Skip to content

lwc / compare

Go to a project
Commit 07235e3c by lwc-tester
Options

removed deprecated templates

parent fb64fcfb
Expand all
Inline Side-by-side
Showing with 0 additions and 4951 deletions
templates/blackpill/.mxproject deleted 100644 → 0
[PreviousGenFiles]
HeaderPath=/home/sr/STM32Cube/blackpill/Inc
HeaderFiles=stm32f1xx_it.h;stm32_assert.h;stm32f1xx_hal_conf.h;main.h;
SourcePath=/home/sr/STM32Cube/blackpill/Src
SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;
[PreviousLibFiles]
LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;
[PreviousUsedMakefileFiles]
SourceFiles=Src/main.c;Src/stm32f1xx_it.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;/home/sr/STM32Cube/blackpill//startup_stm32f103xb.s;
HeaderPath=Drivers/STM32F1xx_HAL_Driver/Inc;Drivers/CMSIS/Device/ST/STM32F1xx/Include;Drivers/CMSIS/Include;Inc;
CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;HSI_VALUE:8000000;LSI_VALUE:40000;VDD_VALUE:3300;PREFETCH_ENABLE:1;
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_class_marks_example/ARM/arm_class_marks_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_class_marks_example_f32.c
*
* Description: Example code to calculate Minimum, Maximum
* Mean, std and variance of marks obtained in a class
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup ClassMarks Class Marks Example
*
* \par Description:
* \par
* Demonstrates the use the Maximum, Minimum, Mean, Standard Deviation, Variance
* and Matrix functions to calculate statistical values of marks obtained in a class.
*
* \note This example also demonstrates the usage of static initialization.
*
* \par Variables Description:
* \par
* \li \c testMarks_f32 points to the marks scored by 20 students in 4 subjects
* \li \c max_marks Maximum of all marks
* \li \c min_marks Minimum of all marks
* \li \c mean Mean of all marks
* \li \c var Variance of the marks
* \li \c std Standard deviation of the marks
* \li \c numStudents Total number of students in the class
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_mat_init_f32()
* - arm_mat_mult_f32()
* - arm_max_f32()
* - arm_min_f32()
* - arm_mean_f32()
* - arm_std_f32()
* - arm_var_f32()
*
* <b> Refer </b>
* \link arm_class_marks_example_f32.c \endlink
*
*/
/** \example arm_class_marks_example_f32.c
*/
#include "arm_math.h"
#define USE_STATIC_INIT
/* ----------------------------------------------------------------------
** Global defines
** ------------------------------------------------------------------- */
#define TEST_LENGTH_SAMPLES (20*4)
/* ----------------------------------------------------------------------
** List of Marks scored by 20 students for 4 subjects
** ------------------------------------------------------------------- */
const float32_t testMarks_f32[TEST_LENGTH_SAMPLES] =
{
42.000000, 37.000000, 81.000000, 28.000000,
83.000000, 72.000000, 36.000000, 38.000000,
32.000000, 51.000000, 63.000000, 64.000000,
97.000000, 82.000000, 95.000000, 90.000000,
66.000000, 51.000000, 54.000000, 42.000000,
67.000000, 56.000000, 45.000000, 57.000000,
67.000000, 69.000000, 35.000000, 52.000000,
29.000000, 81.000000, 58.000000, 47.000000,
38.000000, 76.000000, 100.000000, 29.000000,
33.000000, 47.000000, 29.000000, 50.000000,
34.000000, 41.000000, 61.000000, 46.000000,
52.000000, 50.000000, 48.000000, 36.000000,
47.000000, 55.000000, 44.000000, 40.000000,
100.000000, 94.000000, 84.000000, 37.000000,
32.000000, 71.000000, 47.000000, 77.000000,
31.000000, 50.000000, 49.000000, 35.000000,
63.000000, 67.000000, 40.000000, 31.000000,
29.000000, 68.000000, 61.000000, 38.000000,
31.000000, 28.000000, 28.000000, 76.000000,
55.000000, 33.000000, 29.000000, 39.000000
};
/* ----------------------------------------------------------------------
* Number of subjects X 1
* ------------------------------------------------------------------- */
const float32_t testUnity_f32[4] =
{
1.000, 1.000, 1.000, 1.000
};
/* ----------------------------------------------------------------------
** f32 Output buffer
** ------------------------------------------------------------------- */
static float32_t testOutput[TEST_LENGTH_SAMPLES];
/* ------------------------------------------------------------------
* Global defines
*------------------------------------------------------------------- */
#define NUMSTUDENTS 20
#define NUMSUBJECTS 4
/* ------------------------------------------------------------------
* Global variables
*------------------------------------------------------------------- */
uint32_t numStudents = 20;
uint32_t numSubjects = 4;
float32_t max_marks, min_marks, mean, std, var;
uint32_t student_num;
/* ----------------------------------------------------------------------------------
* Main f32 test function. It returns maximum marks secured and student number
* ------------------------------------------------------------------------------- */
int32_t main()
{
#ifndef USE_STATIC_INIT
arm_matrix_instance_f32 srcA;
arm_matrix_instance_f32 srcB;
arm_matrix_instance_f32 dstC;
/* Input and output matrices initializations */
arm_mat_init_f32(&srcA, numStudents, numSubjects, (float32_t *)testMarks_f32);
arm_mat_init_f32(&srcB, numSubjects, 1, (float32_t *)testUnity_f32);
arm_mat_init_f32(&dstC, numStudents, 1, testOutput);
#else
/* Static Initializations of Input and output matrix sizes and array */
arm_matrix_instance_f32 srcA = {NUMSTUDENTS, NUMSUBJECTS, (float32_t *)testMarks_f32};
arm_matrix_instance_f32 srcB = {NUMSUBJECTS, 1, (float32_t *)testUnity_f32};
arm_matrix_instance_f32 dstC = {NUMSTUDENTS, 1, testOutput};
#endif
/* ----------------------------------------------------------------------
*Call the Matrix multiplication process function
* ------------------------------------------------------------------- */
arm_mat_mult_f32(&srcA, &srcB, &dstC);
/* ----------------------------------------------------------------------
** Call the Max function to calculate max marks among numStudents
** ------------------------------------------------------------------- */
arm_max_f32(testOutput, numStudents, &max_marks, &student_num);
/* ----------------------------------------------------------------------
** Call the Min function to calculate min marks among numStudents
** ------------------------------------------------------------------- */
arm_min_f32(testOutput, numStudents, &min_marks, &student_num);
/* ----------------------------------------------------------------------
** Call the Mean function to calculate mean
** ------------------------------------------------------------------- */
arm_mean_f32(testOutput, numStudents, &mean);
/* ----------------------------------------------------------------------
** Call the std function to calculate standard deviation
** ------------------------------------------------------------------- */
arm_std_f32(testOutput, numStudents, &std);
/* ----------------------------------------------------------------------
** Call the var function to calculate variance
** ------------------------------------------------------------------- */
arm_var_f32(testOutput, numStudents, &var);
while(1); /* main function does not return */
}
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_class_marks_example/GCC/arm_class_marks_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_class_marks_example_f32.c
*
* Description: Example code to calculate Minimum, Maximum
* Mean, std and variance of marks obtained in a class
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup ClassMarks Class Marks Example
*
* \par Description:
* \par
* Demonstrates the use the Maximum, Minimum, Mean, Standard Deviation, Variance
* and Matrix functions to calculate statistical values of marks obtained in a class.
*
* \note This example also demonstrates the usage of static initialization.
*
* \par Variables Description:
* \par
* \li \c testMarks_f32 points to the marks scored by 20 students in 4 subjects
* \li \c max_marks Maximum of all marks
* \li \c min_marks Minimum of all marks
* \li \c mean Mean of all marks
* \li \c var Variance of the marks
* \li \c std Standard deviation of the marks
* \li \c numStudents Total number of students in the class
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_mat_init_f32()
* - arm_mat_mult_f32()
* - arm_max_f32()
* - arm_min_f32()
* - arm_mean_f32()
* - arm_std_f32()
* - arm_var_f32()
*
* <b> Refer </b>
* \link arm_class_marks_example_f32.c \endlink
*
*/
/** \example arm_class_marks_example_f32.c
*/
#include "arm_math.h"
#define USE_STATIC_INIT
/* ----------------------------------------------------------------------
** Global defines
** ------------------------------------------------------------------- */
#define TEST_LENGTH_SAMPLES (20*4)
/* ----------------------------------------------------------------------
** List of Marks scored by 20 students for 4 subjects
** ------------------------------------------------------------------- */
const float32_t testMarks_f32[TEST_LENGTH_SAMPLES] =
{
42.000000, 37.000000, 81.000000, 28.000000,
83.000000, 72.000000, 36.000000, 38.000000,
32.000000, 51.000000, 63.000000, 64.000000,
97.000000, 82.000000, 95.000000, 90.000000,
66.000000, 51.000000, 54.000000, 42.000000,
67.000000, 56.000000, 45.000000, 57.000000,
67.000000, 69.000000, 35.000000, 52.000000,
29.000000, 81.000000, 58.000000, 47.000000,
38.000000, 76.000000, 100.000000, 29.000000,
33.000000, 47.000000, 29.000000, 50.000000,
34.000000, 41.000000, 61.000000, 46.000000,
52.000000, 50.000000, 48.000000, 36.000000,
47.000000, 55.000000, 44.000000, 40.000000,
100.000000, 94.000000, 84.000000, 37.000000,
32.000000, 71.000000, 47.000000, 77.000000,
31.000000, 50.000000, 49.000000, 35.000000,
63.000000, 67.000000, 40.000000, 31.000000,
29.000000, 68.000000, 61.000000, 38.000000,
31.000000, 28.000000, 28.000000, 76.000000,
55.000000, 33.000000, 29.000000, 39.000000
};
/* ----------------------------------------------------------------------
* Number of subjects X 1
* ------------------------------------------------------------------- */
const float32_t testUnity_f32[4] =
{
1.000, 1.000, 1.000, 1.000
};
/* ----------------------------------------------------------------------
** f32 Output buffer
** ------------------------------------------------------------------- */
static float32_t testOutput[TEST_LENGTH_SAMPLES];
/* ------------------------------------------------------------------
* Global defines
*------------------------------------------------------------------- */
#define NUMSTUDENTS 20
#define NUMSUBJECTS 4
/* ------------------------------------------------------------------
* Global variables
*------------------------------------------------------------------- */
uint32_t numStudents = 20;
uint32_t numSubjects = 4;
float32_t max_marks, min_marks, mean, std, var;
uint32_t student_num;
/* ----------------------------------------------------------------------------------
* Main f32 test function. It returns maximum marks secured and student number
* ------------------------------------------------------------------------------- */
int32_t main()
{
#ifndef USE_STATIC_INIT
arm_matrix_instance_f32 srcA;
arm_matrix_instance_f32 srcB;
arm_matrix_instance_f32 dstC;
/* Input and output matrices initializations */
arm_mat_init_f32(&srcA, numStudents, numSubjects, (float32_t *)testMarks_f32);
arm_mat_init_f32(&srcB, numSubjects, 1, (float32_t *)testUnity_f32);
arm_mat_init_f32(&dstC, numStudents, 1, testOutput);
#else
/* Static Initializations of Input and output matrix sizes and array */
arm_matrix_instance_f32 srcA = {NUMSTUDENTS, NUMSUBJECTS, (float32_t *)testMarks_f32};
arm_matrix_instance_f32 srcB = {NUMSUBJECTS, 1, (float32_t *)testUnity_f32};
arm_matrix_instance_f32 dstC = {NUMSTUDENTS, 1, testOutput};
#endif
/* ----------------------------------------------------------------------
*Call the Matrix multiplication process function
* ------------------------------------------------------------------- */
arm_mat_mult_f32(&srcA, &srcB, &dstC);
/* ----------------------------------------------------------------------
** Call the Max function to calculate max marks among numStudents
** ------------------------------------------------------------------- */
arm_max_f32(testOutput, numStudents, &max_marks, &student_num);
/* ----------------------------------------------------------------------
** Call the Min function to calculate min marks among numStudents
** ------------------------------------------------------------------- */
arm_min_f32(testOutput, numStudents, &min_marks, &student_num);
/* ----------------------------------------------------------------------
** Call the Mean function to calculate mean
** ------------------------------------------------------------------- */
arm_mean_f32(testOutput, numStudents, &mean);
/* ----------------------------------------------------------------------
** Call the std function to calculate standard deviation
** ------------------------------------------------------------------- */
arm_std_f32(testOutput, numStudents, &std);
/* ----------------------------------------------------------------------
** Call the var function to calculate variance
** ------------------------------------------------------------------- */
arm_var_f32(testOutput, numStudents, &var);
while(1); /* main function does not return */
}
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_convolution_example/ARM/math_helper.h deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_convolution_example/GCC/math_helper.h deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_dotproduct_example/ARM/arm_dotproduct_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_dotproduct_example_f32.c
*
* Description: Example code computing dot product of two vectors.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup DotproductExample Dot Product Example
*
* \par Description:
* \par
* Demonstrates the use of the Multiply and Add functions to perform the dot product.
* The dot product of two vectors is obtained by multiplying corresponding elements
* and summing the products.
* \par Algorithm:
* \par
* The two input vectors \c A and \c B with length \c n, are multiplied element-by-element
* and then added to obtain dot product.
* \par
* This is denoted by the following equation:
* <pre> dotProduct = A[0] * B[0] + A[1] * B[1] + ... + A[n-1] * B[n-1]</pre>
*
* \par Block Diagram:
* \par
* \image html dotProduct.gif
*
* \par Variables Description:
* \par
* \li \c srcA_buf_f32 points to first input vector
* \li \c srcB_buf_f32 points to second input vector
* \li \c testOutput stores dot product of the two input vectors.
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_mult_f32()
* - arm_add_f32()
*
* <b> Refer </b>
* \link arm_dotproduct_example_f32.c \endlink
*
*/
/** \example arm_dotproduct_example_f32.c
*/
#include <math.h>
#include "arm_math.h"
/* ----------------------------------------------------------------------
* Defines each of the tests performed
* ------------------------------------------------------------------- */
#define MAX_BLOCKSIZE 32
#define DELTA (0.000001f)
/* ----------------------------------------------------------------------
* Test input data for Floating point Dot Product example for 32-blockSize
* Generated by the MATLAB randn() function
* ------------------------------------------------------------------- */
/* ----------------------------------------------------------------------
** Test input data of srcA for blockSize 32
** ------------------------------------------------------------------- */
float32_t srcA_buf_f32[MAX_BLOCKSIZE] =
{
-0.4325648115282207, -1.6655843782380970, 0.1253323064748307,
0.2876764203585489, -1.1464713506814637, 1.1909154656429988,
1.1891642016521031, -0.0376332765933176, 0.3272923614086541,
0.1746391428209245, -0.1867085776814394, 0.7257905482933027,
-0.5883165430141887, 2.1831858181971011, -0.1363958830865957,
0.1139313135208096, 1.0667682113591888, 0.0592814605236053,
-0.0956484054836690, -0.8323494636500225, 0.2944108163926404,
-1.3361818579378040, 0.7143245518189522, 1.6235620644462707,
-0.6917757017022868, 0.8579966728282626, 1.2540014216025324,
-1.5937295764474768, -1.4409644319010200, 0.5711476236581780,
-0.3998855777153632, 0.6899973754643451
};
/* ----------------------------------------------------------------------
** Test input data of srcB for blockSize 32
** ------------------------------------------------------------------- */
float32_t srcB_buf_f32[MAX_BLOCKSIZE] =
{
1.7491401329284098, 0.1325982188803279, 0.3252281811989881,
-0.7938091410349637, 0.3149236145048914, -0.5272704888029532,
0.9322666565031119, 1.1646643544607362, -2.0456694357357357,
-0.6443728590041911, 1.7410657940825480, 0.4867684246821860,
1.0488288293660140, 1.4885752747099299, 1.2705014969484090,
-1.8561241921210170, 2.1343209047321410, 1.4358467535865909,
-0.9173023332875400, -1.1060770780029008, 0.8105708062681296,
0.6985430696369063, -0.4015827425012831, 1.2687512030669628,
-0.7836083053674872, 0.2132664971465569, 0.7878984786088954,
0.8966819356782295, -0.1869172943544062, 1.0131816724341454,
0.2484350696132857, 0.0596083377937976
};
/* Reference dot product output */
float32_t refDotProdOut = 5.9273644806352142;
/* ----------------------------------------------------------------------
* Declare Global variables
* ------------------------------------------------------------------- */
float32_t multOutput[MAX_BLOCKSIZE]; /* Intermediate output */
float32_t testOutput; /* Final ouput */
arm_status status; /* Status of the example */
int32_t main(void)
{
uint32_t i; /* Loop counter */
float32_t diff; /* Difference between reference and test outputs */
/* Multiplication of two input buffers */
arm_mult_f32(srcA_buf_f32, srcB_buf_f32, multOutput, MAX_BLOCKSIZE);
/* Accumulate the multiplication output values to
get the dot product of the two inputs */
for(i=0; i< MAX_BLOCKSIZE; i++)
{
arm_add_f32(&testOutput, &multOutput[i], &testOutput, 1);
}
/* absolute value of difference between ref and test */
diff = fabsf(refDotProdOut - testOutput);
/* Comparison of dot product value with reference */
if(diff > DELTA)
{
status = ARM_MATH_TEST_FAILURE;
}
if( status == ARM_MATH_TEST_FAILURE)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_dotproduct_example/GCC/arm_dotproduct_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_dotproduct_example_f32.c
*
* Description: Example code computing dot product of two vectors.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup DotproductExample Dot Product Example
*
* \par Description:
* \par
* Demonstrates the use of the Multiply and Add functions to perform the dot product.
* The dot product of two vectors is obtained by multiplying corresponding elements
* and summing the products.
* \par Algorithm:
* \par
* The two input vectors \c A and \c B with length \c n, are multiplied element-by-element
* and then added to obtain dot product.
* \par
* This is denoted by the following equation:
* <pre> dotProduct = A[0] * B[0] + A[1] * B[1] + ... + A[n-1] * B[n-1]</pre>
*
* \par Block Diagram:
* \par
* \image html dotProduct.gif
*
* \par Variables Description:
* \par
* \li \c srcA_buf_f32 points to first input vector
* \li \c srcB_buf_f32 points to second input vector
* \li \c testOutput stores dot product of the two input vectors.
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_mult_f32()
* - arm_add_f32()
*
* <b> Refer </b>
* \link arm_dotproduct_example_f32.c \endlink
*
*/
/** \example arm_dotproduct_example_f32.c
*/
#include <math.h>
#include "arm_math.h"
/* ----------------------------------------------------------------------
* Defines each of the tests performed
* ------------------------------------------------------------------- */
#define MAX_BLOCKSIZE 32
#define DELTA (0.000001f)
/* ----------------------------------------------------------------------
* Test input data for Floating point Dot Product example for 32-blockSize
* Generated by the MATLAB randn() function
* ------------------------------------------------------------------- */
/* ----------------------------------------------------------------------
** Test input data of srcA for blockSize 32
** ------------------------------------------------------------------- */
float32_t srcA_buf_f32[MAX_BLOCKSIZE] =
{
-0.4325648115282207, -1.6655843782380970, 0.1253323064748307,
0.2876764203585489, -1.1464713506814637, 1.1909154656429988,
1.1891642016521031, -0.0376332765933176, 0.3272923614086541,
0.1746391428209245, -0.1867085776814394, 0.7257905482933027,
-0.5883165430141887, 2.1831858181971011, -0.1363958830865957,
0.1139313135208096, 1.0667682113591888, 0.0592814605236053,
-0.0956484054836690, -0.8323494636500225, 0.2944108163926404,
-1.3361818579378040, 0.7143245518189522, 1.6235620644462707,
-0.6917757017022868, 0.8579966728282626, 1.2540014216025324,
-1.5937295764474768, -1.4409644319010200, 0.5711476236581780,
-0.3998855777153632, 0.6899973754643451
};
/* ----------------------------------------------------------------------
** Test input data of srcB for blockSize 32
** ------------------------------------------------------------------- */
float32_t srcB_buf_f32[MAX_BLOCKSIZE] =
{
1.7491401329284098, 0.1325982188803279, 0.3252281811989881,
-0.7938091410349637, 0.3149236145048914, -0.5272704888029532,
0.9322666565031119, 1.1646643544607362, -2.0456694357357357,
-0.6443728590041911, 1.7410657940825480, 0.4867684246821860,
1.0488288293660140, 1.4885752747099299, 1.2705014969484090,
-1.8561241921210170, 2.1343209047321410, 1.4358467535865909,
-0.9173023332875400, -1.1060770780029008, 0.8105708062681296,
0.6985430696369063, -0.4015827425012831, 1.2687512030669628,
-0.7836083053674872, 0.2132664971465569, 0.7878984786088954,
0.8966819356782295, -0.1869172943544062, 1.0131816724341454,
0.2484350696132857, 0.0596083377937976
};
/* Reference dot product output */
float32_t refDotProdOut = 5.9273644806352142;
/* ----------------------------------------------------------------------
* Declare Global variables
* ------------------------------------------------------------------- */
float32_t multOutput[MAX_BLOCKSIZE]; /* Intermediate output */
float32_t testOutput; /* Final ouput */
arm_status status; /* Status of the example */
int32_t main(void)
{
uint32_t i; /* Loop counter */
float32_t diff; /* Difference between reference and test outputs */
/* Multiplication of two input buffers */
arm_mult_f32(srcA_buf_f32, srcB_buf_f32, multOutput, MAX_BLOCKSIZE);
/* Accumulate the multiplication output values to
get the dot product of the two inputs */
for(i=0; i< MAX_BLOCKSIZE; i++)
{
arm_add_f32(&testOutput, &multOutput[i], &testOutput, 1);
}
/* absolute value of difference between ref and test */
diff = fabsf(refDotProdOut - testOutput);
/* Comparison of dot product value with reference */
if(diff > DELTA)
{
status = ARM_MATH_TEST_FAILURE;
}
if( status == ARM_MATH_TEST_FAILURE)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_fft_bin_example/ARM/arm_fft_bin_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_fft_bin_example_f32.c
*
* Description: Example code demonstrating calculation of Max energy bin of
* frequency domain of input signal.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup FrequencyBin Frequency Bin Example
*
* \par Description
* \par
* Demonstrates the calculation of the maximum energy bin in the frequency
* domain of the input signal with the use of Complex FFT, Complex
* Magnitude, and Maximum functions.
*
* \par Algorithm:
* \par
* The input test signal contains a 10 kHz signal with uniformly distributed white noise.
* Calculating the FFT of the input signal will give us the maximum energy of the
* bin corresponding to the input frequency of 10 kHz.
*
* \par Block Diagram:
* \image html FFTBin.gif "Block Diagram"
* \par
* The figure below shows the time domain signal of 10 kHz signal with
* uniformly distributed white noise, and the next figure shows the input
* in the frequency domain. The bin with maximum energy corresponds to 10 kHz signal.
* \par
* \image html FFTBinInput.gif "Input signal in Time domain"
* \image html FFTBinOutput.gif "Input signal in Frequency domain"
*
* \par Variables Description:
* \par
* \li \c testInput_f32_10khz points to the input data
* \li \c testOutput points to the output data
* \li \c fftSize length of FFT
* \li \c ifftFlag flag for the selection of CFFT/CIFFT
* \li \c doBitReverse Flag for selection of normal order or bit reversed order
* \li \c refIndex reference index value at which maximum energy of bin ocuurs
* \li \c testIndex calculated index value at which maximum energy of bin ocuurs
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_cfft_f32()
* - arm_cmplx_mag_f32()
* - arm_max_f32()
*
* <b> Refer </b>
* \link arm_fft_bin_example_f32.c \endlink
*
*/
/** \example arm_fft_bin_example_f32.c
*/
#include "arm_math.h"
#include "arm_const_structs.h"
#define TEST_LENGTH_SAMPLES 2048
/* -------------------------------------------------------------------
* External Input and Output buffer Declarations for FFT Bin Example
* ------------------------------------------------------------------- */
extern float32_t testInput_f32_10khz[TEST_LENGTH_SAMPLES];
static float32_t testOutput[TEST_LENGTH_SAMPLES/2];
/* ------------------------------------------------------------------
* Global variables for FFT Bin Example
* ------------------------------------------------------------------- */
uint32_t fftSize = 1024;
uint32_t ifftFlag = 0;
uint32_t doBitReverse = 1;
/* Reference index at which max energy of bin ocuurs */
uint32_t refIndex = 213, testIndex = 0;
/* ----------------------------------------------------------------------
* Max magnitude FFT Bin test
* ------------------------------------------------------------------- */
int32_t main(void)
{
arm_status status;
float32_t maxValue;
status = ARM_MATH_SUCCESS;
/* Process the data through the CFFT/CIFFT module */
arm_cfft_f32(&arm_cfft_sR_f32_len1024, testInput_f32_10khz, ifftFlag, doBitReverse);
/* Process the data through the Complex Magnitude Module for
calculating the magnitude at each bin */
arm_cmplx_mag_f32(testInput_f32_10khz, testOutput, fftSize);
/* Calculates maxValue and returns corresponding BIN value */
arm_max_f32(testOutput, fftSize, &maxValue, &testIndex);
if(testIndex != refIndex)
{
status = ARM_MATH_TEST_FAILURE;
}
/* ----------------------------------------------------------------------
** Loop here if the signals fail the PASS check.
** This denotes a test failure
** ------------------------------------------------------------------- */
if( status != ARM_MATH_SUCCESS)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_fft_bin_example/GCC/arm_fft_bin_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_fft_bin_example_f32.c
*
* Description: Example code demonstrating calculation of Max energy bin of
* frequency domain of input signal.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup FrequencyBin Frequency Bin Example
*
* \par Description
* \par
* Demonstrates the calculation of the maximum energy bin in the frequency
* domain of the input signal with the use of Complex FFT, Complex
* Magnitude, and Maximum functions.
*
* \par Algorithm:
* \par
* The input test signal contains a 10 kHz signal with uniformly distributed white noise.
* Calculating the FFT of the input signal will give us the maximum energy of the
* bin corresponding to the input frequency of 10 kHz.
*
* \par Block Diagram:
* \image html FFTBin.gif "Block Diagram"
* \par
* The figure below shows the time domain signal of 10 kHz signal with
* uniformly distributed white noise, and the next figure shows the input
* in the frequency domain. The bin with maximum energy corresponds to 10 kHz signal.
* \par
* \image html FFTBinInput.gif "Input signal in Time domain"
* \image html FFTBinOutput.gif "Input signal in Frequency domain"
*
* \par Variables Description:
* \par
* \li \c testInput_f32_10khz points to the input data
* \li \c testOutput points to the output data
* \li \c fftSize length of FFT
* \li \c ifftFlag flag for the selection of CFFT/CIFFT
* \li \c doBitReverse Flag for selection of normal order or bit reversed order
* \li \c refIndex reference index value at which maximum energy of bin ocuurs
* \li \c testIndex calculated index value at which maximum energy of bin ocuurs
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_cfft_f32()
* - arm_cmplx_mag_f32()
* - arm_max_f32()
*
* <b> Refer </b>
* \link arm_fft_bin_example_f32.c \endlink
*
*/
/** \example arm_fft_bin_example_f32.c
*/
#include "arm_math.h"
#include "arm_const_structs.h"
#define TEST_LENGTH_SAMPLES 2048
/* -------------------------------------------------------------------
* External Input and Output buffer Declarations for FFT Bin Example
* ------------------------------------------------------------------- */
extern float32_t testInput_f32_10khz[TEST_LENGTH_SAMPLES];
static float32_t testOutput[TEST_LENGTH_SAMPLES/2];
/* ------------------------------------------------------------------
* Global variables for FFT Bin Example
* ------------------------------------------------------------------- */
uint32_t fftSize = 1024;
uint32_t ifftFlag = 0;
uint32_t doBitReverse = 1;
/* Reference index at which max energy of bin ocuurs */
uint32_t refIndex = 213, testIndex = 0;
/* ----------------------------------------------------------------------
* Max magnitude FFT Bin test
* ------------------------------------------------------------------- */
int32_t main(void)
{
arm_status status;
float32_t maxValue;
status = ARM_MATH_SUCCESS;
/* Process the data through the CFFT/CIFFT module */
arm_cfft_f32(&arm_cfft_sR_f32_len1024, testInput_f32_10khz, ifftFlag, doBitReverse);
/* Process the data through the Complex Magnitude Module for
calculating the magnitude at each bin */
arm_cmplx_mag_f32(testInput_f32_10khz, testOutput, fftSize);
/* Calculates maxValue and returns corresponding BIN value */
arm_max_f32(testOutput, fftSize, &maxValue, &testIndex);
if(testIndex != refIndex)
{
status = ARM_MATH_TEST_FAILURE;
}
/* ----------------------------------------------------------------------
** Loop here if the signals fail the PASS check.
** This denotes a test failure
** ------------------------------------------------------------------- */
if( status != ARM_MATH_SUCCESS)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_fir_example/ARM/arm_fir_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_fir_example_f32.c
*
* Description: Example code demonstrating how an FIR filter can be used
* as a low pass filter.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup FIRLPF FIR Lowpass Filter Example
*
* \par Description:
* \par
* Removes high frequency signal components from the input using an FIR lowpass filter.
* The example demonstrates how to configure an FIR filter and then pass data through
* it in a block-by-block fashion.
* \image html FIRLPF_signalflow.gif
*
* \par Algorithm:
* \par
* The input signal is a sum of two sine waves: 1 kHz and 15 kHz.
* This is processed by an FIR lowpass filter with cutoff frequency 6 kHz.
* The lowpass filter eliminates the 15 kHz signal leaving only the 1 kHz sine wave at the output.
* \par
* The lowpass filter was designed using MATLAB with a sample rate of 48 kHz and
* a length of 29 points.
* The MATLAB code to generate the filter coefficients is shown below:
* <pre>
* h = fir1(28, 6/24);
* </pre>
* The first argument is the "order" of the filter and is always one less than the desired length.
* The second argument is the normalized cutoff frequency. This is in the range 0 (DC) to 1.0 (Nyquist).
* A 6 kHz cutoff with a Nyquist frequency of 24 kHz lies at a normalized frequency of 6/24 = 0.25.
* The CMSIS FIR filter function requires the coefficients to be in time reversed order.
* <pre>
* fliplr(h)
* </pre>
* The resulting filter coefficients and are shown below.
* Note that the filter is symmetric (a property of linear phase FIR filters)
* and the point of symmetry is sample 14. Thus the filter will have a delay of
* 14 samples for all frequencies.
* \par
* \image html FIRLPF_coeffs.gif
* \par
* The frequency response of the filter is shown next.
* The passband gain of the filter is 1.0 and it reaches 0.5 at the cutoff frequency 6 kHz.
* \par
* \image html FIRLPF_response.gif
* \par
* The input signal is shown below.
* The left hand side shows the signal in the time domain while the right hand side is a frequency domain representation.
* The two sine wave components can be clearly seen.
* \par
* \image html FIRLPF_input.gif
* \par
* The output of the filter is shown below. The 15 kHz component has been eliminated.
* \par
* \image html FIRLPF_output.gif
*
* \par Variables Description:
* \par
* \li \c testInput_f32_1kHz_15kHz points to the input data
* \li \c refOutput points to the reference output data
* \li \c testOutput points to the test output data
* \li \c firStateF32 points to state buffer
* \li \c firCoeffs32 points to coefficient buffer
* \li \c blockSize number of samples processed at a time
* \li \c numBlocks number of frames
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_fir_init_f32()
* - arm_fir_f32()
*
* <b> Refer </b>
* \link arm_fir_example_f32.c \endlink
*
*/
/** \example arm_fir_example_f32.c
*/
/* ----------------------------------------------------------------------
** Include Files
** ------------------------------------------------------------------- */
#include "arm_math.h"
#include "math_helper.h"
/* ----------------------------------------------------------------------
** Macro Defines
** ------------------------------------------------------------------- */
#define TEST_LENGTH_SAMPLES 320
#define SNR_THRESHOLD_F32 140.0f
#define BLOCK_SIZE 32
#define NUM_TAPS 29
/* -------------------------------------------------------------------
* The input signal and reference output (computed with MATLAB)
* are defined externally in arm_fir_lpf_data.c.
* ------------------------------------------------------------------- */
extern float32_t testInput_f32_1kHz_15kHz[TEST_LENGTH_SAMPLES];
extern float32_t refOutput[TEST_LENGTH_SAMPLES];
/* -------------------------------------------------------------------
* Declare Test output buffer
* ------------------------------------------------------------------- */
static float32_t testOutput[TEST_LENGTH_SAMPLES];
/* -------------------------------------------------------------------
* Declare State buffer of size (numTaps + blockSize - 1)
* ------------------------------------------------------------------- */
static float32_t firStateF32[BLOCK_SIZE + NUM_TAPS - 1];
/* ----------------------------------------------------------------------
** FIR Coefficients buffer generated using fir1() MATLAB function.
** fir1(28, 6/24)
** ------------------------------------------------------------------- */
const float32_t firCoeffs32[NUM_TAPS] = {
-0.0018225230f, -0.0015879294f, +0.0000000000f, +0.0036977508f, +0.0080754303f, +0.0085302217f, -0.0000000000f, -0.0173976984f,
-0.0341458607f, -0.0333591565f, +0.0000000000f, +0.0676308395f, +0.1522061835f, +0.2229246956f, +0.2504960933f, +0.2229246956f,
+0.1522061835f, +0.0676308395f, +0.0000000000f, -0.0333591565f, -0.0341458607f, -0.0173976984f, -0.0000000000f, +0.0085302217f,
+0.0080754303f, +0.0036977508f, +0.0000000000f, -0.0015879294f, -0.0018225230f
};
/* ------------------------------------------------------------------
* Global variables for FIR LPF Example
* ------------------------------------------------------------------- */
uint32_t blockSize = BLOCK_SIZE;
uint32_t numBlocks = TEST_LENGTH_SAMPLES/BLOCK_SIZE;
float32_t snr;
/* ----------------------------------------------------------------------
* FIR LPF Example
* ------------------------------------------------------------------- */
int32_t main(void)
{
uint32_t i;
arm_fir_instance_f32 S;
arm_status status;
float32_t *inputF32, *outputF32;
/* Initialize input and output buffer pointers */
inputF32 = &testInput_f32_1kHz_15kHz[0];
outputF32 = &testOutput[0];
/* Call FIR init function to initialize the instance structure. */
arm_fir_init_f32(&S, NUM_TAPS, (float32_t *)&firCoeffs32[0], &firStateF32[0], blockSize);
/* ----------------------------------------------------------------------
** Call the FIR process function for every blockSize samples
** ------------------------------------------------------------------- */
for(i=0; i < numBlocks; i++)
{
arm_fir_f32(&S, inputF32 + (i * blockSize), outputF32 + (i * blockSize), blockSize);
}
/* ----------------------------------------------------------------------
** Compare the generated output against the reference output computed
** in MATLAB.
** ------------------------------------------------------------------- */
snr = arm_snr_f32(&refOutput[0], &testOutput[0], TEST_LENGTH_SAMPLES);
if (snr < SNR_THRESHOLD_F32)
{
status = ARM_MATH_TEST_FAILURE;
}
else
{
status = ARM_MATH_SUCCESS;
}
/* ----------------------------------------------------------------------
** Loop here if the signal does not match the reference output.
** ------------------------------------------------------------------- */
if( status != ARM_MATH_SUCCESS)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_fir_example/ARM/math_helper.h deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_graphic_equalizer_example/ARM/math_helper.h deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_linear_interp_example/ARM/arm_linear_interp_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_linear_interp_example_f32.c
*
* Description: Example code demonstrating usage of sin function
* and uses linear interpolation to get higher precision
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup LinearInterpExample Linear Interpolate Example
*
* <b> CMSIS DSP Software Library -- Linear Interpolate Example </b>
*
* <b> Description </b>
* This example demonstrates usage of linear interpolate modules and fast math modules.
* Method 1 uses fast math sine function to calculate sine values using cubic interpolation and method 2 uses
* linear interpolation function and results are compared to reference output.
* Example shows linear interpolation function can be used to get higher precision compared to fast math sin calculation.
*
* \par Block Diagram:
* \par
* \image html linearInterpExampleMethod1.gif "Method 1: Sine caluclation using fast math"
* \par
* \image html linearInterpExampleMethod2.gif "Method 2: Sine caluclation using interpolation function"
*
* \par Variables Description:
* \par
* \li \c testInputSin_f32 points to the input values for sine calculation
* \li \c testRefSinOutput32_f32 points to the reference values caculated from sin() matlab function
* \li \c testOutput points to output buffer calculation from cubic interpolation
* \li \c testLinIntOutput points to output buffer calculation from linear interpolation
* \li \c snr1 Signal to noise ratio for reference and cubic interpolation output
* \li \c snr2 Signal to noise ratio for reference and linear interpolation output
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_sin_f32()
* - arm_linear_interp_f32()
*
* <b> Refer </b>
* \link arm_linear_interp_example_f32.c \endlink
*
*/
/** \example arm_linear_interp_example_f32.c
*/
#include "arm_math.h"
#include "math_helper.h"
#define SNR_THRESHOLD 90
#define TEST_LENGTH_SAMPLES 10
#define XSPACING (0.00005f)
/* ----------------------------------------------------------------------
* Test input data for F32 SIN function
* Generated by the MATLAB rand() function
* randn('state', 0)
* xi = (((1/4.18318581819710)* randn(blockSize, 1) * 2* pi));
* --------------------------------------------------------------------*/
float32_t testInputSin_f32[TEST_LENGTH_SAMPLES] =
{
-0.649716504673081170, -2.501723745497831200,
0.188250329003310100, 0.432092748487532540,
-1.722010988459680800, 1.788766476323060600,
1.786136060975809500, -0.056525543169408797,
0.491596272728153760, 0.262309671126153390
};
/*------------------------------------------------------------------------------
* Reference out of SIN F32 function for Block Size = 10
* Calculated from sin(testInputSin_f32)
*------------------------------------------------------------------------------*/
float32_t testRefSinOutput32_f32[TEST_LENGTH_SAMPLES] =
{
-0.604960695383043530, -0.597090287967934840,
0.187140422442966500, 0.418772124875992690,
-0.988588831792106880, 0.976338412038794010,
0.976903856413481100, -0.056495446835214236,
0.472033731854734240, 0.259311907228582830
};
/*------------------------------------------------------------------------------
* Method 1: Test out Buffer Calculated from Cubic Interpolation
*------------------------------------------------------------------------------*/
float32_t testOutput[TEST_LENGTH_SAMPLES];
/*------------------------------------------------------------------------------
* Method 2: Test out buffer Calculated from Linear Interpolation
*------------------------------------------------------------------------------*/
float32_t testLinIntOutput[TEST_LENGTH_SAMPLES];
/*------------------------------------------------------------------------------
* External table used for linear interpolation
*------------------------------------------------------------------------------*/
extern float arm_linear_interep_table[188495];
/* ----------------------------------------------------------------------
* Global Variables for caluclating SNR's for Method1 & Method 2
* ------------------------------------------------------------------- */
float32_t snr1;
float32_t snr2;
/* ----------------------------------------------------------------------------
* Calculation of Sine values from Cubic Interpolation and Linear interpolation
* ---------------------------------------------------------------------------- */
int32_t main(void)
{
uint32_t i;
arm_status status;
arm_linear_interp_instance_f32 S = {188495, -3.141592653589793238, XSPACING, &arm_linear_interep_table[0]};
/*------------------------------------------------------------------------------
* Method 1: Test out Calculated from Cubic Interpolation
*------------------------------------------------------------------------------*/
for(i=0; i< TEST_LENGTH_SAMPLES; i++)
{
testOutput[i] = arm_sin_f32(testInputSin_f32[i]);
}
/*------------------------------------------------------------------------------
* Method 2: Test out Calculated from Cubic Interpolation and Linear interpolation
*------------------------------------------------------------------------------*/
for(i=0; i< TEST_LENGTH_SAMPLES; i++)
{
testLinIntOutput[i] = arm_linear_interp_f32(&S, testInputSin_f32[i]);
}
/*------------------------------------------------------------------------------
* SNR calculation for method 1
*------------------------------------------------------------------------------*/
snr1 = arm_snr_f32(testRefSinOutput32_f32, testOutput, 2);
/*------------------------------------------------------------------------------
* SNR calculation for method 2
*------------------------------------------------------------------------------*/
snr2 = arm_snr_f32(testRefSinOutput32_f32, testLinIntOutput, 2);
/*------------------------------------------------------------------------------
* Initialise status depending on SNR calculations
*------------------------------------------------------------------------------*/
if( snr2 > snr1)
{
status = ARM_MATH_SUCCESS;
}
else
{
status = ARM_MATH_TEST_FAILURE;
}
/* ----------------------------------------------------------------------
** Loop here if the signals fail the PASS check.
** This denotes a test failure
** ------------------------------------------------------------------- */
if( status != ARM_MATH_SUCCESS)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_linear_interp_example/ARM/math_helper.h deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_matrix_example/ARM/arm_matrix_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_matrix_example_f32.c
*
* Description: Example code demonstrating least square fit to data
* using matrix functions
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup MatrixExample Matrix Example
*
* \par Description:
* \par
* Demonstrates the use of Matrix Transpose, Matrix Muliplication, and Matrix Inverse
* functions to apply least squares fitting to input data. Least squares fitting is
* the procedure for finding the best-fitting curve that minimizes the sum of the
* squares of the offsets (least square error) from a given set of data.
*
* \par Algorithm:
* \par
* The linear combination of parameters considered is as follows:
* \par
* <code>A * X = B</code>, where \c X is the unknown value and can be estimated
* from \c A & \c B.
* \par
* The least squares estimate \c X is given by the following equation:
* \par
* <code>X = Inverse(A<sup>T</sup> * A) * A<sup>T</sup> * B</code>
*
* \par Block Diagram:
* \par
* \image html matrixExample.gif
*
* \par Variables Description:
* \par
* \li \c A_f32 input matrix in the linear combination equation
* \li \c B_f32 output matrix in the linear combination equation
* \li \c X_f32 unknown matrix estimated using \c A_f32 & \c B_f32 matrices
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_mat_init_f32()
* - arm_mat_trans_f32()
* - arm_mat_mult_f32()
* - arm_mat_inverse_f32()
*
* <b> Refer </b>
* \link arm_matrix_example_f32.c \endlink
*
*/
/** \example arm_matrix_example_f32.c
*/
#include "arm_math.h"
#include "math_helper.h"
#define SNR_THRESHOLD 90
/* --------------------------------------------------------------------------------
* Test input data(Cycles) taken from FIR Q15 module for differant cases of blockSize
* and tapSize
* --------------------------------------------------------------------------------- */
const float32_t B_f32[4] =
{
782.0, 7577.0, 470.0, 4505.0
};
/* --------------------------------------------------------------------------------
* Formula to fit is C1 + C2 * numTaps + C3 * blockSize + C4 * numTaps * blockSize
* -------------------------------------------------------------------------------- */
const float32_t A_f32[16] =
{
/* Const, numTaps, blockSize, numTaps*blockSize */
1.0, 32.0, 4.0, 128.0,
1.0, 32.0, 64.0, 2048.0,
1.0, 16.0, 4.0, 64.0,
1.0, 16.0, 64.0, 1024.0,
};
/* ----------------------------------------------------------------------
* Temporary buffers for storing intermediate values
* ------------------------------------------------------------------- */
/* Transpose of A Buffer */
float32_t AT_f32[16];
/* (Transpose of A * A) Buffer */
float32_t ATMA_f32[16];
/* Inverse(Transpose of A * A) Buffer */
float32_t ATMAI_f32[16];
/* Test Output Buffer */
float32_t X_f32[4];
/* ----------------------------------------------------------------------
* Reference ouput buffer C1, C2, C3 and C4 taken from MATLAB
* ------------------------------------------------------------------- */
const float32_t xRef_f32[4] = {73.0, 8.0, 21.25, 2.875};
float32_t snr;
/* ----------------------------------------------------------------------
* Max magnitude FFT Bin test
* ------------------------------------------------------------------- */
int32_t main(void)
{
arm_matrix_instance_f32 A; /* Matrix A Instance */
arm_matrix_instance_f32 AT; /* Matrix AT(A transpose) instance */
arm_matrix_instance_f32 ATMA; /* Matrix ATMA( AT multiply with A) instance */
arm_matrix_instance_f32 ATMAI; /* Matrix ATMAI(Inverse of ATMA) instance */
arm_matrix_instance_f32 B; /* Matrix B instance */
arm_matrix_instance_f32 X; /* Matrix X(Unknown Matrix) instance */
uint32_t srcRows, srcColumns; /* Temporary variables */
arm_status status;
/* Initialise A Matrix Instance with numRows, numCols and data array(A_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&A, srcRows, srcColumns, (float32_t *)A_f32);
/* Initialise Matrix Instance AT with numRows, numCols and data array(AT_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&AT, srcRows, srcColumns, AT_f32);
/* calculation of A transpose */
status = arm_mat_trans_f32(&A, &AT);
/* Initialise ATMA Matrix Instance with numRows, numCols and data array(ATMA_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&ATMA, srcRows, srcColumns, ATMA_f32);
/* calculation of AT Multiply with A */
status = arm_mat_mult_f32(&AT, &A, &ATMA);
/* Initialise ATMAI Matrix Instance with numRows, numCols and data array(ATMAI_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&ATMAI, srcRows, srcColumns, ATMAI_f32);
/* calculation of Inverse((Transpose(A) * A) */
status = arm_mat_inverse_f32(&ATMA, &ATMAI);
/* calculation of (Inverse((Transpose(A) * A)) * Transpose(A)) */
status = arm_mat_mult_f32(&ATMAI, &AT, &ATMA);
/* Initialise B Matrix Instance with numRows, numCols and data array(B_f32) */
srcRows = 4;
srcColumns = 1;
arm_mat_init_f32(&B, srcRows, srcColumns, (float32_t *)B_f32);
/* Initialise X Matrix Instance with numRows, numCols and data array(X_f32) */
srcRows = 4;
srcColumns = 1;
arm_mat_init_f32(&X, srcRows, srcColumns, X_f32);
/* calculation ((Inverse((Transpose(A) * A)) * Transpose(A)) * B) */
status = arm_mat_mult_f32(&ATMA, &B, &X);
/* Comparison of reference with test output */
snr = arm_snr_f32((float32_t *)xRef_f32, X_f32, 4);
/*------------------------------------------------------------------------------
* Initialise status depending on SNR calculations
*------------------------------------------------------------------------------*/
if( snr > SNR_THRESHOLD)
{
status = ARM_MATH_SUCCESS;
}
else
{
status = ARM_MATH_TEST_FAILURE;
}
/* ----------------------------------------------------------------------
** Loop here if the signals fail the PASS check.
** This denotes a test failure
** ------------------------------------------------------------------- */
if( status != ARM_MATH_SUCCESS)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_matrix_example/ARM/math_helper.h deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_signal_converge_example/ARM/math_helper.h deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_sin_cos_example/ARM/arm_sin_cos_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 12. March 2014
* $Revision: V1.4.3
*
* Project: CMSIS DSP Library
* Title: arm_sin_cos_example_f32.c
*
* Description: Example code demonstrating sin and cos calculation of input signal.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup SinCosExample SineCosine Example
*
* \par Description:
* \par
* Demonstrates the Pythagorean trignometric identity with the use of Cosine, Sine, Vector
* Multiplication, and Vector Addition functions.
*
* \par Algorithm:
* \par
* Mathematically, the Pythagorean trignometric identity is defined by the following equation:
* <pre>sin(x) * sin(x) + cos(x) * cos(x) = 1</pre>
* where \c x is the angle in radians.
*
* \par Block Diagram:
* \par
* \image html sinCos.gif
*
* \par Variables Description:
* \par
* \li \c testInput_f32 array of input angle in radians
* \li \c testOutput stores sum of the squares of sine and cosine values of input angle
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_cos_f32()
* - arm_sin_f32()
* - arm_mult_f32()
* - arm_add_f32()
*
* <b> Refer </b>
* \link arm_sin_cos_example_f32.c \endlink
*
*/
/** \example arm_sin_cos_example_f32.c
*/
#include <math.h>
#include "arm_math.h"
/* ----------------------------------------------------------------------
* Defines each of the tests performed
* ------------------------------------------------------------------- */
#define MAX_BLOCKSIZE 32
#define DELTA (0.0001f)
/* ----------------------------------------------------------------------
* Test input data for Floating point sin_cos example for 32-blockSize
* Generated by the MATLAB randn() function
* ------------------------------------------------------------------- */
const float32_t testInput_f32[MAX_BLOCKSIZE] =
{
-1.244916875853235400, -4.793533929171324800, 0.360705030233248850, 0.827929644170887320, -3.299532218312426900, 3.427441903227623800, 3.422401784294607700, -0.108308165334010680,
0.941943896490312180, 0.502609575000365850, -0.537345278736373500, 2.088817392965764500, -1.693168684143455700, 6.283185307179590700, -0.392545884746175080, 0.327893095115825040,
3.070147440456292300, 0.170611405884662230, -0.275275082396073010, -2.395492805446796300, 0.847311163536506600, -3.845517018083148800, 2.055818378415868300, 4.672594161978930800,
-1.990923030266425800, 2.469305197656249500, 3.609002606064021000, -4.586736582331667500, -4.147080139136136300, 1.643756718868359500, -1.150866392366494800, 1.985805026477433800
};
const float32_t testRefOutput_f32 = 1.000000000;
/* ----------------------------------------------------------------------
* Declare Global variables
* ------------------------------------------------------------------- */
uint32_t blockSize = 32;
float32_t testOutput;
float32_t cosOutput;
float32_t sinOutput;
float32_t cosSquareOutput;
float32_t sinSquareOutput;
/* ----------------------------------------------------------------------
* Max magnitude FFT Bin test
* ------------------------------------------------------------------- */
arm_status status;
int32_t main(void)
{
float32_t diff;
uint32_t i;
for(i=0; i< blockSize; i++)
{
cosOutput = arm_cos_f32(testInput_f32[i]);
sinOutput = arm_sin_f32(testInput_f32[i]);
arm_mult_f32(&cosOutput, &cosOutput, &cosSquareOutput, 1);
arm_mult_f32(&sinOutput, &sinOutput, &sinSquareOutput, 1);
arm_add_f32(&cosSquareOutput, &sinSquareOutput, &testOutput, 1);
/* absolute value of difference between ref and test */
diff = fabsf(testRefOutput_f32 - testOutput);
/* Comparison of sin_cos value with reference */
if(diff > DELTA)
{
status = ARM_MATH_TEST_FAILURE;
}
if( status == ARM_MATH_TEST_FAILURE)
{
while(1);
}
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Examples/arm_variance_example/ARM/arm_variance_example_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_variance_example_f32.c
*
* Description: Example code demonstrating variance calculation of input sequence.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup VarianceExample Variance Example
*
* \par Description:
* \par
* Demonstrates the use of Basic Math and Support Functions to calculate the variance of an
* input sequence with N samples. Uniformly distributed white noise is taken as input.
*
* \par Algorithm:
* \par
* The variance of a sequence is the mean of the squared deviation of the sequence from its mean.
* \par
* This is denoted by the following equation:
* <pre> variance = ((x[0] - x') * (x[0] - x') + (x[1] - x') * (x[1] - x') + ... + * (x[n-1] - x') * (x[n-1] - x')) / (N-1)</pre>
* where, <code>x[n]</code> is the input sequence, <code>N</code> is the number of input samples, and
* <code>x'</code> is the mean value of the input sequence, <code>x[n]</code>.
* \par
* The mean value <code>x'</code> is defined as:
* <pre> x' = (x[0] + x[1] + ... + x[n-1]) / N</pre>
*
* \par Block Diagram:
* \par
* \image html Variance.gif
*
*
* \par Variables Description:
* \par
* \li \c testInput_f32 points to the input data
* \li \c wire1, \c wir2, \c wire3 temporary buffers
* \li \c blockSize number of samples processed at a time
* \li \c refVarianceOut reference variance value
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_dot_prod_f32()
* - arm_mult_f32()
* - arm_sub_f32()
* - arm_fill_f32()
* - arm_copy_f32()
*
* <b> Refer </b>
* \link arm_variance_example_f32.c \endlink
*
*/
/** \example arm_variance_example_f32.c
*/
#include <math.h>
#include "arm_math.h"
/* ----------------------------------------------------------------------
* Defines each of the tests performed
* ------------------------------------------------------------------- */
#define MAX_BLOCKSIZE 32
#define DELTA (0.000001f)
/* ----------------------------------------------------------------------
* Declare I/O buffers
* ------------------------------------------------------------------- */
float32_t wire1[MAX_BLOCKSIZE];
float32_t wire2[MAX_BLOCKSIZE];
float32_t wire3[MAX_BLOCKSIZE];
/* ----------------------------------------------------------------------
* Test input data for Floating point Variance example for 32-blockSize
* Generated by the MATLAB randn() function
* ------------------------------------------------------------------- */
float32_t testInput_f32[32] =
{
-0.432564811528221, -1.665584378238097, 0.125332306474831, 0.287676420358549,
-1.146471350681464, 1.190915465642999, 1.189164201652103, -0.037633276593318,
0.327292361408654, 0.174639142820925, -0.186708577681439, 0.725790548293303,
-0.588316543014189, 2.183185818197101, -0.136395883086596, 0.113931313520810,
1.066768211359189, 0.059281460523605, -0.095648405483669, -0.832349463650022,
0.294410816392640, -1.336181857937804, 0.714324551818952, 1.623562064446271,
-0.691775701702287, 0.857996672828263, 1.254001421602532, -1.593729576447477,
-1.440964431901020, 0.571147623658178, -0.399885577715363, 0.689997375464345
};
/* ----------------------------------------------------------------------
* Declare Global variables
* ------------------------------------------------------------------- */
uint32_t blockSize = 32;
float32_t refVarianceOut = 0.903941793931839;
/* ----------------------------------------------------------------------
* Variance calculation test
* ------------------------------------------------------------------- */
int32_t main(void)
{
arm_status status;
float32_t mean, oneByBlockSize;
float32_t variance;
float32_t diff;
status = ARM_MATH_SUCCESS;
/* Calculation of mean value of input */
/* x' = 1/blockSize * (x(0)* 1 + x(1) * 1 + ... + x(n-1) * 1) */
/* Fill wire1 buffer with 1.0 value */
arm_fill_f32(1.0, wire1, blockSize);
/* Calculate the dot product of wire1 and wire2 */
/* (x(0)* 1 + x(1) * 1 + ...+ x(n-1) * 1) */
arm_dot_prod_f32(testInput_f32, wire1, blockSize, &mean);
/* Calculation of 1/blockSize */
oneByBlockSize = 1.0 / (blockSize);
/* 1/blockSize * (x(0)* 1 + x(1) * 1 + ... + x(n-1) * 1) */
arm_mult_f32(&mean, &oneByBlockSize, &mean, 1);
/* Calculation of variance value of input */
/* (1/blockSize) * (x(0) - x') * (x(0) - x') + (x(1) - x') * (x(1) - x') + ... + (x(n-1) - x') * (x(n-1) - x') */
/* Fill wire2 with mean value x' */
arm_fill_f32(mean, wire2, blockSize);
/* wire3 contains (x-x') */
arm_sub_f32(testInput_f32, wire2, wire3, blockSize);
/* wire2 contains (x-x') */
arm_copy_f32(wire3, wire2, blockSize);
/* (x(0) - x') * (x(0) - x') + (x(1) - x') * (x(1) - x') + ... + (x(n-1) - x') * (x(n-1) - x') */
arm_dot_prod_f32(wire2, wire3, blockSize, &variance);
/* Calculation of 1/blockSize */
oneByBlockSize = 1.0 / (blockSize - 1);
/* Calculation of variance */
arm_mult_f32(&variance, &oneByBlockSize, &variance, 1);
/* absolute value of difference between ref and test */
diff = fabsf(refVarianceOut - variance);
/* Comparison of variance value with reference */
if(diff > DELTA)
{
status = ARM_MATH_TEST_FAILURE;
}
if( status != ARM_MATH_SUCCESS)
{
while(1);
}
while(1); /* main function does not return */
}
/** \endlink */
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_abs_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_abs_f32.c
*
* Description: Vector absolute value.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* ---------------------------------------------------------------------------- */
#include "arm_math.h"
#include <math.h>
/**
* @ingroup groupMath
*/
/**
* @defgroup BasicAbs Vector Absolute Value
*
* Computes the absolute value of a vector on an element-by-element basis.
*
* <pre>
* pDst[n] = abs(pSrc[n]), 0 <= n < blockSize.
* </pre>
*
* The functions support in-place computation allowing the source and
* destination pointers to reference the same memory buffer.
* There are separate functions for floating-point, Q7, Q15, and Q31 data types.
*/
/**
* @addtogroup BasicAbs
* @{
*/
/**
* @brief Floating-point vector absolute value.
* @param[in] *pSrc points to the input buffer
* @param[out] *pDst points to the output buffer
* @param[in] blockSize number of samples in each vector
* @return none.
*/
void arm_abs_f32(
float32_t * pSrc,
float32_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
float32_t in1, in2, in3, in4; /* temporary variables */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = |A| */
/* Calculate absolute and then store the results in the destination buffer. */
/* read sample from source */
in1 = *pSrc;
in2 = *(pSrc + 1);
in3 = *(pSrc + 2);
/* find absolute value */
in1 = fabsf(in1);
/* read sample from source */
in4 = *(pSrc + 3);
/* find absolute value */
in2 = fabsf(in2);
/* read sample from source */
*pDst = in1;
/* find absolute value */
in3 = fabsf(in3);
/* find absolute value */
in4 = fabsf(in4);
/* store result to destination */
*(pDst + 1) = in2;
/* store result to destination */
*(pDst + 2) = in3;
/* store result to destination */
*(pDst + 3) = in4;
/* Update source pointer to process next sampels */
pSrc += 4u;
/* Update destination pointer to process next sampels */
pDst += 4u;
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = |A| */
/* Calculate absolute and then store the results in the destination buffer. */
*pDst++ = fabsf(*pSrc++);
/* Decrement the loop counter */
blkCnt--;
}
}
/**
* @} end of BasicAbs group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_abs_q15.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_abs_q15.c
*
* Description: Q15 vector absolute value.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup BasicAbs
* @{
*/
/**
* @brief Q15 vector absolute value.
* @param[in] *pSrc points to the input buffer
* @param[out] *pDst points to the output buffer
* @param[in] blockSize number of samples in each vector
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The function uses saturating arithmetic.
* The Q15 value -1 (0x8000) will be saturated to the maximum allowable positive value 0x7FFF.
*/
void arm_abs_q15(
q15_t * pSrc,
q15_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
__SIMD32_TYPE *simd;
/* Run the below code for Cortex-M4 and Cortex-M3 */
q15_t in1; /* Input value1 */
q15_t in2; /* Input value2 */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
simd = __SIMD32_CONST(pDst);
while(blkCnt > 0u)
{
/* C = |A| */
/* Read two inputs */
in1 = *pSrc++;
in2 = *pSrc++;
/* Store the Absolute result in the destination buffer by packing the two values, in a single cycle */
#ifndef ARM_MATH_BIG_ENDIAN
*simd++ =
__PKHBT(((in1 > 0) ? in1 : (q15_t)__QSUB16(0, in1)),
((in2 > 0) ? in2 : (q15_t)__QSUB16(0, in2)), 16);
#else
*simd++ =
__PKHBT(((in2 > 0) ? in2 : (q15_t)__QSUB16(0, in2)),
((in1 > 0) ? in1 : (q15_t)__QSUB16(0, in1)), 16);
#endif /* #ifndef ARM_MATH_BIG_ENDIAN */
in1 = *pSrc++;
in2 = *pSrc++;
#ifndef ARM_MATH_BIG_ENDIAN
*simd++ =
__PKHBT(((in1 > 0) ? in1 : (q15_t)__QSUB16(0, in1)),
((in2 > 0) ? in2 : (q15_t)__QSUB16(0, in2)), 16);
#else
*simd++ =
__PKHBT(((in2 > 0) ? in2 : (q15_t)__QSUB16(0, in2)),
((in1 > 0) ? in1 : (q15_t)__QSUB16(0, in1)), 16);
#endif /* #ifndef ARM_MATH_BIG_ENDIAN */
/* Decrement the loop counter */
blkCnt--;
}
pDst = (q15_t *)simd;
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
while(blkCnt > 0u)
{
/* C = |A| */
/* Read the input */
in1 = *pSrc++;
/* Calculate absolute value of input and then store the result in the destination buffer. */
*pDst++ = (in1 > 0) ? in1 : (q15_t)__QSUB16(0, in1);
/* Decrement the loop counter */
blkCnt--;
}
#else
/* Run the below code for Cortex-M0 */
q15_t in; /* Temporary input variable */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
while(blkCnt > 0u)
{
/* C = |A| */
/* Read the input */
in = *pSrc++;
/* Calculate absolute value of input and then store the result in the destination buffer. */
*pDst++ = (in > 0) ? in : ((in == (q15_t) 0x8000) ? 0x7fff : -in);
/* Decrement the loop counter */
blkCnt--;
}
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
}
/**
* @} end of BasicAbs group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_abs_q31.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_abs_q31.c
*
* Description: Q31 vector absolute value.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup BasicAbs
* @{
*/
/**
* @brief Q31 vector absolute value.
* @param[in] *pSrc points to the input buffer
* @param[out] *pDst points to the output buffer
* @param[in] blockSize number of samples in each vector
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The function uses saturating arithmetic.
* The Q31 value -1 (0x80000000) will be saturated to the maximum allowable positive value 0x7FFFFFFF.
*/
void arm_abs_q31(
q31_t * pSrc,
q31_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
q31_t in; /* Input value */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t in1, in2, in3, in4;
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = |A| */
/* Calculate absolute of input (if -1 then saturated to 0x7fffffff) and then store the results in the destination buffer. */
in1 = *pSrc++;
in2 = *pSrc++;
in3 = *pSrc++;
in4 = *pSrc++;
*pDst++ = (in1 > 0) ? in1 : (q31_t)__QSUB(0, in1);
*pDst++ = (in2 > 0) ? in2 : (q31_t)__QSUB(0, in2);
*pDst++ = (in3 > 0) ? in3 : (q31_t)__QSUB(0, in3);
*pDst++ = (in4 > 0) ? in4 : (q31_t)__QSUB(0, in4);
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = |A| */
/* Calculate absolute value of the input (if -1 then saturated to 0x7fffffff) and then store the results in the destination buffer. */
in = *pSrc++;
*pDst++ = (in > 0) ? in : ((in == INT32_MIN) ? INT32_MAX : -in);
/* Decrement the loop counter */
blkCnt--;
}
}
/**
* @} end of BasicAbs group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_abs_q7.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_abs_q7.c
*
* Description: Q7 vector absolute value.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup BasicAbs
* @{
*/
/**
* @brief Q7 vector absolute value.
* @param[in] *pSrc points to the input buffer
* @param[out] *pDst points to the output buffer
* @param[in] blockSize number of samples in each vector
* @return none.
*
* \par Conditions for optimum performance
* Input and output buffers should be aligned by 32-bit
*
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The function uses saturating arithmetic.
* The Q7 value -1 (0x80) will be saturated to the maximum allowable positive value 0x7F.
*/
void arm_abs_q7(
q7_t * pSrc,
q7_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
q7_t in; /* Input value1 */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t in1, in2, in3, in4; /* temporary input variables */
q31_t out1, out2, out3, out4; /* temporary output variables */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = |A| */
/* Read inputs */
in1 = (q31_t) * pSrc;
in2 = (q31_t) * (pSrc + 1);
in3 = (q31_t) * (pSrc + 2);
/* find absolute value */
out1 = (in1 > 0) ? in1 : (q31_t)__QSUB8(0, in1);
/* read input */
in4 = (q31_t) * (pSrc + 3);
/* find absolute value */
out2 = (in2 > 0) ? in2 : (q31_t)__QSUB8(0, in2);
/* store result to destination */
*pDst = (q7_t) out1;
/* find absolute value */
out3 = (in3 > 0) ? in3 : (q31_t)__QSUB8(0, in3);
/* find absolute value */
out4 = (in4 > 0) ? in4 : (q31_t)__QSUB8(0, in4);
/* store result to destination */
*(pDst + 1) = (q7_t) out2;
/* store result to destination */
*(pDst + 2) = (q7_t) out3;
/* store result to destination */
*(pDst + 3) = (q7_t) out4;
/* update pointers to process next samples */
pSrc += 4u;
pDst += 4u;
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
blkCnt = blockSize;
#endif /* #define ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = |A| */
/* Read the input */
in = *pSrc++;
/* Store the Absolute result in the destination buffer */
*pDst++ = (in > 0) ? in : ((in == (q7_t) 0x80) ? 0x7f : -in);
/* Decrement the loop counter */
blkCnt--;
}
}
/**
* @} end of BasicAbs group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_add_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_add_f32.c
*
* Description: Floating-point vector addition.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* ---------------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @defgroup BasicAdd Vector Addition
*
* Element-by-element addition of two vectors.
*
* <pre>
* pDst[n] = pSrcA[n] + pSrcB[n], 0 <= n < blockSize.
* </pre>
*
* There are separate functions for floating-point, Q7, Q15, and Q31 data types.
*/
/**
* @addtogroup BasicAdd
* @{
*/
/**
* @brief Floating-point vector addition.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[out] *pDst points to the output vector
* @param[in] blockSize number of samples in each vector
* @return none.
*/
void arm_add_f32(
float32_t * pSrcA,
float32_t * pSrcB,
float32_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
float32_t inA1, inA2, inA3, inA4; /* temporary input variabels */
float32_t inB1, inB2, inB3, inB4; /* temporary input variables */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
/* read four inputs from sourceA and four inputs from sourceB */
inA1 = *pSrcA;
inB1 = *pSrcB;
inA2 = *(pSrcA + 1);
inB2 = *(pSrcB + 1);
inA3 = *(pSrcA + 2);
inB3 = *(pSrcB + 2);
inA4 = *(pSrcA + 3);
inB4 = *(pSrcB + 3);
/* C = A + B */
/* add and store result to destination */
*pDst = inA1 + inB1;
*(pDst + 1) = inA2 + inB2;
*(pDst + 2) = inA3 + inB3;
*(pDst + 3) = inA4 + inB4;
/* update pointers to process next samples */
pSrcA += 4u;
pSrcB += 4u;
pDst += 4u;
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*pDst++ = (*pSrcA++) + (*pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
}
/**
* @} end of BasicAdd group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_add_q15.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_add_q15.c
*
* Description: Q15 vector addition
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup BasicAdd
* @{
*/
/**
* @brief Q15 vector addition.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[out] *pDst points to the output vector
* @param[in] blockSize number of samples in each vector
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The function uses saturating arithmetic.
* Results outside of the allowable Q15 range [0x8000 0x7FFF] will be saturated.
*/
void arm_add_q15(
q15_t * pSrcA,
q15_t * pSrcB,
q15_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t inA1, inA2, inB1, inB2;
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
inA1 = *__SIMD32(pSrcA)++;
inA2 = *__SIMD32(pSrcA)++;
inB1 = *__SIMD32(pSrcB)++;
inB2 = *__SIMD32(pSrcB)++;
*__SIMD32(pDst)++ = __QADD16(inA1, inB1);
*__SIMD32(pDst)++ = __QADD16(inA2, inB2);
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*pDst++ = (q15_t) __QADD16(*pSrcA++, *pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*pDst++ = (q15_t) __SSAT(((q31_t) * pSrcA++ + *pSrcB++), 16);
/* Decrement the loop counter */
blkCnt--;
}
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
}
/**
* @} end of BasicAdd group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_add_q31.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_add_q31.c
*
* Description: Q31 vector addition.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup BasicAdd
* @{
*/
/**
* @brief Q31 vector addition.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[out] *pDst points to the output vector
* @param[in] blockSize number of samples in each vector
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The function uses saturating arithmetic.
* Results outside of the allowable Q31 range[0x80000000 0x7FFFFFFF] will be saturated.
*/
void arm_add_q31(
q31_t * pSrcA,
q31_t * pSrcB,
q31_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t inA1, inA2, inA3, inA4;
q31_t inB1, inB2, inB3, inB4;
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
inA1 = *pSrcA++;
inA2 = *pSrcA++;
inB1 = *pSrcB++;
inB2 = *pSrcB++;
inA3 = *pSrcA++;
inA4 = *pSrcA++;
inB3 = *pSrcB++;
inB4 = *pSrcB++;
*pDst++ = __QADD(inA1, inB1);
*pDst++ = __QADD(inA2, inB2);
*pDst++ = __QADD(inA3, inB3);
*pDst++ = __QADD(inA4, inB4);
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*pDst++ = __QADD(*pSrcA++, *pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*pDst++ = (q31_t) clip_q63_to_q31((q63_t) * pSrcA++ + *pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
}
/**
* @} end of BasicAdd group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_add_q7.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_add_q7.c
*
* Description: Q7 vector addition.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup BasicAdd
* @{
*/
/**
* @brief Q7 vector addition.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[out] *pDst points to the output vector
* @param[in] blockSize number of samples in each vector
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The function uses saturating arithmetic.
* Results outside of the allowable Q7 range [0x80 0x7F] will be saturated.
*/
void arm_add_q7(
q7_t * pSrcA,
q7_t * pSrcB,
q7_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*__SIMD32(pDst)++ = __QADD8(*__SIMD32(pSrcA)++, *__SIMD32(pSrcB)++);
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*pDst++ = (q7_t) __SSAT(*pSrcA++ + *pSrcB++, 8);
/* Decrement the loop counter */
blkCnt--;
}
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
while(blkCnt > 0u)
{
/* C = A + B */
/* Add and then store the results in the destination buffer. */
*pDst++ = (q7_t) __SSAT((q15_t) * pSrcA++ + *pSrcB++, 8);
/* Decrement the loop counter */
blkCnt--;
}
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
}
/**
* @} end of BasicAdd group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_dot_prod_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_dot_prod_f32.c
*
* Description: Floating-point dot product.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* ---------------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @defgroup dot_prod Vector Dot Product
*
* Computes the dot product of two vectors.
* The vectors are multiplied element-by-element and then summed.
*
* <pre>
* sum = pSrcA[0]*pSrcB[0] + pSrcA[1]*pSrcB[1] + ... + pSrcA[blockSize-1]*pSrcB[blockSize-1]
* </pre>
*
* There are separate functions for floating-point, Q7, Q15, and Q31 data types.
*/
/**
* @addtogroup dot_prod
* @{
*/
/**
* @brief Dot product of floating-point vectors.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[in] blockSize number of samples in each vector
* @param[out] *result output result returned here
* @return none.
*/
void arm_dot_prod_f32(
float32_t * pSrcA,
float32_t * pSrcB,
uint32_t blockSize,
float32_t * result)
{
float32_t sum = 0.0f; /* Temporary result storage */
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Calculate dot product and then store the result in a temporary buffer */
sum += (*pSrcA++) * (*pSrcB++);
sum += (*pSrcA++) * (*pSrcB++);
sum += (*pSrcA++) * (*pSrcB++);
sum += (*pSrcA++) * (*pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Calculate dot product and then store the result in a temporary buffer. */
sum += (*pSrcA++) * (*pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
/* Store the result back in the destination buffer */
*result = sum;
}
/**
* @} end of dot_prod group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_dot_prod_q15.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_dot_prod_q15.c
*
* Description: Q15 dot product.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup dot_prod
* @{
*/
/**
* @brief Dot product of Q15 vectors.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[in] blockSize number of samples in each vector
* @param[out] *result output result returned here
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The intermediate multiplications are in 1.15 x 1.15 = 2.30 format and these
* results are added to a 64-bit accumulator in 34.30 format.
* Nonsaturating additions are used and given that there are 33 guard bits in the accumulator
* there is no risk of overflow.
* The return result is in 34.30 format.
*/
void arm_dot_prod_q15(
q15_t * pSrcA,
q15_t * pSrcB,
uint32_t blockSize,
q63_t * result)
{
q63_t sum = 0; /* Temporary result storage */
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Calculate dot product and then store the result in a temporary buffer. */
sum = __SMLALD(*__SIMD32(pSrcA)++, *__SIMD32(pSrcB)++, sum);
sum = __SMLALD(*__SIMD32(pSrcA)++, *__SIMD32(pSrcB)++, sum);
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Calculate dot product and then store the results in a temporary buffer. */
sum = __SMLALD(*pSrcA++, *pSrcB++, sum);
/* Decrement the loop counter */
blkCnt--;
}
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Calculate dot product and then store the results in a temporary buffer. */
sum += (q63_t) ((q31_t) * pSrcA++ * *pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
/* Store the result in the destination buffer in 34.30 format */
*result = sum;
}
/**
* @} end of dot_prod group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_dot_prod_q31.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_dot_prod_q31.c
*
* Description: Q31 dot product.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup dot_prod
* @{
*/
/**
* @brief Dot product of Q31 vectors.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[in] blockSize number of samples in each vector
* @param[out] *result output result returned here
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The intermediate multiplications are in 1.31 x 1.31 = 2.62 format and these
* are truncated to 2.48 format by discarding the lower 14 bits.
* The 2.48 result is then added without saturation to a 64-bit accumulator in 16.48 format.
* There are 15 guard bits in the accumulator and there is no risk of overflow as long as
* the length of the vectors is less than 2^16 elements.
* The return result is in 16.48 format.
*/
void arm_dot_prod_q31(
q31_t * pSrcA,
q31_t * pSrcB,
uint32_t blockSize,
q63_t * result)
{
q63_t sum = 0; /* Temporary result storage */
uint32_t blkCnt; /* loop counter */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t inA1, inA2, inA3, inA4;
q31_t inB1, inB2, inB3, inB4;
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Calculate dot product and then store the result in a temporary buffer. */
inA1 = *pSrcA++;
inA2 = *pSrcA++;
inA3 = *pSrcA++;
inA4 = *pSrcA++;
inB1 = *pSrcB++;
inB2 = *pSrcB++;
inB3 = *pSrcB++;
inB4 = *pSrcB++;
sum += ((q63_t) inA1 * inB1) >> 14u;
sum += ((q63_t) inA2 * inB2) >> 14u;
sum += ((q63_t) inA3 * inB3) >> 14u;
sum += ((q63_t) inA4 * inB4) >> 14u;
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Calculate dot product and then store the result in a temporary buffer. */
sum += ((q63_t) * pSrcA++ * *pSrcB++) >> 14u;
/* Decrement the loop counter */
blkCnt--;
}
/* Store the result in the destination buffer in 16.48 format */
*result = sum;
}
/**
* @} end of dot_prod group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_dot_prod_q7.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_dot_prod_q7.c
*
* Description: Q7 dot product.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup dot_prod
* @{
*/
/**
* @brief Dot product of Q7 vectors.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[in] blockSize number of samples in each vector
* @param[out] *result output result returned here
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The intermediate multiplications are in 1.7 x 1.7 = 2.14 format and these
* results are added to an accumulator in 18.14 format.
* Nonsaturating additions are used and there is no danger of wrap around as long as
* the vectors are less than 2^18 elements long.
* The return result is in 18.14 format.
*/
void arm_dot_prod_q7(
q7_t * pSrcA,
q7_t * pSrcB,
uint32_t blockSize,
q31_t * result)
{
uint32_t blkCnt; /* loop counter */
q31_t sum = 0; /* Temporary variables to store output */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t input1, input2; /* Temporary variables to store input */
q31_t inA1, inA2, inB1, inB2; /* Temporary variables to store input */
/*loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* read 4 samples at a time from sourceA */
input1 = *__SIMD32(pSrcA)++;
/* read 4 samples at a time from sourceB */
input2 = *__SIMD32(pSrcB)++;
/* extract two q7_t samples to q15_t samples */
inA1 = __SXTB16(__ROR(input1, 8));
/* extract reminaing two samples */
inA2 = __SXTB16(input1);
/* extract two q7_t samples to q15_t samples */
inB1 = __SXTB16(__ROR(input2, 8));
/* extract reminaing two samples */
inB2 = __SXTB16(input2);
/* multiply and accumulate two samples at a time */
sum = __SMLAD(inA1, inB1, sum);
sum = __SMLAD(inA2, inB2, sum);
/* Decrement the loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Dot product and then store the results in a temporary buffer. */
sum = __SMLAD(*pSrcA++, *pSrcB++, sum);
/* Decrement the loop counter */
blkCnt--;
}
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
while(blkCnt > 0u)
{
/* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
/* Dot product and then store the results in a temporary buffer. */
sum += (q31_t) ((q15_t) * pSrcA++ * *pSrcB++);
/* Decrement the loop counter */
blkCnt--;
}
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
/* Store the result in the destination buffer in 18.14 format */
*result = sum;
}
/**
* @} end of dot_prod group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_mult_f32.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. March 2015
* $Revision: V.1.4.5
*
* Project: CMSIS DSP Library
* Title: arm_mult_f32.c
*
* Description: Floating-point vector multiplication.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @defgroup BasicMult Vector Multiplication
*
* Element-by-element multiplication of two vectors.
*
* <pre>
* pDst[n] = pSrcA[n] * pSrcB[n], 0 <= n < blockSize.
* </pre>
*
* There are separate functions for floating-point, Q7, Q15, and Q31 data types.
*/
/**
* @addtogroup BasicMult
* @{
*/
/**
* @brief Floating-point vector multiplication.
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[out] *pDst points to the output vector
* @param[in] blockSize number of samples in each vector
* @return none.
*/
void arm_mult_f32(
float32_t * pSrcA,
float32_t * pSrcB,
float32_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counters */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
float32_t inA1, inA2, inA3, inA4; /* temporary input variables */
float32_t inB1, inB2, inB3, inB4; /* temporary input variables */
float32_t out1, out2, out3, out4; /* temporary output variables */
/* loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C = A * B */
/* Multiply the inputs and store the results in output buffer */
/* read sample from sourceA */
inA1 = *pSrcA;
/* read sample from sourceB */
inB1 = *pSrcB;
/* read sample from sourceA */
inA2 = *(pSrcA + 1);
/* read sample from sourceB */
inB2 = *(pSrcB + 1);
/* out = sourceA * sourceB */
out1 = inA1 * inB1;
/* read sample from sourceA */
inA3 = *(pSrcA + 2);
/* read sample from sourceB */
inB3 = *(pSrcB + 2);
/* out = sourceA * sourceB */
out2 = inA2 * inB2;
/* read sample from sourceA */
inA4 = *(pSrcA + 3);
/* store result to destination buffer */
*pDst = out1;
/* read sample from sourceB */
inB4 = *(pSrcB + 3);
/* out = sourceA * sourceB */
out3 = inA3 * inB3;
/* store result to destination buffer */
*(pDst + 1) = out2;
/* out = sourceA * sourceB */
out4 = inA4 * inB4;
/* store result to destination buffer */
*(pDst + 2) = out3;
/* store result to destination buffer */
*(pDst + 3) = out4;
/* update pointers to process next samples */
pSrcA += 4u;
pSrcB += 4u;
pDst += 4u;
/* Decrement the blockSize loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = A * B */
/* Multiply the inputs and store the results in output buffer */
*pDst++ = (*pSrcA++) * (*pSrcB++);
/* Decrement the blockSize loop counter */
blkCnt--;
}
}
/**
* @} end of BasicMult group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_mult_q15.c deleted 100644 → 0
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
*
* $Date: 19. October 2015
* $Revision: V.1.4.5 a
*
* Project: CMSIS DSP Library
* Title: arm_mult_q15.c
*
* Description: Q15 vector multiplication.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMath
*/
/**
* @addtogroup BasicMult
* @{
*/
/**
* @brief Q15 vector multiplication
* @param[in] *pSrcA points to the first input vector
* @param[in] *pSrcB points to the second input vector
* @param[out] *pDst points to the output vector
* @param[in] blockSize number of samples in each vector
* @return none.
*
* <b>Scaling and Overflow Behavior:</b>
* \par
* The function uses saturating arithmetic.
* Results outside of the allowable Q15 range [0x8000 0x7FFF] will be saturated.
*/
void arm_mult_q15(
q15_t * pSrcA,
q15_t * pSrcB,
q15_t * pDst,
uint32_t blockSize)
{
uint32_t blkCnt; /* loop counters */
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
q31_t inA1, inA2, inB1, inB2; /* temporary input variables */
q15_t out1, out2, out3, out4; /* temporary output variables */
q31_t mul1, mul2, mul3, mul4; /* temporary variables */
/* loop Unrolling */
blkCnt = blockSize >> 2u;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* read two samples at a time from sourceA */
inA1 = *__SIMD32(pSrcA)++;
/* read two samples at a time from sourceB */
inB1 = *__SIMD32(pSrcB)++;
/* read two samples at a time from sourceA */
inA2 = *__SIMD32(pSrcA)++;
/* read two samples at a time from sourceB */
inB2 = *__SIMD32(pSrcB)++;
/* multiply mul = sourceA * sourceB */
mul1 = (q31_t) ((q15_t) (inA1 >> 16) * (q15_t) (inB1 >> 16));
mul2 = (q31_t) ((q15_t) inA1 * (q15_t) inB1);
mul3 = (q31_t) ((q15_t) (inA2 >> 16) * (q15_t) (inB2 >> 16));
mul4 = (q31_t) ((q15_t) inA2 * (q15_t) inB2);
/* saturate result to 16 bit */
out1 = (q15_t) __SSAT(mul1 >> 15, 16);
out2 = (q15_t) __SSAT(mul2 >> 15, 16);
out3 = (q15_t) __SSAT(mul3 >> 15, 16);
out4 = (q15_t) __SSAT(mul4 >> 15, 16);
/* store the result */
#ifndef ARM_MATH_BIG_ENDIAN
*__SIMD32(pDst)++ = __PKHBT(out2, out1, 16);
*__SIMD32(pDst)++ = __PKHBT(out4, out3, 16);
#else
*__SIMD32(pDst)++ = __PKHBT(out2, out1, 16);
*__SIMD32(pDst)++ = __PKHBT(out4, out3, 16);
#endif /* #ifndef ARM_MATH_BIG_ENDIAN */
/* Decrement the blockSize loop counter */
blkCnt--;
}
/* If the blockSize is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = blockSize % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = blockSize;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C = A * B */
/* Multiply the inputs and store the result in the destination buffer */
*pDst++ = (q15_t) __SSAT((((q31_t) (*pSrcA++) * (*pSrcB++)) >> 15), 16);
/* Decrement the blockSize loop counter */
blkCnt--;
}
}
/**
* @} end of BasicMult group
*/
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/CommonTables/arm_common_tables.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/TransformFunctions/arm_dct4_init_f32.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/TransformFunctions/arm_dct4_init_q15.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/TransformFunctions/arm_dct4_init_q31.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/TransformFunctions/arm_rfft_init_f32.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/TransformFunctions/arm_rfft_init_q15.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/DSP_Lib/Source/TransformFunctions/arm_rfft_init_q31.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xb.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xe.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f101x6.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xb.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xe.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xg.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f102x6.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f102xb.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xg.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f105xc.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f107xc.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Include/arm_math.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Include/core_cm3.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Include/core_cm4.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Include/core_cm7.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/CMSIS/Include/core_sc300.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_eth.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_adc.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
templates/blackpill/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c deleted 100644 → 0
This source diff could not be displayed because it is too large. You can view the blob instead.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or sign in to comment