_t vl_mask = 0xFFFFFFFFU;
__IO uint32_t vl_mask;
/* Set HSION bit */
LL_RCC_HSI_Enable();
......@@ -175,10 +175,13 @@ ErrorStatus LL_RCC_DeInit(void)
/* Reset CFGR register */
LL_RCC_WriteReg(CFGR, 0x00000000U);
/* Read CR register */
vl_mask = LL_RCC_ReadReg(CR);
/* Reset HSEON, HSEBYP, PLLON, CSSON, PLLI2SON and PLLSAION bits */
CLEAR_BIT(vl_mask, (RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_PLLSAION | RCC_CR_PLLI2SON));
/* Write new mask in CR register */
/* Write new value in CR register */
LL_RCC_WriteReg(CR, vl_mask);
/* Set HSITRIM bits to the reset value*/
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c
......@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32F7xx_LL_Driver
* @{
......@@ -41,14 +41,6 @@
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup USART_LL_Private_Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup USART_LL_Private_Macros
* @{
......
templates/f7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usb.c
......@@ -94,6 +94,11 @@ HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef c
/* Init The ULPI Interface */
USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
#if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F732xx) || defined(STM32F733xx)
/* Select ULPI Interface */
USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPI_UTMI_SEL;
#endif /* defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F732xx) || defined(STM32F733xx) */
/* Select vbus source */
USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
if (cfg.use_external_vbus == 1U)
......@@ -115,7 +120,7 @@ HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef c
USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
/* Select UTMI Interace */
USBx->GUSBCFG &= ~ USB_OTG_GUSBCFG_ULPI_UTMI_SEL;
USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_ULPI_UTMI_SEL;
USBx->GCCFG |= USB_OTG_GCCFG_PHYHSEN;
/* Enables control of a High Speed USB PHY */
......@@ -169,7 +174,7 @@ HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx,
used by application. In the low AHB frequency range it is used to stretch enough the USB response
time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access
latency to the Data FIFO */
if (speed == USB_OTG_SPEED_FULL)
if (speed == USBD_FS_SPEED)
{
if ((hclk >= 14200000U) && (hclk < 15000000U))
{
......@@ -222,7 +227,7 @@ HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx,
UsbTrd = 0x6U;
}
}
else if (speed == USB_OTG_SPEED_HIGH)
else if (speed == USBD_HS_SPEED)
{
UsbTrd = USBD_HS_TRDT_VALUE;
}
......@@ -314,6 +319,8 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf
/* VBUS Sensing setup */
if (cfg.vbus_sensing_enable == 0U)
{
USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS;
/* Deactivate VBUS Sensing B */
USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
......@@ -335,33 +342,33 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf
if (cfg.phy_itface == USB_OTG_ULPI_PHY)
{
if (cfg.speed == USB_OTG_SPEED_HIGH)
if (cfg.speed == USBD_HS_SPEED)
{
/* Set High speed phy */
/* Set Core speed to High speed mode */
(void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH);
}
else
{
/* set High speed phy in Full speed mode */
/* Set Core speed to Full speed mode */
(void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL);
}
}
else if (cfg.phy_itface == USB_OTG_HS_EMBEDDED_PHY)
{
if (cfg.speed == USB_OTG_SPEED_HIGH)
if (cfg.speed == USBD_HS_SPEED)
{
/* Set High speed phy */
/* Set Core speed to High speed mode */
(void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH);
}
else
{
/* set High speed phy in Full speed mode */
/* Set Core speed to Full speed mode */
(void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL);
}
}
else
{
/* Set Full speed phy */
/* Set Core speed to Full speed mode */
(void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL);
}
......@@ -427,17 +434,6 @@ HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cf
USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
if (cfg.dma_enable == 1U)
{
/*Set threshold parameters */
USBx_DEVICE->DTHRCTL = USB_OTG_DTHRCTL_TXTHRLEN_6 |
USB_OTG_DTHRCTL_RXTHRLEN_6;
USBx_DEVICE->DTHRCTL |= USB_OTG_DTHRCTL_RXTHREN |
USB_OTG_DTHRCTL_ISOTHREN |
USB_OTG_DTHRCTL_NONISOTHREN;
}
/* Disable all interrupts. */
USBx->GINTMSK = 0U;
......@@ -542,8 +538,8 @@ HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed)
* @param USBx Selected device
* @retval speed device speed
* This parameter can be one of these values:
* @arg USB_OTG_SPEED_HIGH: High speed mode
* @arg USB_OTG_SPEED_FULL: Full speed mode
* @arg PCD_SPEED_HIGH: High speed mode
* @arg PCD_SPEED_FULL: Full speed mode
*/
uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
{
......@@ -553,16 +549,16 @@ uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ)
{
speed = USB_OTG_SPEED_HIGH;
speed = USBD_HS_SPEED;
}
else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) ||
(DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ))
{
speed = USB_OTG_SPEED_FULL;
speed = USBD_FS_SPEED;
}
else
{
speed = 0U;
speed = 0xFU;
}
return speed;
......@@ -659,6 +655,12 @@ HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EP
/* Read DEPCTLn register */
if (ep->is_in == 1U)
{
if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
{
USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK;
USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS;
}
USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)));
USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)));
USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP |
......@@ -669,6 +671,12 @@ HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EP
}
else
{
if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
{
USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK;
USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS;
}
USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16));
USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16));
USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP |
......@@ -694,11 +702,23 @@ HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, U
/* Read DEPCTLn register */
if (ep->is_in == 1U)
{
if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
{
USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK;
USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS;
}
USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)));
}
else
{
if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
{
USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK;
USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS;
}
USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16));
}
......@@ -757,9 +777,27 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef
{
USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr);
}
if (ep->type == EP_TYPE_ISOC)
{
if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U)
{
USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
}
else
{
USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
}
}
/* EP enable, IN data in FIFO */
USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
}
else
{
/* EP enable, IN data in FIFO */
USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
if (ep->type != EP_TYPE_ISOC)
{
/* Enable the Tx FIFO Empty Interrupt for this EP */
......@@ -768,9 +806,7 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef
USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK);
}
}
}
if (ep->type == EP_TYPE_ISOC)
else
{
if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U)
{
......@@ -780,16 +816,11 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef
{
USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
}
}
/* EP enable, IN data in FIFO */
USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
if (ep->type == EP_TYPE_ISOC)
{
(void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma);
}
}
}
else /* OUT endpoint */
{
/* Program the transfer size and packet count as follows:
......@@ -886,18 +917,21 @@ HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDe
{
USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr);
}
/* EP enable, IN data in FIFO */
USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
}
else
{
/* EP enable, IN data in FIFO */
USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
/* Enable the Tx FIFO Empty Interrupt for this EP */
if (ep->xfer_len > 0U)
{
USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK);
}
}
/* EP enable, IN data in FIFO */
USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
}
else /* OUT endpoint */
{
......@@ -955,7 +989,7 @@ HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uin
count32b = ((uint32_t)len + 3U) / 4U;
for (i = 0U; i < count32b; i++)
{
USBx_DFIFO((uint32_t)ch_ep_num) = *((__packed uint32_t *)pSrc);
USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc);
pSrc++;
}
}
......@@ -964,15 +998,10 @@ HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uin
}
/**
* @brief USB_ReadPacket : read a packet from the Tx FIFO associated
* with the EP/channel
* @brief USB_ReadPacket : read a packet from the RX FIFO
* @param USBx Selected device
* @param dest source pointer
* @param len Number of bytes to read
* @param dma USB dma enabled or disabled
* This parameter can be one of these values:
* 0 : DMA feature not used
* 1 : DMA feature used
* @retval pointer to destination buffer
*/
void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
......@@ -984,7 +1013,7 @@ void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
for (i = 0U; i < count32b; i++)
{
*(__packed uint32_t *)pDest = USBx_DFIFO(0U);
__UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U));
pDest++;
}
......@@ -1256,13 +1285,9 @@ HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx)
{
uint32_t USBx_BASE = (uint32_t)USBx;
/* Set the MPS of the IN EP based on the enumeration speed */
/* Set the MPS of the IN EP0 to 64 bytes */
USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
{
USBx_INEP(0U)->DIEPCTL |= 3U;
}
USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
return HAL_OK;
......@@ -1429,7 +1454,7 @@ HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef c
if ((USBx->CID & (0x1U << 8)) != 0U)
{
if (cfg.speed == USB_OTG_SPEED_FULL)
if (cfg.speed == USBH_FSLS_SPEED)
{
/* Force Device Enumeration to FS/LS mode only */
USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
......@@ -1590,9 +1615,9 @@ HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state)
* @param USBx Selected device
* @retval speed : Host speed
* This parameter can be one of these values:
* @arg USB_OTG_SPEED_HIGH: High speed mode
* @arg USB_OTG_SPEED_FULL: Full speed mode
* @arg USB_OTG_SPEED_LOW: Low speed mode
* @arg HCD_SPEED_HIGH: High speed mode
* @arg HCD_SPEED_FULL: Full speed mode
* @arg HCD_SPEED_LOW: Low speed mode
*/
uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx)
{
......@@ -1770,7 +1795,7 @@ HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDe
uint16_t num_packets;
uint16_t max_hc_pkt_count = 256U;
if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USB_OTG_SPEED_HIGH))
if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USBH_HS_SPEED))
{
if ((dma == 0U) && (hc->do_ping == 1U))
{
......@@ -1998,7 +2023,6 @@ HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
uint32_t value;
uint32_t i;
(void)USB_DisableGlobalInt(USBx);
/* Flush FIFO */
......@@ -2037,6 +2061,7 @@ HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
/* Clear any pending Host interrupts */
USBx_HOST->HAINT = 0xFFFFFFFFU;
USBx->GINTSTS = 0xFFFFFFFFU;
(void)USB_EnableGlobalInt(USBx);
return HAL_OK;
......
templates/f7/Inc/stm32_assert.h
......@@ -5,7 +5,7 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
......
templates/f7/Makefile
##########################################################################################################################
# File automatically-generated by tool: [projectgenerator] version: [3.5.2] date: [Sat Nov 02 10:20:31 CET 2019]
# File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Fri May 01 19:54:41 CEST 2020]
##########################################################################################################################
# ------------------------------------------------
......@@ -22,7 +22,7 @@ TARGET = f7
# debug build?
DEBUG = 0
# optimization
OPT = -O2
OPT = -O3
#######################################
......@@ -39,7 +39,6 @@ C_SOURCES = \
Src/main.c \
Src/stm32f7xx_it.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c \
......@@ -121,7 +120,6 @@ C_INCLUDES = \
-IInc \
-IDrivers/STM32F7xx_HAL_Driver/Inc \
-IDrivers/CMSIS/Device/ST/STM32F7xx/Include \
-IDrivers/CMSIS/Include \
-IDrivers/CMSIS/Include
......
templates/f7/Src/main.c
......@@ -72,7 +72,6 @@ int main(void)
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
......@@ -157,7 +156,6 @@ void SystemClock_Config(void)
}
LL_Init1msTick(216000000);
LL_SYSTICK_SetClkSource(LL_SYSTICK_CLKSOURCE_HCLK);
LL_SetSystemCoreClock(216000000);
LL_RCC_SetUSARTClockSource(LL_RCC_USART2_CLKSOURCE_PCLK1);
LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK1);
......
templates/f7/f7.ioc
#MicroXplorer Configuration settings - do not modify
File.Version=6
KeepUserPlacement=true
Mcu.Family=STM32F7
Mcu.IP0=CORTEX_M7
Mcu.IP1=NVIC
Mcu.IP2=RCC
Mcu.IP3=SYS
ProjectManager.MainLocation=Src
RCC.MCOFreq_Value=72000000
RCC.USART1Freq_Value=108000000
RCC.SAI1Freq_Value=192000000
USART2.IPParameters=VirtualMode-Asynchronous
RCC.CortexFreq_Value=216000000
RCC.TIM17Freq_Value=72000000
PG6.Signal=GPIO_Output
ProjectManager.KeepUserCode=true
Mcu.UserName=STM32F746ZGTx
PD9.GPIOParameters=GPIO_Label
PG6.Locked=true
RCC.PLLCLKFreq_Value=216000000
PB14.GPIO_Label=LD3 [Red]
PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
PA14.GPIO_Label=TCK
RCC.PLLQCLKFreq_Value=144000000
RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_USART2_UART_Init-USART2-false-LL-true,4-MX_USART3_UART_Init-USART3-false-LL-true,5-MX_CORTEX_M7_Init-CORTEX_M7-false-LL-true
PD8.Locked=true
RCC.RTCFreq_Value=32000
PD6.Locked=true
PB0.GPIO_Label=LD1 [Green]
PC14/OSC32_IN.Mode=LSE-External-Oscillator
RCC.PLLI2SRCLKFreq_Value=192000000
RCC.USART2Freq_Value=54000000
PC13.GPIO_Label=USER_Btn [B1]
PD9.Mode=Asynchronous
PinOutPanel.RotationAngle=0
RCC.MCO1PinFreq_Value=16000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
ProjectManager.StackSize=0x400
SH.GPXTI13.0=GPIO_EXTI13
USART3.VirtualMode-Asynchronous=VM_ASYNC
RCC.I2C3Freq_Value=54000000
RCC.LPTIM1Freq_Value=54000000
Mcu.IP4=USART2
RCC.FCLKCortexFreq_Value=216000000
Mcu.IP5=USART3
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
Mcu.IP2=RCC
Mcu.IP3=SYS
Mcu.IP0=CORTEX_M7
Mcu.IP1=NVIC
Mcu.UserConstants=
RCC.SDMMCFreq_Value=216000000
SH.GPXTI13.ConfNb=1
Mcu.ThirdPartyNb=0
PH0/OSC_IN.Mode=HSE-External-Clock-Source
RCC.HCLKFreq_Value=216000000
RCC.I2C4Freq_Value=54000000
Mcu.IPNb=6
Mcu.Name=STM32F746ZGTx
Mcu.Package=LQFP144
RCC.I2SClocksFreq_Value=48000000
RCC.PLLI2SRoutputFreq_Value=192000000
ProjectManager.PreviousToolchain=
RCC.APB2TimFreq_Value=216000000
RCC.SPDIFRXFreq_Value=192000000
RCC.VcooutputI2S=48000000
PH1/OSC_OUT.Signal=RCC_OSC_OUT
PD8.GPIOParameters=GPIO_Label
Mcu.Pin6=PB14
RCC.SAI2Freq_Value=192000000
PD8.Signal=USART3_TX
Mcu.Pin7=PD8
Mcu.Pin8=PD9
Mcu.Pin9=PG6
RCC.VCOSAIOutputFreq_Value=384000000
RCC.AHBFreq_Value=216000000
RCC.TIM2Freq_Value=72000000
Mcu.Pin0=PC13
Mcu.Pin1=PC14/OSC32_IN
Mcu.Pin10=PG7
Mcu.Pin11=PA13
Mcu.Pin12=PA14
Mcu.Pin13=PD5
Mcu.Pin14=PD6
Mcu.Pin15=PD7
Mcu.Pin16=PB7
Mcu.Pin17=VP_SYS_VS_Systick
PD5.Mode=Asynchronous
Mcu.Pin2=PC15/OSC32_OUT
Mcu.Pin3=PH0/OSC_IN
RCC.USART3Freq_Value=54000000
Mcu.Pin4=PH1/OSC_OUT
Mcu.Pin5=PB0
Mcu.Pin6=PB14
Mcu.Pin7=PD8
Mcu.Pin8=PD9
Mcu.Pin9=PG6
Mcu.PinsNb=18
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F746ZGTx
MxCube.Version=5.4.0
MxDb.Version=DB.5.0.40
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
RCC.PLLSAIRCLKFreq_Value=192000000
ProjectManager.ProjectBuild=false
RCC.HSE_VALUE=8000000
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
USART2.VirtualMode-Asynchronous=VM_ASYNC
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
PA13.GPIOParameters=GPIO_Label
PA13.GPIO_Label=TMS
PA13.Locked=true
PA13.Mode=Serial_Wire
PA13.Signal=SYS_JTMS-SWDIO
PA14.GPIOParameters=GPIO_Label
PA14.GPIO_Label=TCK
PA14.Locked=true
PA14.Mode=Serial_Wire
PA14.Signal=SYS_JTCK-SWCLK
RCC.PLLMUL=RCC_PLL_MUL9
PD7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
PH0/OSC_IN.Locked=true
ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.16.0
MxDb.Version=DB.5.0.60
PB0.GPIOParameters=GPIO_Label
PB0.GPIO_Label=LD1 [Green]
ProjectManager.BackupPrevious=false
RCC.VCOInputFreq_Value=2000000
PA14.Mode=Serial_Wire
PH1/OSC_OUT.Locked=true
File.Version=6
PB7.Signal=GPIO_Output
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
PC15/OSC32_OUT.Locked=true
PH1/OSC_OUT.Mode=HSE-External-Clock-Source
ProjectManager.HalAssertFull=false
PB0.Locked=true
PB0.Signal=GPIO_Output
PB14.GPIOParameters=GPIO_Label
PB14.GPIO_Label=LD3 [Red]
PB14.Locked=true
PB14.Signal=GPIO_Output
PB7.GPIOParameters=GPIO_Label
ProjectManager.ProjectName=f7
RCC.TIM1Freq_Value=72000000
PD7.GPIO_Label=CRYPTO_BUSY
PA13.GPIOParameters=GPIO_Label
RCC.PLLMCOFreq_Value=72000000
PB7.GPIO_Label=LD2 [Blue]
PB7.Locked=true
PB7.Signal=GPIO_Output
PC13.GPIOParameters=GPIO_Label
PC13.GPIO_Label=USER_Btn [B1]
RCC.MCO2PinFreq_Value=216000000
Mcu.Package=LQFP144
RCC.TIM15Freq_Value=72000000
RCC.ADC34outputFreq_Value=72000000
PC14/OSC32_IN.Signal=RCC_OSC32_IN
PA14.Locked=true
ProjectManager.ToolChainLocation=
RCC.LSI_VALUE=32000
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
USART3.IPParameters=VirtualMode-Asynchronous
PA15.Signal=SYS_JTDI
PB14.GPIOParameters=GPIO_Label
RCC.TIM16Freq_Value=72000000
RCC.APB2CLKDivider=RCC_HCLK_DIV2
RCC.CECFreq_Value=32786.88524590164
RCC.APB1TimFreq_Value=108000000
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
PD6.Signal=USART2_RX
ProjectManager.CustomerFirmwarePackage=
RCC.PLLSAIQCLKFreq_Value=192000000
PB3.Locked=true
PB4.Signal=SYS_JTRST
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
RCC.I2SFreq_Value=192000000
RCC.PLLQoutputFreq_Value=144000000
ProjectManager.ProjectFileName=f7.ioc
RCC.ADC12outputFreq_Value=72000000
PG7.Locked=true
PG7.Signal=GPIO_Input
RCC.UART7Freq_Value=54000000
PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
Mcu.PinsNb=21
ProjectManager.NoMain=false
PC13.Locked=true
PC13.Signal=GPXTI13
PC14/OSC32_IN.Locked=true
PC14/OSC32_IN.Mode=LSE-External-Oscillator
PC14/OSC32_IN.Signal=RCC_OSC32_IN
PC15/OSC32_OUT.Locked=true
PC15/OSC32_OUT.Mode=LSE-External-Oscillator
PC15/OSC32_OUT.Signal=RCC_OSC32_OUT
PCC.Checker=false
PCC.Line=STM32F7x6
PCC.MCU=STM32F746ZGTx
PCC.PartNumber=STM32F746ZGTx
PCC.Seq0=0
PCC.Series=STM32F7
PCC.Temperature=25
PCC.Vdd=3.6
PD5.Mode=Asynchronous
PD7.Signal=GPIO_Output
ProjectManager.DefaultFWLocation=true
PD5.Signal=USART2_TX
PD6.Locked=true
PD9.Signal=USART3_RX
ProjectManager.DeletePrevious=true
RCC.UART8Freq_Value=54000000
PB14.Locked=true
RCC.APB1CLKDivider=RCC_HCLK_DIV4
RCC.LCDTFToutputFreq_Value=96000000
boardIOC=true
PD6.Mode=Asynchronous
PD6.Signal=USART2_RX
PD7.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
PD7.GPIO_Label=CRYPTO_BUSY
PD7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
PD7.Locked=true
PD7.PinState=GPIO_PIN_SET
PD7.Signal=GPIO_Output
PD8.GPIOParameters=GPIO_Label
NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
RCC.FamilyName=M
PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
PD8.Locked=true
RCC.WatchDogFreq_Value=32000
PA13.Signal=SYS_JTMS-SWDIO
PA15.Locked=true
ProjectManager.TargetToolchain=Makefile
RCC.USART6Freq_Value=108000000
PB7.GPIOParameters=GPIO_Label
RCC.USBFreq_Value=144000000
RCC.PLLSAIoutputFreq_Value=192000000
PD7.Locked=true
PD8.Mode=Asynchronous
PD8.Signal=USART3_TX
PD9.GPIOParameters=GPIO_Label
PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
PD9.Locked=true
PD9.Mode=Asynchronous
PD9.Signal=USART3_RX
RCC.VCOI2SOutputFreq_Value=384000000
PB14.Signal=GPIO_Output
PG6.GPIOParameters=GPIO_Label
PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
PG6.Locked=true
PG6.Signal=GPIO_Output
PG7.GPIOParameters=GPIO_Label
PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
PG7.Locked=true
PG7.Signal=GPIO_Input
PH0/OSC_IN.GPIOParameters=GPIO_Label
PH0/OSC_IN.GPIO_Label=MCO [STM32F103CBT6_PA8]
PH0/OSC_IN.Locked=true
PH0/OSC_IN.Mode=HSE-External-Clock-Source
PH0/OSC_IN.Signal=RCC_OSC_IN
PH1/OSC_OUT.Locked=true
PH1/OSC_OUT.Mode=HSE-External-Clock-Source
PH1/OSC_OUT.Signal=RCC_OSC_OUT
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32F746ZGTx
ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.15.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
PD7.PinState=GPIO_PIN_SET
RCC.PLLSAIPCLKFreq_Value=192000000
board=NUCLEO-F746ZG
RCC.VCOOutputFreq_Value=432000000
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=0
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=f7.ioc
ProjectManager.ProjectName=f7
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=Makefile
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_USART2_UART_Init-USART2-false-LL-true,4-MX_USART3_UART_Init-USART3-false-LL-true
RCC.48MHZClocksFreq_Value=24000000
RCC.ADC12outputFreq_Value=72000000
RCC.ADC34outputFreq_Value=72000000
RCC.AHBFreq_Value=216000000
RCC.APB1CLKDivider=RCC_HCLK_DIV4
RCC.APB1Freq_Value=54000000
RCC.APB1TimFreq_Value=108000000
RCC.APB2CLKDivider=RCC_HCLK_DIV2
RCC.VCOOutput2Freq_Value=8000000
PH0/OSC_IN.Signal=RCC_OSC_IN
RCC.APB2Freq_Value=108000000
RCC.APB2TimFreq_Value=216000000
RCC.CECFreq_Value=32786.88524590164
RCC.CortexFreq_Value=216000000
RCC.EthernetFreq_Value=216000000
RCC.FCLKCortexFreq_Value=216000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=216000000
RCC.HSE_VALUE=8000000
RCC.HSI_VALUE=16000000
RCC.TIM8Freq_Value=72000000
RCC.UART4Freq_Value=54000000
MxCube.Version=5.6.0
RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
RCC.I2C1Freq_Value=54000000
RCC.I2C2Freq_Value=54000000
RCC.I2C3Freq_Value=54000000
RCC.I2C4Freq_Value=54000000
RCC.I2SClocksFreq_Value=48000000
RCC.I2SFreq_Value=192000000
RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
RCC.LCDTFToutputFreq_Value=96000000
RCC.LPTIM1Freq_Value=54000000
RCC.LSI_VALUE=32000
RCC.MCO1PinFreq_Value=16000000
RCC.MCO2PinFreq_Value=216000000
RCC.MCOFreq_Value=72000000
RCC.PLLCLKFreq_Value=216000000
RCC.PLLI2SPCLKFreq_Value=192000000
RCC.PLLI2SQCLKFreq_Value=192000000
RCC.PLLI2SRCLKFreq_Value=192000000
RCC.PLLI2SRoutputFreq_Value=192000000
RCC.PLLM=4
RCC.PLLMCOFreq_Value=72000000
RCC.PLLMUL=RCC_PLL_MUL9
RCC.PLLN=216
RCC.PLLQ=3
RCC.PLLQCLKFreq_Value=144000000
RCC.PLLQoutputFreq_Value=144000000
RCC.PLLSAIPCLKFreq_Value=192000000
RCC.PLLSAIQCLKFreq_Value=192000000
RCC.PLLSAIRCLKFreq_Value=192000000
RCC.PLLSAIoutputFreq_Value=192000000
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
PC13.GPIOParameters=GPIO_Label
PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
RCC.RNGFreq_Value=144000000
RCC.RTCFreq_Value=32000
VP_SYS_VS_Systick.Mode=SysTick
RCC.EthernetFreq_Value=216000000
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
RCC.UART5Freq_Value=54000000
PA13.Mode=Serial_Wire
ProjectManager.FreePins=false
RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
ProjectManager.AskForMigrate=true
Mcu.Name=STM32F746ZGTx
RCC.PLLI2SQCLKFreq_Value=192000000
RCC.RTCHSEDivFreq_Value=4000000
RCC.SAI1Freq_Value=192000000
RCC.SAI2Freq_Value=192000000
RCC.SDMMCFreq_Value=216000000
RCC.SPDIFRXFreq_Value=192000000
PA13.GPIO_Label=TMS
ProjectManager.UnderRoot=false
ProjectManager.CoupleFile=false
RCC.48MHZClocksFreq_Value=24000000
PB4.Locked=true
PB3.Signal=SYS_JTDO-SWO
RCC.SYSCLKFreq_VALUE=216000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
RCC.TIM15Freq_Value=72000000
RCC.TIM16Freq_Value=72000000
RCC.TIM17Freq_Value=72000000
RCC.TIM1Freq_Value=72000000
Mcu.Pin20=VP_SYS_VS_Systick
NVIC.ForceEnableDMAVector=true
KeepUserPlacement=true
PA14.GPIOParameters=GPIO_Label
PC14/OSC32_IN.Locked=true
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
PA13.Locked=true
PC15/OSC32_OUT.Mode=LSE-External-Oscillator
ProjectManager.CompilerOptimize=6
PA14.Signal=SYS_JTCK-SWCLK
ProjectManager.HeapSize=0x200
Mcu.Pin15=PD6
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
Mcu.Pin16=PD7
Mcu.Pin13=PA15
Mcu.Pin14=PD5
Mcu.Pin19=PB7
RCC.TIM20Freq_Value=72000000
RCC.TIM2Freq_Value=72000000
ProjectManager.ComputerToolchain=false
Mcu.Pin17=PB3
RCC.HSI_VALUE=16000000
Mcu.Pin18=PB4
RCC.TIM3Freq_Value=72000000
RCC.TIM8Freq_Value=72000000
RCC.UART4Freq_Value=54000000
RCC.UART5Freq_Value=54000000
RCC.UART7Freq_Value=54000000
RCC.UART8Freq_Value=54000000
RCC.USART1Freq_Value=108000000
RCC.USART2Freq_Value=54000000
RCC.USART3Freq_Value=54000000
RCC.USART6Freq_Value=108000000
RCC.USBFreq_Value=144000000
RCC.VCOI2SOutputFreq_Value=384000000
RCC.VCOInputFreq_Value=2000000
RCC.VCOOutput2Freq_Value=8000000
RCC.VCOOutputFreq_Value=432000000
RCC.VCOSAIOutputFreq_Value=384000000
RCC.VcooutputI2S=48000000
RCC.WatchDogFreq_Value=32000
SH.GPXTI13.0=GPIO_EXTI13
SH.GPXTI13.ConfNb=1
USART2.IPParameters=VirtualMode-Asynchronous
USART2.VirtualMode-Asynchronous=VM_ASYNC
USART3.IPParameters=VirtualMode-Asynchronous
USART3.VirtualMode-Asynchronous=VM_ASYNC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=NUCLEO-F746ZG
boardIOC=true
PH0/OSC_IN.GPIO_Label=MCO [STM32F103CBT6_PA8]
RCC.PLLQ=3
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
Mcu.Pin11=PA13
Mcu.Pin12=PA14
RCC.PLLM=4
RCC.PLLN=216
Mcu.Pin10=PG7
PB7.Locked=true
PC15/OSC32_OUT.Signal=RCC_OSC32_OUT
RCC.I2C2Freq_Value=54000000
PD9.Locked=true
RCC.APB1Freq_Value=54000000
PB0.Signal=GPIO_Output
ProjectManager.DeviceId=STM32F746ZGTx
PG7.GPIOParameters=GPIO_Label
PD7.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
ProjectManager.LibraryCopy=0
PH0/OSC_IN.GPIOParameters=GPIO_Label
templates/maixduino/platformio.ini
......@@ -2,17 +2,11 @@
platform = kendryte210
board = sipeed-maixduino
framework = arduino
; change microcontroller
platform_packages =
toolchain-kendryte210 @ 8.2.0
board_build.mcu = K210
; change MCU frequency
board_build.f_cpu = 600000000L
; upload speed
upload_speed = 750000
; compiler optimizations to favour speed over size
build_flags = -O3 -UDEBUG -DNDEBUG
build_unflags = -Os
build_type = release
templates/uno/platformio.ini
[env:uno]
platform = atmelavr
platform_packages =
toolchain-atmelavr @ 1.70300.191015
framework = arduino
board = uno
build_flags = -Os -UDEBUG -DNDEBUG
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or sign in to comment