Commit ca3e26f9 by Enrico Pozzobon

useless

parent f3a795af
[PreviousGenFiles]
HeaderPath=/home/sr/STM32Cube/f7/Inc
HeaderFiles=stm32f7xx_it.h;stm32_assert.h;stm32f7xx_hal_conf.h;main.h;
SourcePath=/home/sr/STM32Cube/f7/Src
HeaderPath=/home/enrico/Projects/lw_crypto_compare/templates/f7/Inc
HeaderFiles=stm32f7xx_it.h;stm32f7xx_hal_conf.h;main.h;stm32_assert.h;
SourcePath=/home/enrico/Projects/lw_crypto_compare/templates/f7/Src
SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c;
[PreviousLibFiles]
LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usb.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/cmsis_armclang.h;
LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm3.h;
[PreviousUsedMakefileFiles]
SourceFiles=Src/main.c;Src/stm32f7xx_it.c;Src/stm32f7xx_hal_msp.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usb.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c;Src/system_stm32f7xx.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usb.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c;Src/system_stm32f7xx.c;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;null;
HeaderPath=Drivers/STM32F7xx_HAL_Driver/Inc;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F7xx/Include;Drivers/CMSIS/Include;Inc;
CDefines=USE_FULL_LL_DRIVER;USE_HAL_DRIVER;STM32F746xx;USE_FULL_LL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER;STM32F746xx;
SourceFiles=Src/main.c;Src/stm32f7xx_it.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c;Src/system_stm32f7xx.c;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;null;
HeaderPath=Drivers/STM32F7xx_HAL_Driver/Inc;Drivers/CMSIS/Device/ST/STM32F7xx/Include;Drivers/CMSIS/Include;Inc;
CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:0;ART_ACCLERATOR_ENABLE:0;USE_HAL_DRIVER;STM32F746xx;USE_FULL_LL_DRIVER;USE_HAL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;EXTERNAL_CLOCK_VALUE:12288000;HSI_VALUE:16000000;LSI_VALUE:32000;VDD_VALUE:3300;PREFETCH_ENABLE:0;ART_ACCLERATOR_ENABLE:0;USE_HAL_DRIVER;STM32F746xx;
/*********************************************************************
* SEGGER Microcontroller GmbH *
* Solutions for real time microcontroller applications *
**********************************************************************
* *
* (c) 1995 - 2018 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER RTT * Real Time Transfer for embedded targets *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT.h
Purpose : Implementation of SEGGER real-time transfer which allows
real-time communication on targets which support debugger
memory accesses while the CPU is running.
Revision: $Rev: 11303 $
----------------------------------------------------------------------
*/
#ifndef SEGGER_RTT_H
#define SEGGER_RTT_H
#include "SEGGER_RTT_Conf.h"
/*********************************************************************
*
* Defines, fixed
*
**********************************************************************
*/
/*********************************************************************
*
* Types
*
**********************************************************************
*/
//
// Description for a circular buffer (also called "ring buffer")
// which is used as up-buffer (T->H)
//
typedef struct {
const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4"
char* pBuffer; // Pointer to start of buffer
unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty.
unsigned WrOff; // Position of next item to be written by either target.
volatile unsigned RdOff; // Position of next item to be read by host. Must be volatile since it may be modified by host.
unsigned Flags; // Contains configuration flags
} SEGGER_RTT_BUFFER_UP;
//
// Description for a circular buffer (also called "ring buffer")
// which is used as down-buffer (H->T)
//
typedef struct {
const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4"
char* pBuffer; // Pointer to start of buffer
unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty.
volatile unsigned WrOff; // Position of next item to be written by host. Must be volatile since it may be modified by host.
unsigned RdOff; // Position of next item to be read by target (down-buffer).
unsigned Flags; // Contains configuration flags
} SEGGER_RTT_BUFFER_DOWN;
//
// RTT control block which describes the number of buffers available
// as well as the configuration for each buffer
//
//
typedef struct {
char acID[16]; // Initialized to "SEGGER RTT"
int MaxNumUpBuffers; // Initialized to SEGGER_RTT_MAX_NUM_UP_BUFFERS (type. 2)
int MaxNumDownBuffers; // Initialized to SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (type. 2)
SEGGER_RTT_BUFFER_UP aUp[SEGGER_RTT_MAX_NUM_UP_BUFFERS]; // Up buffers, transferring information up from target via debug probe to host
SEGGER_RTT_BUFFER_DOWN aDown[SEGGER_RTT_MAX_NUM_DOWN_BUFFERS]; // Down buffers, transferring information down from host via debug probe to target
} SEGGER_RTT_CB;
/*********************************************************************
*
* Global data
*
**********************************************************************
*/
extern SEGGER_RTT_CB _SEGGER_RTT;
/*********************************************************************
*
* RTT API functions
*
**********************************************************************
*/
#ifdef __cplusplus
extern "C" {
#endif
int SEGGER_RTT_AllocDownBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags);
int SEGGER_RTT_AllocUpBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags);
int SEGGER_RTT_ConfigUpBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags);
int SEGGER_RTT_ConfigDownBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags);
int SEGGER_RTT_GetKey (void);
unsigned SEGGER_RTT_HasData (unsigned BufferIndex);
int SEGGER_RTT_HasKey (void);
unsigned SEGGER_RTT_HasDataUp (unsigned BufferIndex);
void SEGGER_RTT_Init (void);
unsigned SEGGER_RTT_Read (unsigned BufferIndex, void* pBuffer, unsigned BufferSize);
unsigned SEGGER_RTT_ReadNoLock (unsigned BufferIndex, void* pData, unsigned BufferSize);
int SEGGER_RTT_SetNameDownBuffer (unsigned BufferIndex, const char* sName);
int SEGGER_RTT_SetNameUpBuffer (unsigned BufferIndex, const char* sName);
int SEGGER_RTT_SetFlagsDownBuffer (unsigned BufferIndex, unsigned Flags);
int SEGGER_RTT_SetFlagsUpBuffer (unsigned BufferIndex, unsigned Flags);
int SEGGER_RTT_WaitKey (void);
unsigned SEGGER_RTT_Write (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
unsigned SEGGER_RTT_WriteNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
unsigned SEGGER_RTT_WriteSkipNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
unsigned SEGGER_RTT_WriteString (unsigned BufferIndex, const char* s);
void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
unsigned SEGGER_RTT_PutChar (unsigned BufferIndex, char c);
unsigned SEGGER_RTT_PutCharSkip (unsigned BufferIndex, char c);
unsigned SEGGER_RTT_PutCharSkipNoLock (unsigned BufferIndex, char c);
//
// Function macro for performance optimization
//
#define SEGGER_RTT_HASDATA(n) (_SEGGER_RTT.aDown[n].WrOff - _SEGGER_RTT.aDown[n].RdOff)
/*********************************************************************
*
* RTT "Terminal" API functions
*
**********************************************************************
*/
int SEGGER_RTT_SetTerminal (char TerminalId);
int SEGGER_RTT_TerminalOut (char TerminalId, const char* s);
/*********************************************************************
*
* RTT printf functions (require SEGGER_RTT_printf.c)
*
**********************************************************************
*/
int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...);
#ifdef __cplusplus
}
#endif
/*********************************************************************
*
* Defines
*
**********************************************************************
*/
//
// Operating modes. Define behavior if buffer is full (not enough space for entire message)
//
#define SEGGER_RTT_MODE_NO_BLOCK_SKIP (0U) // Skip. Do not block, output nothing. (Default)
#define SEGGER_RTT_MODE_NO_BLOCK_TRIM (1U) // Trim: Do not block, output as much as fits.
#define SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL (2U) // Block: Wait until there is space in the buffer.
#define SEGGER_RTT_MODE_MASK (3U)
//
// Control sequences, based on ANSI.
// Can be used to control color, and clear the screen
//
#define RTT_CTRL_RESET "\x1B[0m" // Reset to default colors
#define RTT_CTRL_CLEAR "\x1B[2J" // Clear screen, reposition cursor to top left
#define RTT_CTRL_TEXT_BLACK "\x1B[2;30m"
#define RTT_CTRL_TEXT_RED "\x1B[2;31m"
#define RTT_CTRL_TEXT_GREEN "\x1B[2;32m"
#define RTT_CTRL_TEXT_YELLOW "\x1B[2;33m"
#define RTT_CTRL_TEXT_BLUE "\x1B[2;34m"
#define RTT_CTRL_TEXT_MAGENTA "\x1B[2;35m"
#define RTT_CTRL_TEXT_CYAN "\x1B[2;36m"
#define RTT_CTRL_TEXT_WHITE "\x1B[2;37m"
#define RTT_CTRL_TEXT_BRIGHT_BLACK "\x1B[1;30m"
#define RTT_CTRL_TEXT_BRIGHT_RED "\x1B[1;31m"
#define RTT_CTRL_TEXT_BRIGHT_GREEN "\x1B[1;32m"
#define RTT_CTRL_TEXT_BRIGHT_YELLOW "\x1B[1;33m"
#define RTT_CTRL_TEXT_BRIGHT_BLUE "\x1B[1;34m"
#define RTT_CTRL_TEXT_BRIGHT_MAGENTA "\x1B[1;35m"
#define RTT_CTRL_TEXT_BRIGHT_CYAN "\x1B[1;36m"
#define RTT_CTRL_TEXT_BRIGHT_WHITE "\x1B[1;37m"
#define RTT_CTRL_BG_BLACK "\x1B[24;40m"
#define RTT_CTRL_BG_RED "\x1B[24;41m"
#define RTT_CTRL_BG_GREEN "\x1B[24;42m"
#define RTT_CTRL_BG_YELLOW "\x1B[24;43m"
#define RTT_CTRL_BG_BLUE "\x1B[24;44m"
#define RTT_CTRL_BG_MAGENTA "\x1B[24;45m"
#define RTT_CTRL_BG_CYAN "\x1B[24;46m"
#define RTT_CTRL_BG_WHITE "\x1B[24;47m"
#define RTT_CTRL_BG_BRIGHT_BLACK "\x1B[4;40m"
#define RTT_CTRL_BG_BRIGHT_RED "\x1B[4;41m"
#define RTT_CTRL_BG_BRIGHT_GREEN "\x1B[4;42m"
#define RTT_CTRL_BG_BRIGHT_YELLOW "\x1B[4;43m"
#define RTT_CTRL_BG_BRIGHT_BLUE "\x1B[4;44m"
#define RTT_CTRL_BG_BRIGHT_MAGENTA "\x1B[4;45m"
#define RTT_CTRL_BG_BRIGHT_CYAN "\x1B[4;46m"
#define RTT_CTRL_BG_BRIGHT_WHITE "\x1B[4;47m"
#endif
/*************************** End of file ****************************/
/*********************************************************************
* SEGGER Microcontroller GmbH *
* Solutions for real time microcontroller applications *
**********************************************************************
* *
* (c) 1995 - 2018 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER RTT * Real Time Transfer for embedded targets *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT_Conf.h
Purpose : Implementation of SEGGER real-time transfer (RTT) which
allows real-time communication on targets which support
debugger memory accesses while the CPU is running.
Revision: $Rev: 9599 $
*/
#ifndef SEGGER_RTT_CONF_H
#define SEGGER_RTT_CONF_H
#ifdef __IAR_SYSTEMS_ICC__
#include <intrinsics.h>
#endif
/*********************************************************************
*
* Defines, configurable
*
**********************************************************************
*/
#define SEGGER_RTT_MAX_NUM_UP_BUFFERS (3) // Max. number of up-buffers (T->H) available on this target (Default: 3)
#define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (3) // Max. number of down-buffers (H->T) available on this target (Default: 3)
#define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k)
#define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16)
#define SEGGER_RTT_PRINTF_BUFFER_SIZE (64u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64)
#define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0)
#define USE_RTT_ASM (0) // Use assembler version of SEGGER_RTT.c when 1
/*********************************************************************
*
* RTT memcpy configuration
*
* memcpy() is good for large amounts of data,
* but the overhead is big for small amounts, which are usually stored via RTT.
* With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead.
*
* SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions.
* This is may be required with memory access restrictions,
* such as on Cortex-A devices with MMU.
*/
#define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop
//
// Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets
//
//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__))
// #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes))
//#endif
//
// Target is not allowed to perform other RTT operations while string still has not been stored completely.
// Otherwise we would probably end up with a mixed string in the buffer.
// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here.
//
// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4.
// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches.
// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly.
// (Higher priority = lower priority number)
// Default value for embOS: 128u
// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
// In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC
// or define SEGGER_RTT_LOCK() to completely disable interrupts.
//
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x50) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20)
/*********************************************************************
*
* RTT lock configuration for SEGGER Embedded Studio,
* Rowley CrossStudio and GCC
*/
#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)
#ifdef __ARM_ARCH_6M__
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs %0, primask \n\t" \
"mov r1, $1 \n\t" \
"msr primask, r1 \n\t" \
: "=r" (LockState) \
: \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \
: \
: "r" (LockState) \
: \
); \
}
#elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs %0, basepri \n\t" \
"mov r1, %1 \n\t" \
"msr basepri, r1 \n\t" \
: "=r" (LockState) \
: "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \
: \
: "r" (LockState) \
: \
); \
}
#elif defined(__ARM_ARCH_7A__)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs r1, CPSR \n\t" \
"mov %0, r1 \n\t" \
"orr r1, r1, #0xC0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: "=r" (LockState) \
: \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \
"mrs r1, CPSR \n\t" \
"bic r1, r1, #0xC0 \n\t" \
"and r0, r0, #0xC0 \n\t" \
"orr r1, r1, r0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: \
: "r" (LockState) \
: "r0", "r1" \
); \
}
#else
#define SEGGER_RTT_LOCK()
#define SEGGER_RTT_UNLOCK()
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR EWARM
*/
#ifdef __ICCARM__
#if (defined (__ARM6M__) && (__CORE__ == __ARM6M__))
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(LockState); \
}
#elif ((defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_BASEPRI(); \
__set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() __set_BASEPRI(LockState); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR RX
*/
#ifdef __ICCRX__
#define SEGGER_RTT_LOCK() { \
unsigned long LockState; \
LockState = __get_interrupt_state(); \
__disable_interrupt();
#define SEGGER_RTT_UNLOCK() __set_interrupt_state(LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for IAR RL78
*/
#ifdef __ICCRL78__
#define SEGGER_RTT_LOCK() { \
__istate_t LockState; \
LockState = __get_interrupt_state(); \
__disable_interrupt();
#define SEGGER_RTT_UNLOCK() __set_interrupt_state(LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for KEIL ARM
*/
#ifdef __CC_ARM
#if (defined __TARGET_ARCH_6S_M)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
register unsigned char PRIMASK __asm( "primask"); \
LockState = PRIMASK; \
PRIMASK = 1u; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() PRIMASK = LockState; \
__schedule_barrier(); \
}
#elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
register unsigned char BASEPRI __asm( "basepri"); \
LockState = BASEPRI; \
BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() BASEPRI = LockState; \
__schedule_barrier(); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for TI ARM
*/
#ifdef __TI_ARM__
#if defined (__TI_ARM_V6M0__)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(LockState); \
}
#elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = OS_GetBASEPRI(); \
OS_SetBASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() OS_SetBASEPRI(LockState); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration fallback
*/
#ifndef SEGGER_RTT_LOCK
#define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts)
#endif
#ifndef SEGGER_RTT_UNLOCK
#define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state)
#endif
#endif
/*************************** End of file ****************************/
......@@ -28,7 +28,6 @@ extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"
#include "stm32f7xx_ll_rcc.h"
#include "stm32f7xx_ll_bus.h"
#include "stm32f7xx_ll_system.h"
......@@ -41,6 +40,10 @@ extern "C" {
#include "stm32f7xx.h"
#include "stm32f7xx_ll_gpio.h"
#if defined(USE_FULL_ASSERT)
#include "stm32_assert.h"
#endif /* USE_FULL_ASSERT */
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
......@@ -121,6 +124,18 @@ void Error_Handler(void);
#define SW0_GPIO_Port GPIOB
#define LD2_Pin LL_GPIO_PIN_7
#define LD2_GPIO_Port GPIOB
#ifndef NVIC_PRIORITYGROUP_0
#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority,
4 bits for subpriority */
#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority,
3 bits for subpriority */
#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority,
2 bits for subpriority */
#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority,
1 bit for subpriority */
#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority,
0 bit for subpriority */
#endif
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
......
#pragma once
void test_setup();
void test_loop();
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
void uartp_send(const void *src, uint16_t len);
uint16_t uartp_recv(void *dst, uint16_t buf_len);
#ifdef __cplusplus
}
#endif
##########################################################################################################################
# File automatically-generated by tool: [projectgenerator] version: [3.3.0] date: [Sun Jul 14 11:29:48 CEST 2019]
# File automatically-generated by tool: [projectgenerator] version: [3.4.0] date: [Sun Jul 21 14:48:38 CEST 2019]
##########################################################################################################################
# ------------------------------------------------
......@@ -38,22 +38,17 @@ BUILD_DIR = build
C_SOURCES = \
Src/main.c \
Src/stm32f7xx_it.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usb.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c \
Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c \
Src/system_stm32f7xx.c \
Src/RTT/SEGGER_RTT.c \
Src/RTT/SEGGER_RTT_printf.c \
$(SRC_FILES)
Src/test.c \
Src/uartp.c \
$(SRC_FILES)
# ASM sources
ASM_SOURCES = \
......@@ -102,11 +97,28 @@ AS_DEFS =
# C defines
C_DEFS = \
-DUSE_FULL_LL_DRIVER \
-DUSE_HAL_DRIVER \
-DHSE_VALUE=8000000 \
-DHSE_STARTUP_TIMEOUT=100 \
-DLSE_STARTUP_TIMEOUT=5000 \
-DLSE_VALUE=32768 \
-DEXTERNAL_CLOCK_VALUE=12288000 \
-DHSI_VALUE=16000000 \
-DLSI_VALUE=32000 \
-DVDD_VALUE=3300 \
-DPREFETCH_ENABLE=0 \
-DART_ACCLERATOR_ENABLE=0 \
-DSTM32F746xx \
-DUSE_FULL_LL_DRIVER \
-DUSE_HAL_DRIVER \
-DUSE_HAL_DRIVER \
-DHSE_VALUE=8000000 \
-DHSE_STARTUP_TIMEOUT=100 \
-DLSE_STARTUP_TIMEOUT=5000 \
-DLSE_VALUE=32768 \
-DEXTERNAL_CLOCK_VALUE=12288000 \
-DHSI_VALUE=16000000 \
-DLSI_VALUE=32000 \
-DVDD_VALUE=3300 \
-DPREFETCH_ENABLE=0 \
-DART_ACCLERATOR_ENABLE=0 \
-DSTM32F746xx
......@@ -117,7 +129,6 @@ AS_INCLUDES =
C_INCLUDES = \
-IInc \
-IDrivers/STM32F7xx_HAL_Driver/Inc \
-IDrivers/STM32F7xx_HAL_Driver/Inc/Legacy \
-IDrivers/CMSIS/Device/ST/STM32F7xx/Include \
-IDrivers/CMSIS/Include \
-IDrivers/CMSIS/Include
......
/*********************************************************************
* SEGGER Microcontroller GmbH *
* Solutions for real time microcontroller applications *
**********************************************************************
* *
* (c) 1995 - 2018 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER RTT * Real Time Transfer for embedded targets *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT.c
Purpose : Implementation of SEGGER real-time transfer (RTT) which
allows real-time communication on targets which support
debugger memory accesses while the CPU is running.
Revision: $Rev: 10904 $
Additional information:
Type "int" is assumed to be 32-bits in size
H->T Host to target communication
T->H Target to host communication
RTT channel 0 is always present and reserved for Terminal usage.
Name is fixed to "Terminal"
Effective buffer size: SizeOfBuffer - 1
WrOff == RdOff: Buffer is empty
WrOff == (RdOff - 1): Buffer is full
WrOff > RdOff: Free space includes wrap-around
WrOff < RdOff: Used space includes wrap-around
(WrOff == (SizeOfBuffer - 1)) && (RdOff == 0):
Buffer full and wrap-around after next byte
----------------------------------------------------------------------
*/
#include "SEGGER_RTT.h"
#include <string.h> // for memcpy
/*********************************************************************
*
* Configuration, default values
*
**********************************************************************
*/
#ifndef BUFFER_SIZE_UP
#define BUFFER_SIZE_UP 1024 // Size of the buffer for terminal output of target, up to host
#endif
#ifndef BUFFER_SIZE_DOWN
#define BUFFER_SIZE_DOWN 16 // Size of the buffer for terminal input to target from host (Usually keyboard input)
#endif
#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS
#define SEGGER_RTT_MAX_NUM_UP_BUFFERS 2 // Number of up-buffers (T->H) available on this target
#endif
#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS
#define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS 2 // Number of down-buffers (H->T) available on this target
#endif
#ifndef SEGGER_RTT_BUFFER_SECTION
#if defined(SEGGER_RTT_SECTION)
#define SEGGER_RTT_BUFFER_SECTION SEGGER_RTT_SECTION
#endif
#endif
#ifndef SEGGER_RTT_ALIGNMENT
#define SEGGER_RTT_ALIGNMENT 0
#endif
#ifndef SEGGER_RTT_BUFFER_ALIGNMENT
#define SEGGER_RTT_BUFFER_ALIGNMENT 0
#endif
#ifndef SEGGER_RTT_MODE_DEFAULT
#define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP
#endif
#ifndef SEGGER_RTT_LOCK
#define SEGGER_RTT_LOCK()
#endif
#ifndef SEGGER_RTT_UNLOCK
#define SEGGER_RTT_UNLOCK()
#endif
#ifndef STRLEN
#define STRLEN(a) strlen((a))
#endif
#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP
#define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0
#endif
#ifndef SEGGER_RTT_MEMCPY
#ifdef MEMCPY
#define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) MEMCPY((pDest), (pSrc), (NumBytes))
#else
#define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) memcpy((pDest), (pSrc), (NumBytes))
#endif
#endif
#ifndef MIN
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#endif
#ifndef MAX
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#endif
//
// For some environments, NULL may not be defined until certain headers are included
//
#ifndef NULL
#define NULL 0
#endif
/*********************************************************************
*
* Defines, fixed
*
**********************************************************************
*/
#if (defined __ICCARM__) || (defined __ICCRX__)
#define RTT_PRAGMA(P) _Pragma(#P)
#endif
#if SEGGER_RTT_ALIGNMENT || SEGGER_RTT_BUFFER_ALIGNMENT
#if (defined __GNUC__)
#define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment)))
#elif (defined __ICCARM__) || (defined __ICCRX__)
#define PRAGMA(A) _Pragma(#A)
#define SEGGER_RTT_ALIGN(Var, Alignment) RTT_PRAGMA(data_alignment=Alignment) \
Var
#elif (defined __CC_ARM)
#define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment)))
#else
#error "Alignment not supported for this compiler."
#endif
#else
#define SEGGER_RTT_ALIGN(Var, Alignment) Var
#endif
#if defined(SEGGER_RTT_SECTION) || defined (SEGGER_RTT_BUFFER_SECTION)
#if (defined __GNUC__)
#define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section))) Var
#elif (defined __ICCARM__) || (defined __ICCRX__)
#define SEGGER_RTT_PUT_SECTION(Var, Section) RTT_PRAGMA(location=Section) \
Var
#elif (defined __CC_ARM)
#define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section), zero_init)) Var
#else
#error "Section placement not supported for this compiler."
#endif
#else
#define SEGGER_RTT_PUT_SECTION(Var, Section) Var
#endif
#if SEGGER_RTT_ALIGNMENT
#define SEGGER_RTT_CB_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_ALIGNMENT)
#else
#define SEGGER_RTT_CB_ALIGN(Var) Var
#endif
#if SEGGER_RTT_BUFFER_ALIGNMENT
#define SEGGER_RTT_BUFFER_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_BUFFER_ALIGNMENT)
#else
#define SEGGER_RTT_BUFFER_ALIGN(Var) Var
#endif
#if defined(SEGGER_RTT_SECTION)
#define SEGGER_RTT_PUT_CB_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_SECTION)
#else
#define SEGGER_RTT_PUT_CB_SECTION(Var) Var
#endif
#if defined(SEGGER_RTT_BUFFER_SECTION)
#define SEGGER_RTT_PUT_BUFFER_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_BUFFER_SECTION)
#else
#define SEGGER_RTT_PUT_BUFFER_SECTION(Var) Var
#endif
/*********************************************************************
*
* Static const data
*
**********************************************************************
*/
static unsigned char _aTerminalId[16] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' };
/*********************************************************************
*
* Static data
*
**********************************************************************
*/
//
// RTT Control Block and allocate buffers for channel 0
//
SEGGER_RTT_PUT_CB_SECTION(SEGGER_RTT_CB_ALIGN(SEGGER_RTT_CB _SEGGER_RTT));
SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acUpBuffer [BUFFER_SIZE_UP]));
SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acDownBuffer[BUFFER_SIZE_DOWN]));
static char _ActiveTerminal;
/*********************************************************************
*
* Static functions
*
**********************************************************************
*/
/*********************************************************************
*
* _DoInit()
*
* Function description
* Initializes the control block an buffers.
* May only be called via INIT() to avoid overriding settings.
*
*/
#define INIT() do { \
if (_SEGGER_RTT.acID[0] == '\0') { _DoInit(); } \
} while (0)
static void _DoInit(void) {
SEGGER_RTT_CB* p;
//
// Initialize control block
//
p = &_SEGGER_RTT;
p->MaxNumUpBuffers = SEGGER_RTT_MAX_NUM_UP_BUFFERS;
p->MaxNumDownBuffers = SEGGER_RTT_MAX_NUM_DOWN_BUFFERS;
//
// Initialize up buffer 0
//
p->aUp[0].sName = "Terminal";
p->aUp[0].pBuffer = _acUpBuffer;
p->aUp[0].SizeOfBuffer = sizeof(_acUpBuffer);
p->aUp[0].RdOff = 0u;
p->aUp[0].WrOff = 0u;
p->aUp[0].Flags = SEGGER_RTT_MODE_DEFAULT;
//
// Initialize down buffer 0
//
p->aDown[0].sName = "Terminal";
p->aDown[0].pBuffer = _acDownBuffer;
p->aDown[0].SizeOfBuffer = sizeof(_acDownBuffer);
p->aDown[0].RdOff = 0u;
p->aDown[0].WrOff = 0u;
p->aDown[0].Flags = SEGGER_RTT_MODE_DEFAULT;
//
// Finish initialization of the control block.
// Copy Id string in three steps to make sure "SEGGER RTT" is not found
// in initializer memory (usually flash) by J-Link
//
strcpy(&p->acID[7], "RTT");
strcpy(&p->acID[0], "SEGGER");
p->acID[6] = ' ';
}
/*********************************************************************
*
* _WriteBlocking()
*
* Function description
* Stores a specified number of characters in SEGGER RTT ring buffer
* and updates the associated write pointer which is periodically
* read by the host.
* The caller is responsible for managing the write chunk sizes as
* _WriteBlocking() will block until all data has been posted successfully.
*
* Parameters
* pRing Ring buffer to post to.
* pBuffer Pointer to character array. Does not need to point to a \0 terminated string.
* NumBytes Number of bytes to be stored in the SEGGER RTT control block.
*
* Return value
* >= 0 - Number of bytes written into buffer.
*/
static unsigned _WriteBlocking(SEGGER_RTT_BUFFER_UP* pRing, const char* pBuffer, unsigned NumBytes) {
unsigned NumBytesToWrite;
unsigned NumBytesWritten;
unsigned RdOff;
unsigned WrOff;
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
char* pDst;
#endif
//
// Write data to buffer and handle wrap-around if necessary
//
NumBytesWritten = 0u;
WrOff = pRing->WrOff;
do {
RdOff = pRing->RdOff; // May be changed by host (debug probe) in the meantime
if (RdOff > WrOff) {
NumBytesToWrite = RdOff - WrOff - 1u;
} else {
NumBytesToWrite = pRing->SizeOfBuffer - (WrOff - RdOff + 1u);
}
NumBytesToWrite = MIN(NumBytesToWrite, (pRing->SizeOfBuffer - WrOff)); // Number of bytes that can be written until buffer wrap-around
NumBytesToWrite = MIN(NumBytesToWrite, NumBytes);
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + WrOff;
NumBytesWritten += NumBytesToWrite;
NumBytes -= NumBytesToWrite;
WrOff += NumBytesToWrite;
while (NumBytesToWrite--) {
*pDst++ = *pBuffer++;
};
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + WrOff, pBuffer, NumBytesToWrite);
NumBytesWritten += NumBytesToWrite;
pBuffer += NumBytesToWrite;
NumBytes -= NumBytesToWrite;
WrOff += NumBytesToWrite;
#endif
if (WrOff == pRing->SizeOfBuffer) {
WrOff = 0u;
}
pRing->WrOff = WrOff;
} while (NumBytes);
//
return NumBytesWritten;
}
/*********************************************************************
*
* _WriteNoCheck()
*
* Function description
* Stores a specified number of characters in SEGGER RTT ring buffer
* and updates the associated write pointer which is periodically
* read by the host.
* It is callers responsibility to make sure data actually fits in buffer.
*
* Parameters
* pRing Ring buffer to post to.
* pBuffer Pointer to character array. Does not need to point to a \0 terminated string.
* NumBytes Number of bytes to be stored in the SEGGER RTT control block.
*
* Notes
* (1) If there might not be enough space in the "Up"-buffer, call _WriteBlocking
*/
static void _WriteNoCheck(SEGGER_RTT_BUFFER_UP* pRing, const char* pData, unsigned NumBytes) {
unsigned NumBytesAtOnce;
unsigned WrOff;
unsigned Rem;
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
char* pDst;
#endif
WrOff = pRing->WrOff;
Rem = pRing->SizeOfBuffer - WrOff;
if (Rem > NumBytes) {
//
// All data fits before wrap around
//
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + WrOff;
WrOff += NumBytes;
while (NumBytes--) {
*pDst++ = *pData++;
};
pRing->WrOff = WrOff;
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + WrOff, pData, NumBytes);
pRing->WrOff = WrOff + NumBytes;
#endif
} else {
//
// We reach the end of the buffer, so need to wrap around
//
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + WrOff;
NumBytesAtOnce = Rem;
while (NumBytesAtOnce--) {
*pDst++ = *pData++;
};
pDst = pRing->pBuffer;
NumBytesAtOnce = NumBytes - Rem;
while (NumBytesAtOnce--) {
*pDst++ = *pData++;
};
pRing->WrOff = NumBytes - Rem;
#else
NumBytesAtOnce = Rem;
SEGGER_RTT_MEMCPY(pRing->pBuffer + WrOff, pData, NumBytesAtOnce);
NumBytesAtOnce = NumBytes - Rem;
SEGGER_RTT_MEMCPY(pRing->pBuffer, pData + Rem, NumBytesAtOnce);
pRing->WrOff = NumBytesAtOnce;
#endif
}
}
/*********************************************************************
*
* _PostTerminalSwitch()
*
* Function description
* Switch terminal to the given terminal ID. It is the caller's
* responsibility to ensure the terminal ID is correct and there is
* enough space in the buffer for this to complete successfully.
*
* Parameters
* pRing Ring buffer to post to.
* TerminalId Terminal ID to switch to.
*/
static void _PostTerminalSwitch(SEGGER_RTT_BUFFER_UP* pRing, unsigned char TerminalId) {
unsigned char ac[2];
ac[0] = 0xFFu;
ac[1] = _aTerminalId[TerminalId]; // Caller made already sure that TerminalId does not exceed our terminal limit
_WriteBlocking(pRing, (const char*)ac, 2u);
}
/*********************************************************************
*
* _GetAvailWriteSpace()
*
* Function description
* Returns the number of bytes that can be written to the ring
* buffer without blocking.
*
* Parameters
* pRing Ring buffer to check.
*
* Return value
* Number of bytes that are free in the buffer.
*/
static unsigned _GetAvailWriteSpace(SEGGER_RTT_BUFFER_UP* pRing) {
unsigned RdOff;
unsigned WrOff;
unsigned r;
//
// Avoid warnings regarding volatile access order. It's not a problem
// in this case, but dampen compiler enthusiasm.
//
RdOff = pRing->RdOff;
WrOff = pRing->WrOff;
if (RdOff <= WrOff) {
r = pRing->SizeOfBuffer - 1u - WrOff + RdOff;
} else {
r = RdOff - WrOff - 1u;
}
return r;
}
/*********************************************************************
*
* Public code
*
**********************************************************************
*/
/*********************************************************************
*
* SEGGER_RTT_ReadNoLock()
*
* Function description
* Reads characters from SEGGER real-time-terminal control block
* which have been previously stored by the host.
* Do not lock against interrupts and multiple access.
*
* Parameters
* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal").
* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to.
* BufferSize Size of the target application buffer.
*
* Return value
* Number of bytes that have been read.
*/
unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned BufferSize) {
unsigned NumBytesRem;
unsigned NumBytesRead;
unsigned RdOff;
unsigned WrOff;
unsigned char* pBuffer;
SEGGER_RTT_BUFFER_DOWN* pRing;
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
const char* pSrc;
#endif
//
INIT();
pRing = &_SEGGER_RTT.aDown[BufferIndex];
pBuffer = (unsigned char*)pData;
RdOff = pRing->RdOff;
WrOff = pRing->WrOff;
NumBytesRead = 0u;
//
// Read from current read position to wrap-around of buffer, first
//
if (RdOff > WrOff) {
NumBytesRem = pRing->SizeOfBuffer - RdOff;
NumBytesRem = MIN(NumBytesRem, BufferSize);
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pSrc = pRing->pBuffer + RdOff;
NumBytesRead += NumBytesRem;
BufferSize -= NumBytesRem;
RdOff += NumBytesRem;
while (NumBytesRem--) {
*pBuffer++ = *pSrc++;
};
#else
SEGGER_RTT_MEMCPY(pBuffer, pRing->pBuffer + RdOff, NumBytesRem);
NumBytesRead += NumBytesRem;
pBuffer += NumBytesRem;
BufferSize -= NumBytesRem;
RdOff += NumBytesRem;
#endif
//
// Handle wrap-around of buffer
//
if (RdOff == pRing->SizeOfBuffer) {
RdOff = 0u;
}
}
//
// Read remaining items of buffer
//
NumBytesRem = WrOff - RdOff;
NumBytesRem = MIN(NumBytesRem, BufferSize);
if (NumBytesRem > 0u) {
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pSrc = pRing->pBuffer + RdOff;
NumBytesRead += NumBytesRem;
BufferSize -= NumBytesRem;
RdOff += NumBytesRem;
while (NumBytesRem--) {
*pBuffer++ = *pSrc++;
};
#else
SEGGER_RTT_MEMCPY(pBuffer, pRing->pBuffer + RdOff, NumBytesRem);
NumBytesRead += NumBytesRem;
pBuffer += NumBytesRem;
BufferSize -= NumBytesRem;
RdOff += NumBytesRem;
#endif
}
if (NumBytesRead) {
pRing->RdOff = RdOff;
}
//
return NumBytesRead;
}
/*********************************************************************
*
* SEGGER_RTT_Read
*
* Function description
* Reads characters from SEGGER real-time-terminal control block
* which have been previously stored by the host.
*
* Parameters
* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal").
* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to.
* BufferSize Size of the target application buffer.
*
* Return value
* Number of bytes that have been read.
*/
unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) {
unsigned NumBytesRead;
//
SEGGER_RTT_LOCK();
//
// Call the non-locking read function
//
NumBytesRead = SEGGER_RTT_ReadNoLock(BufferIndex, pBuffer, BufferSize);
//
// Finish up.
//
SEGGER_RTT_UNLOCK();
//
return NumBytesRead;
}
/*********************************************************************
*
* SEGGER_RTT_WriteWithOverwriteNoLock
*
* Function description
* Stores a specified number of characters in SEGGER RTT
* control block.
* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application
* and overwrites data if the data does not fit into the buffer.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* pBuffer Pointer to character array. Does not need to point to a \0 terminated string.
* NumBytes Number of bytes to be stored in the SEGGER RTT control block.
*
* Notes
* (1) If there is not enough space in the "Up"-buffer, data is overwritten.
* (2) For performance reasons this function does not call Init()
* and may only be called after RTT has been initialized.
* Either by calling SEGGER_RTT_Init() or calling another RTT API function first.
* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link
* connection reads RTT data.
*/
void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) {
const char* pData;
SEGGER_RTT_BUFFER_UP* pRing;
unsigned Avail;
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
char* pDst;
#endif
pData = (const char *)pBuffer;
//
// Get "to-host" ring buffer and copy some elements into local variables.
//
pRing = &_SEGGER_RTT.aUp[BufferIndex];
//
// Check if we will overwrite data and need to adjust the RdOff.
//
if (pRing->WrOff == pRing->RdOff) {
Avail = pRing->SizeOfBuffer - 1u;
} else if ( pRing->WrOff < pRing->RdOff) {
Avail = pRing->RdOff - pRing->WrOff - 1u;
} else {
Avail = pRing->RdOff - pRing->WrOff - 1u + pRing->SizeOfBuffer;
}
if (NumBytes > Avail) {
pRing->RdOff += (NumBytes - Avail);
while (pRing->RdOff >= pRing->SizeOfBuffer) {
pRing->RdOff -= pRing->SizeOfBuffer;
}
}
//
// Write all data, no need to check the RdOff, but possibly handle multiple wrap-arounds
//
Avail = pRing->SizeOfBuffer - pRing->WrOff;
do {
if (Avail > NumBytes) {
//
// Last round
//
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + pRing->WrOff;
Avail = NumBytes;
while (NumBytes--) {
*pDst++ = *pData++;
};
pRing->WrOff += Avail;
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + pRing->WrOff, pData, NumBytes);
pRing->WrOff += NumBytes;
#endif
break;
} else {
//
// Wrap-around necessary, write until wrap-around and reset WrOff
//
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + pRing->WrOff;
NumBytes -= Avail;
while (Avail--) {
*pDst++ = *pData++;
};
pRing->WrOff = 0;
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + pRing->WrOff, pData, Avail);
pData += Avail;
pRing->WrOff = 0;
NumBytes -= Avail;
#endif
Avail = (pRing->SizeOfBuffer - 1);
}
} while (NumBytes);
}
/*********************************************************************
*
* SEGGER_RTT_WriteSkipNoLock
*
* Function description
* Stores a specified number of characters in SEGGER RTT
* control block which is then read by the host.
* SEGGER_RTT_WriteSkipNoLock does not lock the application and
* skips all data, if the data does not fit into the buffer.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* pBuffer Pointer to character array. Does not need to point to a \0 terminated string.
* NumBytes Number of bytes to be stored in the SEGGER RTT control block.
*
* Return value
* Number of bytes which have been stored in the "Up"-buffer.
*
* Notes
* (1) If there is not enough space in the "Up"-buffer, all data is dropped.
* (2) For performance reasons this function does not call Init()
* and may only be called after RTT has been initialized.
* Either by calling SEGGER_RTT_Init() or calling another RTT API function first.
*/
unsigned SEGGER_RTT_WriteSkipNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) {
const char* pData;
SEGGER_RTT_BUFFER_UP* pRing;
unsigned Avail;
unsigned RdOff;
unsigned WrOff;
unsigned Rem;
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
char* pDst;
#endif
pData = (const char *)pBuffer;
//
// Get "to-host" ring buffer and copy some elements into local variables.
//
pRing = &_SEGGER_RTT.aUp[BufferIndex];
RdOff = pRing->RdOff;
WrOff = pRing->WrOff;
//
// Handle the most common cases fastest.
// Which is:
// RdOff <= WrOff -> Space until wrap around is free.
// AND
// WrOff + NumBytes < SizeOfBuffer -> No Wrap around necessary.
//
// OR
//
// RdOff > WrOff -> Space until RdOff - 1 is free.
// AND
// WrOff + NumBytes < RdOff -> Data fits into buffer
//
if (RdOff <= WrOff) {
//
// Get space until WrOff will be at wrap around.
//
Avail = pRing->SizeOfBuffer - 1u - WrOff ;
if (Avail >= NumBytes) {
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + WrOff;
WrOff += NumBytes;
while (NumBytes--) {
*pDst++ = *pData++;
};
pRing->WrOff = WrOff;
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + WrOff, pData, NumBytes);
pRing->WrOff = WrOff + NumBytes;
#endif
return 1;
}
//
// If data did not fit into space until wrap around calculate complete space in buffer.
//
Avail += RdOff;
//
// If there is still no space for the whole of this output, don't bother.
//
if (Avail >= NumBytes) {
//
// OK, we have enough space in buffer. Copy in one or 2 chunks
//
Rem = pRing->SizeOfBuffer - WrOff; // Space until end of buffer
if (Rem > NumBytes) {
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + WrOff;
WrOff += NumBytes;
while (NumBytes--) {
*pDst++ = *pData++;
};
pRing->WrOff = WrOff;
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + WrOff, pData, NumBytes);
pRing->WrOff = WrOff + NumBytes;
#endif
} else {
//
// We reach the end of the buffer, so need to wrap around
//
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + WrOff;
NumBytes -= Rem;
WrOff = NumBytes;
do {
*pDst++ = *pData++;
} while (--Rem);
pDst = pRing->pBuffer;
while (NumBytes--) {
*pDst++ = *pData++;
};
pRing->WrOff = WrOff;
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + WrOff, pData, Rem);
SEGGER_RTT_MEMCPY(pRing->pBuffer, pData + Rem, NumBytes - Rem);
pRing->WrOff = NumBytes - Rem;
#endif
}
return 1;
}
} else {
Avail = RdOff - WrOff - 1u;
if (Avail >= NumBytes) {
#if SEGGER_RTT_MEMCPY_USE_BYTELOOP
pDst = pRing->pBuffer + WrOff;
WrOff += NumBytes;
while (NumBytes--) {
*pDst++ = *pData++;
};
pRing->WrOff = WrOff;
#else
SEGGER_RTT_MEMCPY(pRing->pBuffer + WrOff, pData, NumBytes);
pRing->WrOff = WrOff + NumBytes;
#endif
return 1;
}
}
//
// If we reach this point no data has been written
//
return 0;
}
/*********************************************************************
*
* SEGGER_RTT_WriteNoLock
*
* Function description
* Stores a specified number of characters in SEGGER RTT
* control block which is then read by the host.
* SEGGER_RTT_WriteNoLock does not lock the application.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* pBuffer Pointer to character array. Does not need to point to a \0 terminated string.
* NumBytes Number of bytes to be stored in the SEGGER RTT control block.
*
* Return value
* Number of bytes which have been stored in the "Up"-buffer.
*
* Notes
* (1) Data is stored according to buffer flags.
* (2) For performance reasons this function does not call Init()
* and may only be called after RTT has been initialized.
* Either by calling SEGGER_RTT_Init() or calling another RTT API function first.
*/
unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) {
unsigned Status;
unsigned Avail;
const char* pData;
SEGGER_RTT_BUFFER_UP* pRing;
pData = (const char *)pBuffer;
//
// Get "to-host" ring buffer.
//
pRing = &_SEGGER_RTT.aUp[BufferIndex];
//
// How we output depends upon the mode...
//
switch (pRing->Flags) {
case SEGGER_RTT_MODE_NO_BLOCK_SKIP:
//
// If we are in skip mode and there is no space for the whole
// of this output, don't bother.
//
Avail = _GetAvailWriteSpace(pRing);
if (Avail < NumBytes) {
Status = 0u;
} else {
Status = NumBytes;
_WriteNoCheck(pRing, pData, NumBytes);
}
break;
case SEGGER_RTT_MODE_NO_BLOCK_TRIM:
//
// If we are in trim mode, trim to what we can output without blocking.
//
Avail = _GetAvailWriteSpace(pRing);
Status = Avail < NumBytes ? Avail : NumBytes;
_WriteNoCheck(pRing, pData, Status);
break;
case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL:
//
// If we are in blocking mode, output everything.
//
Status = _WriteBlocking(pRing, pData, NumBytes);
break;
default:
Status = 0u;
break;
}
//
// Finish up.
//
return Status;
}
/*********************************************************************
*
* SEGGER_RTT_Write
*
* Function description
* Stores a specified number of characters in SEGGER RTT
* control block which is then read by the host.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* pBuffer Pointer to character array. Does not need to point to a \0 terminated string.
* NumBytes Number of bytes to be stored in the SEGGER RTT control block.
*
* Return value
* Number of bytes which have been stored in the "Up"-buffer.
*
* Notes
* (1) Data is stored according to buffer flags.
*/
unsigned SEGGER_RTT_Write(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) {
unsigned Status;
//
INIT();
SEGGER_RTT_LOCK();
//
// Call the non-locking write function
//
Status = SEGGER_RTT_WriteNoLock(BufferIndex, pBuffer, NumBytes);
//
// Finish up.
//
SEGGER_RTT_UNLOCK();
//
return Status;
}
/*********************************************************************
*
* SEGGER_RTT_WriteString
*
* Function description
* Stores string in SEGGER RTT control block.
* This data is read by the host.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* s Pointer to string.
*
* Return value
* Number of bytes which have been stored in the "Up"-buffer.
*
* Notes
* (1) Data is stored according to buffer flags.
* (2) String passed to this function has to be \0 terminated
* (3) \0 termination character is *not* stored in RTT buffer
*/
unsigned SEGGER_RTT_WriteString(unsigned BufferIndex, const char* s) {
unsigned Len;
Len = STRLEN(s);
return SEGGER_RTT_Write(BufferIndex, s, Len);
}
/*********************************************************************
*
* SEGGER_RTT_PutCharSkipNoLock
*
* Function description
* Stores a single character/byte in SEGGER RTT buffer.
* SEGGER_RTT_PutCharSkipNoLock does not lock the application and
* skips the byte, if it does not fit into the buffer.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* c Byte to be stored.
*
* Return value
* Number of bytes which have been stored in the "Up"-buffer.
*
* Notes
* (1) If there is not enough space in the "Up"-buffer, the character is dropped.
* (2) For performance reasons this function does not call Init()
* and may only be called after RTT has been initialized.
* Either by calling SEGGER_RTT_Init() or calling another RTT API function first.
*/
unsigned SEGGER_RTT_PutCharSkipNoLock(unsigned BufferIndex, char c) {
SEGGER_RTT_BUFFER_UP* pRing;
unsigned WrOff;
unsigned Status;
//
// Get "to-host" ring buffer.
//
pRing = &_SEGGER_RTT.aUp[BufferIndex];
//
// Get write position and handle wrap-around if necessary
//
WrOff = pRing->WrOff + 1;
if (WrOff == pRing->SizeOfBuffer) {
WrOff = 0;
}
//
// Output byte if free space is available
//
if (WrOff != pRing->RdOff) {
pRing->pBuffer[pRing->WrOff] = c;
pRing->WrOff = WrOff;
Status = 1;
} else {
Status = 0;
}
//
return Status;
}
/*********************************************************************
*
* SEGGER_RTT_PutCharSkip
*
* Function description
* Stores a single character/byte in SEGGER RTT buffer.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* c Byte to be stored.
*
* Return value
* Number of bytes which have been stored in the "Up"-buffer.
*
* Notes
* (1) If there is not enough space in the "Up"-buffer, the character is dropped.
*/
unsigned SEGGER_RTT_PutCharSkip(unsigned BufferIndex, char c) {
SEGGER_RTT_BUFFER_UP* pRing;
unsigned WrOff;
unsigned Status;
//
// Prepare
//
INIT();
SEGGER_RTT_LOCK();
//
// Get "to-host" ring buffer.
//
pRing = &_SEGGER_RTT.aUp[BufferIndex];
//
// Get write position and handle wrap-around if necessary
//
WrOff = pRing->WrOff + 1;
if (WrOff == pRing->SizeOfBuffer) {
WrOff = 0;
}
//
// Output byte if free space is available
//
if (WrOff != pRing->RdOff) {
pRing->pBuffer[pRing->WrOff] = c;
pRing->WrOff = WrOff;
Status = 1;
} else {
Status = 0;
}
//
// Finish up.
//
SEGGER_RTT_UNLOCK();
//
return Status;
}
/*********************************************************************
*
* SEGGER_RTT_PutChar
*
* Function description
* Stores a single character/byte in SEGGER RTT buffer.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
* c Byte to be stored.
*
* Return value
* Number of bytes which have been stored in the "Up"-buffer.
*
* Notes
* (1) Data is stored according to buffer flags.
*/
unsigned SEGGER_RTT_PutChar(unsigned BufferIndex, char c) {
SEGGER_RTT_BUFFER_UP* pRing;
unsigned WrOff;
unsigned Status;
//
// Prepare
//
INIT();
SEGGER_RTT_LOCK();
//
// Get "to-host" ring buffer.
//
pRing = &_SEGGER_RTT.aUp[BufferIndex];
//
// Get write position and handle wrap-around if necessary
//
WrOff = pRing->WrOff + 1;
if (WrOff == pRing->SizeOfBuffer) {
WrOff = 0;
}
//
// Wait for free space if mode is set to blocking
//
if (pRing->Flags == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) {
while (WrOff == pRing->RdOff) {
;
}
}
//
// Output byte if free space is available
//
if (WrOff != pRing->RdOff) {
pRing->pBuffer[pRing->WrOff] = c;
pRing->WrOff = WrOff;
Status = 1;
} else {
Status = 0;
}
//
// Finish up.
//
SEGGER_RTT_UNLOCK();
//
return Status;
}
/*********************************************************************
*
* SEGGER_RTT_GetKey
*
* Function description
* Reads one character from the SEGGER RTT buffer.
* Host has previously stored data there.
*
* Return value
* < 0 - No character available (buffer empty).
* >= 0 - Character which has been read. (Possible values: 0 - 255)
*
* Notes
* (1) This function is only specified for accesses to RTT buffer 0.
*/
int SEGGER_RTT_GetKey(void) {
char c;
int r;
r = (int)SEGGER_RTT_Read(0u, &c, 1u);
if (r == 1) {
r = (int)(unsigned char)c;
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_WaitKey
*
* Function description
* Waits until at least one character is avaible in the SEGGER RTT buffer.
* Once a character is available, it is read and this function returns.
*
* Return value
* >=0 - Character which has been read.
*
* Notes
* (1) This function is only specified for accesses to RTT buffer 0
* (2) This function is blocking if no character is present in RTT buffer
*/
int SEGGER_RTT_WaitKey(void) {
int r;
do {
r = SEGGER_RTT_GetKey();
} while (r < 0);
return r;
}
/*********************************************************************
*
* SEGGER_RTT_HasKey
*
* Function description
* Checks if at least one character for reading is available in the SEGGER RTT buffer.
*
* Return value
* == 0 - No characters are available to read.
* == 1 - At least one character is available.
*
* Notes
* (1) This function is only specified for accesses to RTT buffer 0
*/
int SEGGER_RTT_HasKey(void) {
unsigned RdOff;
int r;
INIT();
RdOff = _SEGGER_RTT.aDown[0].RdOff;
if (RdOff != _SEGGER_RTT.aDown[0].WrOff) {
r = 1;
} else {
r = 0;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_HasData
*
* Function description
* Check if there is data from the host in the given buffer.
*
* Return value:
* ==0: No data
* !=0: Data in buffer
*
*/
unsigned SEGGER_RTT_HasData(unsigned BufferIndex) {
SEGGER_RTT_BUFFER_DOWN* pRing;
unsigned v;
pRing = &_SEGGER_RTT.aDown[BufferIndex];
v = pRing->WrOff;
return v - pRing->RdOff;
}
/*********************************************************************
*
* SEGGER_RTT_HasDataUp
*
* Function description
* Check if there is data remaining to be sent in the given buffer.
*
* Return value:
* ==0: No data
* !=0: Data in buffer
*
*/
unsigned SEGGER_RTT_HasDataUp(unsigned BufferIndex) {
SEGGER_RTT_BUFFER_UP* pRing;
unsigned v;
pRing = &_SEGGER_RTT.aUp[BufferIndex];
v = pRing->RdOff;
return pRing->WrOff - v;
}
/*********************************************************************
*
* SEGGER_RTT_AllocDownBuffer
*
* Function description
* Run-time configuration of the next down-buffer (H->T).
* The next buffer, which is not used yet is configured.
* This includes: Buffer address, size, name, flags, ...
*
* Parameters
* sName Pointer to a constant name string.
* pBuffer Pointer to a buffer to be used.
* BufferSize Size of the buffer.
* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message).
*
* Return value
* >= 0 - O.K. Buffer Index
* < 0 - Error
*/
int SEGGER_RTT_AllocDownBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) {
int BufferIndex;
INIT();
SEGGER_RTT_LOCK();
BufferIndex = 0;
do {
if (_SEGGER_RTT.aDown[BufferIndex].pBuffer == NULL) {
break;
}
BufferIndex++;
} while (BufferIndex < _SEGGER_RTT.MaxNumDownBuffers);
if (BufferIndex < _SEGGER_RTT.MaxNumDownBuffers) {
_SEGGER_RTT.aDown[BufferIndex].sName = sName;
_SEGGER_RTT.aDown[BufferIndex].pBuffer = (char*)pBuffer;
_SEGGER_RTT.aDown[BufferIndex].SizeOfBuffer = BufferSize;
_SEGGER_RTT.aDown[BufferIndex].RdOff = 0u;
_SEGGER_RTT.aDown[BufferIndex].WrOff = 0u;
_SEGGER_RTT.aDown[BufferIndex].Flags = Flags;
} else {
BufferIndex = -1;
}
SEGGER_RTT_UNLOCK();
return BufferIndex;
}
/*********************************************************************
*
* SEGGER_RTT_AllocUpBuffer
*
* Function description
* Run-time configuration of the next up-buffer (T->H).
* The next buffer, which is not used yet is configured.
* This includes: Buffer address, size, name, flags, ...
*
* Parameters
* sName Pointer to a constant name string.
* pBuffer Pointer to a buffer to be used.
* BufferSize Size of the buffer.
* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message).
*
* Return value
* >= 0 - O.K. Buffer Index
* < 0 - Error
*/
int SEGGER_RTT_AllocUpBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) {
int BufferIndex;
INIT();
SEGGER_RTT_LOCK();
BufferIndex = 0;
do {
if (_SEGGER_RTT.aUp[BufferIndex].pBuffer == NULL) {
break;
}
BufferIndex++;
} while (BufferIndex < _SEGGER_RTT.MaxNumUpBuffers);
if (BufferIndex < _SEGGER_RTT.MaxNumUpBuffers) {
_SEGGER_RTT.aUp[BufferIndex].sName = sName;
_SEGGER_RTT.aUp[BufferIndex].pBuffer = (char*)pBuffer;
_SEGGER_RTT.aUp[BufferIndex].SizeOfBuffer = BufferSize;
_SEGGER_RTT.aUp[BufferIndex].RdOff = 0u;
_SEGGER_RTT.aUp[BufferIndex].WrOff = 0u;
_SEGGER_RTT.aUp[BufferIndex].Flags = Flags;
} else {
BufferIndex = -1;
}
SEGGER_RTT_UNLOCK();
return BufferIndex;
}
/*********************************************************************
*
* SEGGER_RTT_ConfigUpBuffer
*
* Function description
* Run-time configuration of a specific up-buffer (T->H).
* Buffer to be configured is specified by index.
* This includes: Buffer address, size, name, flags, ...
*
* Parameters
* BufferIndex Index of the buffer to configure.
* sName Pointer to a constant name string.
* pBuffer Pointer to a buffer to be used.
* BufferSize Size of the buffer.
* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message).
*
* Return value
* >= 0 - O.K.
* < 0 - Error
*
* Additional information
* Buffer 0 is configured on compile-time.
* May only be called once per buffer.
* Buffer name and flags can be reconfigured using the appropriate functions.
*/
int SEGGER_RTT_ConfigUpBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) {
int r;
INIT();
if (BufferIndex < (unsigned)_SEGGER_RTT.MaxNumUpBuffers) {
SEGGER_RTT_LOCK();
if (BufferIndex > 0u) {
_SEGGER_RTT.aUp[BufferIndex].sName = sName;
_SEGGER_RTT.aUp[BufferIndex].pBuffer = (char*)pBuffer;
_SEGGER_RTT.aUp[BufferIndex].SizeOfBuffer = BufferSize;
_SEGGER_RTT.aUp[BufferIndex].RdOff = 0u;
_SEGGER_RTT.aUp[BufferIndex].WrOff = 0u;
}
_SEGGER_RTT.aUp[BufferIndex].Flags = Flags;
SEGGER_RTT_UNLOCK();
r = 0;
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_ConfigDownBuffer
*
* Function description
* Run-time configuration of a specific down-buffer (H->T).
* Buffer to be configured is specified by index.
* This includes: Buffer address, size, name, flags, ...
*
* Parameters
* BufferIndex Index of the buffer to configure.
* sName Pointer to a constant name string.
* pBuffer Pointer to a buffer to be used.
* BufferSize Size of the buffer.
* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message).
*
* Return value
* >= 0 O.K.
* < 0 Error
*
* Additional information
* Buffer 0 is configured on compile-time.
* May only be called once per buffer.
* Buffer name and flags can be reconfigured using the appropriate functions.
*/
int SEGGER_RTT_ConfigDownBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) {
int r;
INIT();
if (BufferIndex < (unsigned)_SEGGER_RTT.MaxNumDownBuffers) {
SEGGER_RTT_LOCK();
if (BufferIndex > 0u) {
_SEGGER_RTT.aDown[BufferIndex].sName = sName;
_SEGGER_RTT.aDown[BufferIndex].pBuffer = (char*)pBuffer;
_SEGGER_RTT.aDown[BufferIndex].SizeOfBuffer = BufferSize;
_SEGGER_RTT.aDown[BufferIndex].RdOff = 0u;
_SEGGER_RTT.aDown[BufferIndex].WrOff = 0u;
}
_SEGGER_RTT.aDown[BufferIndex].Flags = Flags;
SEGGER_RTT_UNLOCK();
r = 0;
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_SetNameUpBuffer
*
* Function description
* Run-time configuration of a specific up-buffer name (T->H).
* Buffer to be configured is specified by index.
*
* Parameters
* BufferIndex Index of the buffer to renamed.
* sName Pointer to a constant name string.
*
* Return value
* >= 0 O.K.
* < 0 Error
*/
int SEGGER_RTT_SetNameUpBuffer(unsigned BufferIndex, const char* sName) {
int r;
INIT();
if (BufferIndex < (unsigned)_SEGGER_RTT.MaxNumUpBuffers) {
SEGGER_RTT_LOCK();
_SEGGER_RTT.aUp[BufferIndex].sName = sName;
SEGGER_RTT_UNLOCK();
r = 0;
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_SetNameDownBuffer
*
* Function description
* Run-time configuration of a specific Down-buffer name (T->H).
* Buffer to be configured is specified by index.
*
* Parameters
* BufferIndex Index of the buffer to renamed.
* sName Pointer to a constant name string.
*
* Return value
* >= 0 O.K.
* < 0 Error
*/
int SEGGER_RTT_SetNameDownBuffer(unsigned BufferIndex, const char* sName) {
int r;
INIT();
if (BufferIndex < (unsigned)_SEGGER_RTT.MaxNumDownBuffers) {
SEGGER_RTT_LOCK();
_SEGGER_RTT.aDown[BufferIndex].sName = sName;
SEGGER_RTT_UNLOCK();
r = 0;
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_SetFlagsUpBuffer
*
* Function description
* Run-time configuration of specific up-buffer flags (T->H).
* Buffer to be configured is specified by index.
*
* Parameters
* BufferIndex Index of the buffer.
* Flags Flags to set for the buffer.
*
* Return value
* >= 0 O.K.
* < 0 Error
*/
int SEGGER_RTT_SetFlagsUpBuffer(unsigned BufferIndex, unsigned Flags) {
int r;
INIT();
if (BufferIndex < (unsigned)_SEGGER_RTT.MaxNumUpBuffers) {
SEGGER_RTT_LOCK();
_SEGGER_RTT.aUp[BufferIndex].Flags = Flags;
SEGGER_RTT_UNLOCK();
r = 0;
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_SetFlagsDownBuffer
*
* Function description
* Run-time configuration of specific Down-buffer flags (T->H).
* Buffer to be configured is specified by index.
*
* Parameters
* BufferIndex Index of the buffer to renamed.
* Flags Flags to set for the buffer.
*
* Return value
* >= 0 O.K.
* < 0 Error
*/
int SEGGER_RTT_SetFlagsDownBuffer(unsigned BufferIndex, unsigned Flags) {
int r;
INIT();
if (BufferIndex < (unsigned)_SEGGER_RTT.MaxNumDownBuffers) {
SEGGER_RTT_LOCK();
_SEGGER_RTT.aDown[BufferIndex].Flags = Flags;
SEGGER_RTT_UNLOCK();
r = 0;
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_Init
*
* Function description
* Initializes the RTT Control Block.
* Should be used in RAM targets, at start of the application.
*
*/
void SEGGER_RTT_Init (void) {
_DoInit();
}
/*********************************************************************
*
* SEGGER_RTT_SetTerminal
*
* Function description
* Sets the terminal to be used for output on channel 0.
*
* Parameters
* TerminalId Index of the terminal.
*
* Return value
* >= 0 O.K.
* < 0 Error (e.g. if RTT is configured for non-blocking mode and there was no space in the buffer to set the new terminal Id)
*/
int SEGGER_RTT_SetTerminal (char TerminalId) {
unsigned char ac[2];
SEGGER_RTT_BUFFER_UP* pRing;
unsigned Avail;
int r;
//
INIT();
//
r = 0;
ac[0] = 0xFFu;
if ((unsigned char)TerminalId < (unsigned char)sizeof(_aTerminalId)) { // We only support a certain number of channels
ac[1] = _aTerminalId[(unsigned char)TerminalId];
pRing = &_SEGGER_RTT.aUp[0]; // Buffer 0 is always reserved for terminal I/O, so we can use index 0 here, fixed
SEGGER_RTT_LOCK(); // Lock to make sure that no other task is writing into buffer, while we are and number of free bytes in buffer does not change downwards after checking and before writing
if ((pRing->Flags & SEGGER_RTT_MODE_MASK) == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) {
_ActiveTerminal = TerminalId;
_WriteBlocking(pRing, (const char*)ac, 2u);
} else { // Skipping mode or trim mode? => We cannot trim this command so handling is the same for both modes
Avail = _GetAvailWriteSpace(pRing);
if (Avail >= 2) {
_ActiveTerminal = TerminalId; // Only change active terminal in case of success
_WriteNoCheck(pRing, (const char*)ac, 2u);
} else {
r = -1;
}
}
SEGGER_RTT_UNLOCK();
} else {
r = -1;
}
return r;
}
/*********************************************************************
*
* SEGGER_RTT_TerminalOut
*
* Function description
* Writes a string to the given terminal
* without changing the terminal for channel 0.
*
* Parameters
* TerminalId Index of the terminal.
* s String to be printed on the terminal.
*
* Return value
* >= 0 - Number of bytes written.
* < 0 - Error.
*
*/
int SEGGER_RTT_TerminalOut (char TerminalId, const char* s) {
int Status;
unsigned FragLen;
unsigned Avail;
SEGGER_RTT_BUFFER_UP* pRing;
//
INIT();
//
// Validate terminal ID.
//
if (TerminalId < (char)sizeof(_aTerminalId)) { // We only support a certain number of channels
//
// Get "to-host" ring buffer.
//
pRing = &_SEGGER_RTT.aUp[0];
//
// Need to be able to change terminal, write data, change back.
// Compute the fixed and variable sizes.
//
FragLen = STRLEN(s);
//
// How we output depends upon the mode...
//
SEGGER_RTT_LOCK();
Avail = _GetAvailWriteSpace(pRing);
switch (pRing->Flags & SEGGER_RTT_MODE_MASK) {
case SEGGER_RTT_MODE_NO_BLOCK_SKIP:
//
// If we are in skip mode and there is no space for the whole
// of this output, don't bother switching terminals at all.
//
if (Avail < (FragLen + 4u)) {
Status = 0;
} else {
_PostTerminalSwitch(pRing, TerminalId);
Status = (int)_WriteBlocking(pRing, s, FragLen);
_PostTerminalSwitch(pRing, _ActiveTerminal);
}
break;
case SEGGER_RTT_MODE_NO_BLOCK_TRIM:
//
// If we are in trim mode and there is not enough space for everything,
// trim the output but always include the terminal switch. If no room
// for terminal switch, skip that totally.
//
if (Avail < 4u) {
Status = -1;
} else {
_PostTerminalSwitch(pRing, TerminalId);
Status = (int)_WriteBlocking(pRing, s, (FragLen < (Avail - 4u)) ? FragLen : (Avail - 4u));
_PostTerminalSwitch(pRing, _ActiveTerminal);
}
break;
case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL:
//
// If we are in blocking mode, output everything.
//
_PostTerminalSwitch(pRing, TerminalId);
Status = (int)_WriteBlocking(pRing, s, FragLen);
_PostTerminalSwitch(pRing, _ActiveTerminal);
break;
default:
Status = -1;
break;
}
//
// Finish up.
//
SEGGER_RTT_UNLOCK();
} else {
Status = -1;
}
return Status;
}
/*************************** End of file ****************************/
/*********************************************************************
* SEGGER Microcontroller GmbH *
* Solutions for real time microcontroller applications *
**********************************************************************
* *
* (c) 1995 - 2018 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER RTT * Real Time Transfer for embedded targets *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT_printf.c
Purpose : Replacement for printf to write formatted data via RTT
Revision: $Rev: 9599 $
----------------------------------------------------------------------
*/
#include "SEGGER_RTT.h"
#include "SEGGER_RTT_Conf.h"
/*********************************************************************
*
* Defines, configurable
*
**********************************************************************
*/
#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE
#define SEGGER_RTT_PRINTF_BUFFER_SIZE (64)
#endif
#include <stdlib.h>
#include <stdarg.h>
#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0)
#define FORMAT_FLAG_PAD_ZERO (1u << 1)
#define FORMAT_FLAG_PRINT_SIGN (1u << 2)
#define FORMAT_FLAG_ALTERNATE (1u << 3)
/*********************************************************************
*
* Types
*
**********************************************************************
*/
typedef struct {
char* pBuffer;
unsigned BufferSize;
unsigned Cnt;
int ReturnValue;
unsigned RTTBufferIndex;
} SEGGER_RTT_PRINTF_DESC;
/*********************************************************************
*
* Function prototypes
*
**********************************************************************
*/
int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList);
/*********************************************************************
*
* Static code
*
**********************************************************************
*/
/*********************************************************************
*
* _StoreChar
*/
static void _StoreChar(SEGGER_RTT_PRINTF_DESC * p, char c) {
unsigned Cnt;
Cnt = p->Cnt;
if ((Cnt + 1u) <= p->BufferSize) {
*(p->pBuffer + Cnt) = c;
p->Cnt = Cnt + 1u;
p->ReturnValue++;
}
//
// Write part of string, when the buffer is full
//
if (p->Cnt == p->BufferSize) {
if (SEGGER_RTT_Write(p->RTTBufferIndex, p->pBuffer, p->Cnt) != p->Cnt) {
p->ReturnValue = -1;
} else {
p->Cnt = 0u;
}
}
}
/*********************************************************************
*
* _PrintUnsigned
*/
static void _PrintUnsigned(SEGGER_RTT_PRINTF_DESC * pBufferDesc, unsigned v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) {
static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' };
unsigned Div;
unsigned Digit;
unsigned Number;
unsigned Width;
char c;
Number = v;
Digit = 1u;
//
// Get actual field width
//
Width = 1u;
while (Number >= Base) {
Number = (Number / Base);
Width++;
}
if (NumDigits > Width) {
Width = NumDigits;
}
//
// Print leading chars if necessary
//
if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) {
if (FieldWidth != 0u) {
if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) {
c = '0';
} else {
c = ' ';
}
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, c);
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
if (pBufferDesc->ReturnValue >= 0) {
//
// Compute Digit.
// Loop until Digit has the value of the highest digit required.
// Example: If the output is 345 (Base 10), loop 2 times until Digit is 100.
//
while (1) {
if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned)
NumDigits--;
} else {
Div = v / Digit;
if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done
break;
}
}
Digit *= Base;
}
//
// Output digits
//
do {
Div = v / Digit;
v -= Div * Digit;
_StoreChar(pBufferDesc, _aV2C[Div]);
if (pBufferDesc->ReturnValue < 0) {
break;
}
Digit /= Base;
} while (Digit);
//
// Print trailing spaces if necessary
//
if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) {
if (FieldWidth != 0u) {
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, ' ');
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
}
}
/*********************************************************************
*
* _PrintInt
*/
static void _PrintInt(SEGGER_RTT_PRINTF_DESC * pBufferDesc, int v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) {
unsigned Width;
int Number;
Number = (v < 0) ? -v : v;
//
// Get actual field width
//
Width = 1u;
while (Number >= (int)Base) {
Number = (Number / (int)Base);
Width++;
}
if (NumDigits > Width) {
Width = NumDigits;
}
if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) {
FieldWidth--;
}
//
// Print leading spaces if necessary
//
if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) {
if (FieldWidth != 0u) {
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, ' ');
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
//
// Print sign if necessary
//
if (pBufferDesc->ReturnValue >= 0) {
if (v < 0) {
v = -v;
_StoreChar(pBufferDesc, '-');
} else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) {
_StoreChar(pBufferDesc, '+');
} else {
}
if (pBufferDesc->ReturnValue >= 0) {
//
// Print leading zeros if necessary
//
if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) {
if (FieldWidth != 0u) {
while ((FieldWidth != 0u) && (Width < FieldWidth)) {
FieldWidth--;
_StoreChar(pBufferDesc, '0');
if (pBufferDesc->ReturnValue < 0) {
break;
}
}
}
}
if (pBufferDesc->ReturnValue >= 0) {
//
// Print number without sign
//
_PrintUnsigned(pBufferDesc, (unsigned)v, Base, NumDigits, FieldWidth, FormatFlags);
}
}
}
}
/*********************************************************************
*
* Public code
*
**********************************************************************
*/
/*********************************************************************
*
* SEGGER_RTT_vprintf
*
* Function description
* Stores a formatted string in SEGGER RTT control block.
* This data is read by the host.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal")
* sFormat Pointer to format string
* pParamList Pointer to the list of arguments for the format string
*
* Return values
* >= 0: Number of bytes which have been stored in the "Up"-buffer.
* < 0: Error
*/
int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList) {
char c;
SEGGER_RTT_PRINTF_DESC BufferDesc;
int v;
unsigned NumDigits;
unsigned FormatFlags;
unsigned FieldWidth;
char acBuffer[SEGGER_RTT_PRINTF_BUFFER_SIZE];
BufferDesc.pBuffer = acBuffer;
BufferDesc.BufferSize = SEGGER_RTT_PRINTF_BUFFER_SIZE;
BufferDesc.Cnt = 0u;
BufferDesc.RTTBufferIndex = BufferIndex;
BufferDesc.ReturnValue = 0;
do {
c = *sFormat;
sFormat++;
if (c == 0u) {
break;
}
if (c == '%') {
//
// Filter out flags
//
FormatFlags = 0u;
v = 1;
do {
c = *sFormat;
switch (c) {
case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break;
case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break;
case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break;
case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break;
default: v = 0; break;
}
} while (v);
//
// filter out field with
//
FieldWidth = 0u;
do {
c = *sFormat;
if ((c < '0') || (c > '9')) {
break;
}
sFormat++;
FieldWidth = (FieldWidth * 10u) + ((unsigned)c - '0');
} while (1);
//
// Filter out precision (number of digits to display)
//
NumDigits = 0u;
c = *sFormat;
if (c == '.') {
sFormat++;
do {
c = *sFormat;
if ((c < '0') || (c > '9')) {
break;
}
sFormat++;
NumDigits = NumDigits * 10u + ((unsigned)c - '0');
} while (1);
}
//
// Filter out length modifier
//
c = *sFormat;
do {
if ((c == 'l') || (c == 'h')) {
sFormat++;
c = *sFormat;
} else {
break;
}
} while (1);
//
// Handle specifiers
//
switch (c) {
case 'c': {
char c0;
v = va_arg(*pParamList, int);
c0 = (char)v;
_StoreChar(&BufferDesc, c0);
break;
}
case 'd':
v = va_arg(*pParamList, int);
_PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags);
break;
case 'u':
v = va_arg(*pParamList, int);
_PrintUnsigned(&BufferDesc, (unsigned)v, 10u, NumDigits, FieldWidth, FormatFlags);
break;
case 'x':
case 'X':
v = va_arg(*pParamList, int);
_PrintUnsigned(&BufferDesc, (unsigned)v, 16u, NumDigits, FieldWidth, FormatFlags);
break;
case 's':
{
const char * s = va_arg(*pParamList, const char *);
do {
c = *s;
s++;
if (c == '\0') {
break;
}
_StoreChar(&BufferDesc, c);
} while (BufferDesc.ReturnValue >= 0);
}
break;
case 'p':
v = va_arg(*pParamList, int);
_PrintUnsigned(&BufferDesc, (unsigned)v, 16u, 8u, 8u, 0u);
break;
case '%':
_StoreChar(&BufferDesc, '%');
break;
default:
break;
}
sFormat++;
} else {
_StoreChar(&BufferDesc, c);
}
} while (BufferDesc.ReturnValue >= 0);
if (BufferDesc.ReturnValue > 0) {
//
// Write remaining data, if any
//
if (BufferDesc.Cnt != 0u) {
SEGGER_RTT_Write(BufferIndex, acBuffer, BufferDesc.Cnt);
}
BufferDesc.ReturnValue += (int)BufferDesc.Cnt;
}
return BufferDesc.ReturnValue;
}
/*********************************************************************
*
* SEGGER_RTT_printf
*
* Function description
* Stores a formatted string in SEGGER RTT control block.
* This data is read by the host.
*
* Parameters
* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal")
* sFormat Pointer to format string, followed by the arguments for conversion
*
* Return values
* >= 0: Number of bytes which have been stored in the "Up"-buffer.
* < 0: Error
*
* Notes
* (1) Conversion specifications have following syntax:
* %[flags][FieldWidth][.Precision]ConversionSpecifier
* (2) Supported flags:
* -: Left justify within the field width
* +: Always print sign extension for signed conversions
* 0: Pad with 0 instead of spaces. Ignored when using '-'-flag or precision
* Supported conversion specifiers:
* c: Print the argument as one char
* d: Print the argument as a signed integer
* u: Print the argument as an unsigned integer
* x: Print the argument as an hexadecimal integer
* s: Print the string pointed to by the argument
* p: Print the argument as an 8-digit hexadecimal integer. (Argument shall be a pointer to void.)
*/
int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...) {
int r;
va_list ParamList;
va_start(ParamList, sFormat);
r = SEGGER_RTT_vprintf(BufferIndex, sFormat, &ParamList);
va_end(ParamList);
return r;
}
/*************************** End of file ****************************/
......@@ -20,36 +20,10 @@
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include <stdint.h>
#include "crypto_aead.h"
#include "api.h"
//#define DEBUG
#define MAX_LEN 1400
#ifdef DEBUG
#include "SEGGER_RTT.h"
#include "SEGGER_RTT_Conf.h"
#define dbg_printf(...) SEGGER_RTT_printf(0, __VA_ARGS__)
#endif
unsigned char c[MAX_LEN];
unsigned long long clen = 0;
unsigned char m[MAX_LEN];
unsigned long long mlen = 0;
unsigned char ad[MAX_LEN];
unsigned long long adlen = 0;
unsigned char text[2] = "OK";
unsigned char nsec[CRYPTO_NSECBYTES];
const unsigned long long nslen = CRYPTO_NSECBYTES;
unsigned char npub[CRYPTO_NPUBBYTES];
const unsigned long long nplen = CRYPTO_NPUBBYTES;
unsigned char k[CRYPTO_KEYBYTES];
const unsigned long long klen = CRYPTO_KEYBYTES;
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "test.h"
/* USER CODE END Includes */
......@@ -70,8 +44,6 @@ const unsigned long long klen = CRYPTO_KEYBYTES;
/* Private variables ---------------------------------------------------------*/
PCD_HandleTypeDef hpcd_USB_OTG_FS;
/* USER CODE BEGIN PV */
/* USER CODE END PV */
......@@ -79,89 +51,16 @@ PCD_HandleTypeDef hpcd_USB_OTG_FS;
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART2_Init(void);
static void read_variable_serial(unsigned char action);
static void write_variable_serial(unsigned char target[], uint32_t len);
static void read_serial(void *dst, unsigned int len) {
unsigned char *buf = dst;
#ifdef DEBUG
dbg_printf("Reading %d serial bytes\n", len);
#endif
for (int i = 0; i < len; i++) {
while (!LL_USART_IsActiveFlag_RXNE(USART2));
buf[i] = LL_USART_ReceiveData8(USART2);
}
#ifdef DEBUG
dbg_printf("done.\n", len);
#endif
}
static void MX_USART2_UART_Init(void);
static void MX_USART3_UART_Init(void);
/* USER CODE BEGIN PFP */
static void write_serial(const void *src, unsigned int len) {
const unsigned char *buf = src;
for (int i = 0; i < len; i++) {
#ifdef DEBUG
dbg_printf("Write to serial: %02x\n", buf[i]);
#endif
while (!(LL_USART_IsActiveFlag_TXE(USART2)));
LL_USART_TransmitData8(USART2, buf[i]);
#ifdef DEBUG
dbg_printf("Done writing!\n");
#endif
}
}
/* USER CODE END PFP */
static void read_variable_serial(unsigned char action) {
uint32_t len;
#ifdef DEBUG
dbg_printf("Let's read our variable: %c\n", action);
#endif
read_serial(&len, sizeof(len));
#ifdef DEBUG
dbg_printf("with length %lu \n", len);
#endif
switch(action) {
case 'k':
while (len != CRYPTO_KEYBYTES);
read_serial(k, len);
break;
case 'p':
if (len != CRYPTO_NPUBBYTES) {
#ifdef DEBUG
dbg_printf("Assert failed %d != %d\n", len, CRYPTO_NPUBBYTES);
#endif
for(;;);
}
read_serial(npub, len);
break;
case 's':
while (len != CRYPTO_NSECBYTES);
read_serial(nsec, len);
break;
case 'a':
while (len > MAX_LEN);
adlen = len;
read_serial(ad, len);
break;
case 'm':
while (len > MAX_LEN);
mlen = len;
read_serial(m, len);
break;
case 'c':
while (len > MAX_LEN);
clen = len;
read_serial(c, len);
break;
default:
for (;;);
}
}
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
static void write_variable_serial(unsigned char target[], uint32_t len) {
write_serial(&len, sizeof(len));
write_serial(target, len);
}
/* USER CODE END 0 */
/**
* @brief The application entry point.
......@@ -177,10 +76,15 @@ int main(void)
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
/* System interrupt init*/
/* USER CODE BEGIN Init */
/* USER CODE END Init */
......@@ -191,76 +95,27 @@ int main(void)
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
SEGGER_RTT_Init();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART2_Init();
MX_USART2_UART_Init();
MX_USART3_UART_Init();
/* USER CODE BEGIN 2 */
test_setup();
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
unsigned char rcv;
int res;
while (1) {
#ifdef DEBUG
dbg_printf("Starting to read form serial..");
#endif
read_serial(&rcv, 1);
#ifdef DEBUG
dbg_printf("Received action: %c\n", rcv);
#endif
switch (rcv) {
case 'c':
case 'm':
case 'a':
case 'k':
case 's':
case 'p':
read_variable_serial(rcv);
break;
case 'C': write_variable_serial(c, clen); break;
case 'M': write_variable_serial(m, mlen); break;
case 'A': write_variable_serial(ad, adlen); break;
case 'K': write_variable_serial(k, klen); break;
case 'S': write_variable_serial(nsec, nslen); break;
case 'P': write_variable_serial(npub, nplen); break;
case 'e':
#ifdef DEBUG
dbg_printf("m: "); for (int i = 0; i < mlen; i++) dbg_printf("%02x", m[i]); dbg_printf("\n");
dbg_printf("a: "); for (int i = 0; i < adlen; i++) dbg_printf("%02x", ad[i]); dbg_printf("\n");
dbg_printf("p: "); for (int i = 0; i < nplen; i++) dbg_printf("%02x", npub[i]); dbg_printf("\n");
dbg_printf("k: "); for (int i = 0; i < klen; i++) dbg_printf("%02x", k[i]); dbg_printf("\n");
#endif
LL_GPIO_TogglePin(GPIOB, LL_GPIO_PIN_7);
res = crypto_aead_encrypt(c, &clen, m, mlen, ad, adlen, nsec, npub, k);
LL_GPIO_TogglePin(GPIOB, LL_GPIO_PIN_7);
break;
case 'd':
#ifdef DEBUG
dbg_printf("m: "); for (int i = 0; i < mlen; i++) dbg_printf("%02x", m[i]); dbg_printf("\n");
dbg_printf("a: "); for (int i = 0; i < adlen; i++) dbg_printf("%02x", ad[i]); dbg_printf("\n");
dbg_printf("p: "); for (int i = 0; i < nplen; i++) dbg_printf("%02x", npub[i]); dbg_printf("\n");
dbg_printf("k: "); for (int i = 0; i < klen; i++) dbg_printf("%02x", k[i]); dbg_printf("\n");
#endif
LL_GPIO_TogglePin(GPIOB, LL_GPIO_PIN_12);
res = crypto_aead_decrypt(m, &mlen, nsec, c, clen, ad, adlen, npub, k);
LL_GPIO_TogglePin(GPIOB, LL_GPIO_PIN_12);
break;
default:
continue;
}
/* USER CODE END WHILE */
}
while (1)
{
test_loop();
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
/**
* @brief System Clock Configuration
* @retval None
......@@ -284,7 +139,6 @@ void SystemClock_Config(void)
}
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_4, 72, LL_RCC_PLLP_DIV_2);
LL_RCC_PLL_ConfigDomain_48M(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_4, 72, LL_RCC_PLLQ_DIV_3);
LL_RCC_PLL_Enable();
/* Wait till PLL is ready */
......@@ -305,8 +159,8 @@ void SystemClock_Config(void)
LL_Init1msTick(72000000);
LL_SYSTICK_SetClkSource(LL_SYSTICK_CLKSOURCE_HCLK);
LL_SetSystemCoreClock(72000000);
LL_RCC_SetUSBClockSource(LL_RCC_USB_CLKSOURCE_PLL);
LL_RCC_SetUSARTClockSource(LL_RCC_USART2_CLKSOURCE_PCLK1);
LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK1);
}
/**
......@@ -314,7 +168,7 @@ void SystemClock_Config(void)
* @param None
* @retval None
*/
static void MX_USART2_Init(void)
static void MX_USART2_UART_Init(void)
{
/* USER CODE BEGIN USART2_Init 0 */
......@@ -370,6 +224,65 @@ static void MX_USART2_Init(void)
}
/**
* @brief USART3 Initialization Function
* @param None
* @retval None
*/
static void MX_USART3_UART_Init(void)
{
/* USER CODE BEGIN USART3_Init 0 */
/* USER CODE END USART3_Init 0 */
LL_USART_InitTypeDef USART_InitStruct = {0};
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
/* Peripheral clock enable */
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
/**USART3 GPIO Configuration
PD8 ------> USART3_TX
PD9 ------> USART3_RX
*/
GPIO_InitStruct.Pin = STLK_RX_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
LL_GPIO_Init(STLK_RX_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = STLK_TX_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
LL_GPIO_Init(STLK_TX_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN USART3_Init 1 */
/* USER CODE END USART3_Init 1 */
USART_InitStruct.BaudRate = 115200;
USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
USART_InitStruct.Parity = LL_USART_PARITY_NONE;
USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
LL_USART_Init(USART3, &USART_InitStruct);
LL_USART_ConfigAsyncMode(USART3);
LL_USART_Enable(USART3);
/* USER CODE BEGIN USART3_Init 2 */
/* USER CODE END USART3_Init 2 */
}
/**
* @brief GPIO Initialization Function
* @param None
* @retval None
......@@ -380,14 +293,12 @@ static void MX_GPIO_Init(void)
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOE);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOF);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOH);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOG);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD);
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOG);
/**/
LL_GPIO_ResetOutputPin(LD1_GPIO_Port, LD1_Pin);
......@@ -402,106 +313,20 @@ static void MX_GPIO_Init(void)
LL_GPIO_ResetOutputPin(LD2_GPIO_Port, LD2_Pin);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_2;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_3;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_4;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_0;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_1;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_2;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_3;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_4;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_7;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_8;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTC, LL_SYSCFG_EXTI_LINE13);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_9;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_13;
EXTI_InitStruct.LineCommand = ENABLE;
EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_RISING;
LL_EXTI_Init(&EXTI_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_10;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
LL_GPIO_SetPinPull(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_PULL_NO);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_0;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
LL_GPIO_SetPinMode(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_MODE_INPUT);
/**/
GPIO_InitStruct.Pin = RMII_MDC_Pin;
......@@ -513,24 +338,6 @@ static void MX_GPIO_Init(void)
LL_GPIO_Init(RMII_MDC_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_2;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_3;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_0;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = RMII_REF_CLK_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
......@@ -549,24 +356,6 @@ static void MX_GPIO_Init(void)
LL_GPIO_Init(RMII_MDIO_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_4;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = RMII_CRS_DV_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
......@@ -602,132 +391,6 @@ static void MX_GPIO_Init(void)
LL_GPIO_Init(LD1_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_1;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_2;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_11;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_12;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_13;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_14;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_0;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_1;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_7;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_8;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_9;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_10;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_11;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_12;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_13;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_14;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_10;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_11;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_12;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = RMII_TXD1_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
......@@ -745,90 +408,6 @@ static void MX_GPIO_Init(void)
LL_GPIO_Init(LD3_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = STLK_RX_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
LL_GPIO_Init(STLK_RX_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = STLK_TX_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
LL_GPIO_Init(STLK_TX_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_10;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_11;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_12;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_13;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_14;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_2;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_3;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_4;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = USB_PowerSwitchOn_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
......@@ -843,115 +422,46 @@ static void MX_GPIO_Init(void)
LL_GPIO_Init(USB_OverCurrent_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_8;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_7;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_8;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_9;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_10;
GPIO_InitStruct.Pin = USB_SOF_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct.Alternate = LL_GPIO_AF_8;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_11;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_12;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_0;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_1;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_2;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_3;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_4;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
GPIO_InitStruct.Alternate = LL_GPIO_AF_10;
LL_GPIO_Init(USB_SOF_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pin = USB_VBUS_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
LL_GPIO_Init(USB_VBUS_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_7;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pin = USB_ID_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOD, &GPIO_InitStruct);
GPIO_InitStruct.Alternate = LL_GPIO_AF_10;
LL_GPIO_Init(USB_ID_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_9;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pin = USB_DM_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
GPIO_InitStruct.Alternate = LL_GPIO_AF_10;
LL_GPIO_Init(USB_DM_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_10;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pin = USB_DP_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
GPIO_InitStruct.Alternate = LL_GPIO_AF_10;
LL_GPIO_Init(USB_DP_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = RMII_TX_EN_Pin;
......@@ -963,12 +473,6 @@ static void MX_GPIO_Init(void)
LL_GPIO_Init(RMII_TX_EN_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_12;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = RMII_TXD0_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
......@@ -978,36 +482,6 @@ static void MX_GPIO_Init(void)
LL_GPIO_Init(RMII_TXD0_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_14;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_4;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_5;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LD2_Pin;
GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
......@@ -1015,46 +489,6 @@ static void MX_GPIO_Init(void)
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_8;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_9;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_0;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_1;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/**/
LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTC, LL_SYSCFG_EXTI_LINE13);
/**/
EXTI_InitStruct.Line_0_31 = LL_EXTI_LINE_13;
EXTI_InitStruct.LineCommand = ENABLE;
EXTI_InitStruct.Mode = LL_EXTI_MODE_IT;
EXTI_InitStruct.Trigger = LL_EXTI_TRIGGER_RISING;
LL_EXTI_Init(&EXTI_InitStruct);
/**/
LL_GPIO_SetPinPull(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_PULL_NO);
/**/
LL_GPIO_SetPinMode(USER_Btn_GPIO_Port, USER_Btn_Pin, LL_GPIO_MODE_INPUT);
}
/* USER CODE BEGIN 4 */
......@@ -1091,4 +525,3 @@ void assert_failed(uint8_t *file, uint32_t line)
#endif /* USE_FULL_ASSERT */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/* USER CODE BEGIN Header */
/**
******************************************************************************
* File Name : stm32f7xx_hal_msp.c
* Description : This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */
/* USER CODE END Define */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */
/* USER CODE END Macro */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */
/* USER CODE END ExternalFunctions */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
{
/* USER CODE BEGIN MspInit 0 */
/* USER CODE END MspInit 0 */
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_RCC_SYSCFG_CLK_ENABLE();
/* System interrupt init*/
/* USER CODE BEGIN MspInit 1 */
/* USER CODE END MspInit 1 */
}
/**
* @brief PCD MSP Initialization
* This function configures the hardware resources used in this example
* @param hpcd: PCD handle pointer
* @retval None
*/
void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hpcd->Instance==USB_OTG_FS)
{
/* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
/* USER CODE END USB_OTG_FS_MspInit 0 */
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USB_OTG_FS GPIO Configuration
PA8 ------> USB_OTG_FS_SOF
PA9 ------> USB_OTG_FS_VBUS
PA10 ------> USB_OTG_FS_ID
PA11 ------> USB_OTG_FS_DM
PA12 ------> USB_OTG_FS_DP
*/
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* Peripheral clock enable */
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
/* USER CODE END USB_OTG_FS_MspInit 1 */
}
}
/**
* @brief PCD MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hpcd: PCD handle pointer
* @retval None
*/
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
{
if(hpcd->Instance==USB_OTG_FS)
{
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
/* USER CODE END USB_OTG_FS_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
/**USB_OTG_FS GPIO Configuration
PA8 ------> USB_OTG_FS_SOF
PA9 ------> USB_OTG_FS_VBUS
PA10 ------> USB_OTG_FS_ID
PA11 ------> USB_OTG_FS_DM
PA12 ------> USB_OTG_FS_DP
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|GPIO_PIN_12);
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
/* USER CODE END USB_OTG_FS_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
......@@ -184,7 +184,7 @@ void SysTick_Handler(void)
/* USER CODE BEGIN SysTick_IRQn 0 */
/* USER CODE END SysTick_IRQn 0 */
HAL_IncTick();
/* USER CODE BEGIN SysTick_IRQn 1 */
/* USER CODE END SysTick_IRQn 1 */
......
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <stdarg.h>
#include "crypto_aead.h"
#include "api.h"
#include "uartp.h"
#include "main.h"
#define MAX_BYTES 100
//#define DEBUG
#define CRYPTO_BUSY_GPIO_Port LD1_GPIO_Port
#define CRYPTO_BUSY_Pin LD1_Pin
uint8_t npub[CRYPTO_NPUBBYTES];
uint8_t nsec[CRYPTO_NSECBYTES];
uint8_t k[CRYPTO_KEYBYTES];
uint8_t ad[MAX_BYTES];
unsigned long long int adlen;
uint8_t m[MAX_BYTES];
unsigned long long int mlen;
uint8_t c[MAX_BYTES];
unsigned long long int clen;
int res;
void setup();
void loop();
void uart_wbyte(uint8_t x) {
while (!LL_USART_IsActiveFlag_TXE(USART2));
LL_USART_TransmitData8(USART2, x);
}
uint8_t uart_rbyte() {
while (!LL_USART_IsActiveFlag_RXNE(USART2));
uint8_t r = (uint8_t) LL_USART_ReceiveData8(USART2);
LL_USART_TransmitData8(USART2, r);
return r;
}
static inline void noInterrupts() {
// TODO: if necessary, provide a way to disable interrupts
}
static inline void interrupts() {
// TODO: if necessary, provide a way to enable interrupts
}
int dbg_printf(const char *format, ...) {
int r = 0;
#ifdef DEBUG
#define DEBUG_BUF_LEN 80
char printbuf[DEBUG_BUF_LEN+2];
va_list vargs;
va_start(vargs, format);
r = vsnprintf(printbuf+1, DEBUG_BUF_LEN, format, vargs);
va_end(vargs);
if (r < 0) {
memcpy(printbuf+1, "DEBUG ERROR\r\n", 13);
r = 13;
}
r = r > DEBUG_BUF_LEN ? DEBUG_BUF_LEN : r;
printbuf[0] = 0xde; // Debug messages should start with "\xde"
uartp_send(printbuf, r+1);
#endif
return r;
}
void my_assert(bool b) {
if (b)
return;
dbg_printf("Assertion failed\r\n");
Error_Handler();
for(;;);
}
void test_setup() {
LL_GPIO_SetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
LL_mDelay(100);
for (int i = 0; i < 13; i++) {
uart_wbyte("Hello, World!"[i]);
}
LL_USART_ReceiveData8(USART2);
}
void test_loop() {
uart_rbyte();
return;
static uint8_t buf[256];
uint16_t len = uartp_recv(buf, 255);
uint8_t action = buf[0];
if (len == 0 || len > 255)
return;
uint16_t l = len - 1;
uint16_t rl = 0;
uint8_t *var = buf+1;
switch (action) {
case 'm': my_assert(l <= MAX_BYTES); memcpy(m, var, l); mlen = l; break;
case 'c': my_assert(l <= MAX_BYTES); memcpy(c, var, l); clen = l; break;
case 'a': my_assert(l <= MAX_BYTES); memcpy(ad, var, l); adlen = l; break;
case 'k': my_assert(l == CRYPTO_KEYBYTES); memcpy(k, var, l); break;
case 'p': my_assert(l == CRYPTO_NPUBBYTES); memcpy(npub, var, l); break;
case 's': my_assert(l == CRYPTO_NSECBYTES); memcpy(nsec, var, l); break;
case 'e':
noInterrupts();
asm("nop");
LL_GPIO_ResetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
res = crypto_aead_encrypt(c, &clen, m, mlen, ad, adlen, nsec, npub, k);
LL_GPIO_SetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
asm("nop");
interrupts();
break;
case 'd':
noInterrupts();
asm("nop");
LL_GPIO_ResetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
res = crypto_aead_decrypt(m, &mlen, nsec, c, clen, ad, adlen, npub, k);
LL_GPIO_SetOutputPin(CRYPTO_BUSY_GPIO_Port, CRYPTO_BUSY_Pin);
asm("nop");
interrupts();
break;
case'M': var = m; rl = mlen; break;
case'C': var = c; rl = clen; break;
case'A': var = ad; rl = adlen; break;
case'K': var = k; rl = CRYPTO_KEYBYTES; break;
case'P': var = npub; rl = CRYPTO_NPUBBYTES; break;
case'S': var = nsec; rl = CRYPTO_NSECBYTES; break;
case'R': var = (uint8_t *) &res; rl = sizeof(res); break;
default:
dbg_printf("Unknown command\r\n");
my_assert(false);
}
buf[0] = action;
memcpy(buf+1, var, rl);
uartp_send(buf, rl+1);
}
#include <stdint.h>
#include "uartp.h"
extern void uart_wbyte(uint8_t x);
extern uint8_t uart_rbyte();
// Simple serial protocol with packets and checksum
const uint8_t AMUX_TAG = 0xf9;
const uint8_t AMUX_END = 0xf3;
const uint8_t AMUX_EXT = 0x80;
void uartp_send(const void *src, uint16_t len) {
uint8_t len_ind_0, len_ind_1, fcs, info;
const uint8_t *buf = (const uint8_t *) src;
uart_wbyte(AMUX_TAG);
len_ind_0 = (uint8_t) (0xff & len);
len_ind_1 = (uint8_t) (0xff & (len >> 7));
if (len < 128) {
uart_wbyte(len_ind_0);
} else {
uart_wbyte(len_ind_0 | AMUX_EXT);
uart_wbyte(len_ind_1);
}
fcs = 0;
for (uint16_t i = 0; i < len; i++) {
info = buf[i];
fcs += info;
uart_wbyte(buf[i]);
}
fcs = 255 - fcs;
uart_wbyte(fcs);
uart_wbyte(AMUX_END);
}
uint16_t uartp_recv(void *dst, uint16_t buf_len) {
uint8_t *buf = (uint8_t *) dst;
uint8_t tag_old, tag, info, cs;
uint16_t len;
tag = AMUX_END;
while (1) {
do {
tag_old = tag;
tag = uart_rbyte();
} while(tag != AMUX_TAG || tag_old != AMUX_END);
len = (uint16_t) uart_rbyte();
if (len & AMUX_EXT) {
len &= (~AMUX_EXT);
len |= (uint16_t) (uart_rbyte() << 7);
}
if (len > buf_len) {
return len;
}
uint16_t i = 0;
cs = 0;
for (i = 0; i < len; i++) {
info = uart_rbyte();
buf[i] = info;
cs += info;
}
cs += uart_rbyte();
tag = uart_rbyte();
if (0xff == cs) {
if (AMUX_END == tag) {
return len;
}
}
}
}
#!/bin/bash
mv $HDR_FILES Inc/
mv "middleware.py" "test"
mv -n *.inc *.h Inc/
sed -i src/encrypt.c -e "s/\(\s\)init(/\1_init(/g"
exit 0
int crypto_aead_encrypt(
unsigned char *c,unsigned long long *clen,
const unsigned char *m,unsigned long long mlen,
const unsigned char *ad,unsigned long long adlen,
const unsigned char *nsec,
const unsigned char *npub,
const unsigned char *k
);
int crypto_aead_decrypt(
unsigned char *m,unsigned long long *outputmlen,
unsigned char *nsec,
const unsigned char *c,unsigned long long clen,
const unsigned char *ad,unsigned long long adlen,
const unsigned char *npub,
const unsigned char *k
);
......@@ -6,31 +6,31 @@ Mcu.IP0=CORTEX_M7
Mcu.IP1=NVIC
Mcu.IP2=RCC
Mcu.IP3=SYS
Mcu.IP4=UART4
Mcu.IP5=USB_OTG_FS
Mcu.IP4=USART2
Mcu.IP5=USART3
Mcu.IPNb=6
Mcu.Name=STM32F746ZGTx
Mcu.Package=LQFP144
Mcu.Pin0=PC13
Mcu.Pin1=PC14/OSC32_IN
Mcu.Pin10=PC5
Mcu.Pin11=PB0
Mcu.Pin12=PB13
Mcu.Pin13=PB14
Mcu.Pin14=PD8
Mcu.Pin15=PD9
Mcu.Pin16=PG6
Mcu.Pin17=PG7
Mcu.Pin18=PA8
Mcu.Pin19=PA9
Mcu.Pin10=PC4
Mcu.Pin11=PC5
Mcu.Pin12=PB0
Mcu.Pin13=PB13
Mcu.Pin14=PB14
Mcu.Pin15=PD8
Mcu.Pin16=PD9
Mcu.Pin17=PG6
Mcu.Pin18=PG7
Mcu.Pin19=PA8
Mcu.Pin2=PC15/OSC32_OUT
Mcu.Pin20=PA10
Mcu.Pin21=PA11
Mcu.Pin22=PA12
Mcu.Pin23=PA13
Mcu.Pin24=PA14
Mcu.Pin25=PC10
Mcu.Pin26=PC11
Mcu.Pin20=PA9
Mcu.Pin21=PA10
Mcu.Pin22=PA11
Mcu.Pin23=PA12
Mcu.Pin24=PA13
Mcu.Pin25=PA14
Mcu.Pin26=PD5
Mcu.Pin27=PG11
Mcu.Pin28=PG13
Mcu.Pin29=PB3
......@@ -41,14 +41,14 @@ Mcu.Pin4=PH1/OSC_OUT
Mcu.Pin5=PC1
Mcu.Pin6=PA1
Mcu.Pin7=PA2
Mcu.Pin8=PA7
Mcu.Pin9=PC4
Mcu.Pin8=PA3
Mcu.Pin9=PA7
Mcu.PinsNb=32
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F746ZGTx
MxCube.Version=5.2.1
MxDb.Version=DB.5.0.21
MxCube.Version=5.3.0
MxDb.Version=DB.5.0.30
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
......@@ -70,12 +70,10 @@ PA10.Signal=USB_OTG_FS_ID
PA11.GPIOParameters=GPIO_Label
PA11.GPIO_Label=USB_DM
PA11.Locked=true
PA11.Mode=Device_Only
PA11.Signal=USB_OTG_FS_DM
PA12.GPIOParameters=GPIO_Label
PA12.GPIO_Label=USB_DP
PA12.Locked=true
PA12.Mode=Device_Only
PA12.Signal=USB_OTG_FS_DP
PA13.GPIOParameters=GPIO_Label
PA13.GPIO_Label=TMS
......@@ -91,6 +89,8 @@ PA2.GPIOParameters=GPIO_Label
PA2.GPIO_Label=RMII_MDIO [LAN8742A-CZ-TR_MDIO]
PA2.Locked=true
PA2.Signal=ETH_MDIO
PA3.Mode=Asynchronous
PA3.Signal=USART2_RX
PA7.GPIOParameters=GPIO_Label
PA7.GPIO_Label=RMII_CRS_DV [LAN8742A-CZ-TR_CRS_DV]
PA7.Locked=true
......@@ -98,12 +98,10 @@ PA7.Signal=ETH_CRS_DV
PA8.GPIOParameters=GPIO_Label
PA8.GPIO_Label=USB_SOF [TP1]
PA8.Locked=true
PA8.Mode=Activate_SOF_FS
PA8.Signal=USB_OTG_FS_SOF
PA9.GPIOParameters=GPIO_Label
PA9.GPIO_Label=USB_VBUS
PA9.Locked=true
PA9.Mode=Activate_VBUS
PA9.Signal=USB_OTG_FS_VBUS
PB0.GPIOParameters=GPIO_Label
PB0.GPIO_Label=LD1 [Green]
......@@ -129,11 +127,6 @@ PC1.GPIOParameters=GPIO_Label
PC1.GPIO_Label=RMII_MDC [LAN8742A-CZ-TR_MDC]
PC1.Locked=true
PC1.Signal=ETH_MDC
PC10.Locked=true
PC10.Mode=Asynchronous
PC10.Signal=UART4_TX
PC11.Mode=Asynchronous
PC11.Signal=UART4_RX
PC13.GPIOParameters=GPIO_Label
PC13.GPIO_Label=USER_Btn [B1]
PC13.Locked=true
......@@ -160,13 +153,17 @@ PCC.Seq0=0
PCC.Series=STM32F7
PCC.Temperature=25
PCC.Vdd=3.6
PD5.Mode=Asynchronous
PD5.Signal=USART2_TX
PD8.GPIOParameters=GPIO_Label
PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
PD8.Locked=true
PD8.Mode=Asynchronous
PD8.Signal=USART3_TX
PD9.GPIOParameters=GPIO_Label
PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
PD9.Locked=true
PD9.Mode=Asynchronous
PD9.Signal=USART3_RX
PG11.GPIOParameters=GPIO_Label
PG11.GPIO_Label=RMII_TX_EN [LAN8742A-CZ-TR_TXEN]
......@@ -203,12 +200,12 @@ ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32F746ZGTx
ProjectManager.FirmwarePackage=STM32Cube FW_F7 V1.15.0
ProjectManager.FreePins=true
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=1
ProjectManager.LibraryCopy=0
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
......@@ -219,7 +216,7 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=Makefile
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,4-MX_UART4_Init-UART4-false-LL-true
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_UART4_Init-UART4-false-LL-true,3-MX_USART2_UART_Init-USART2-false-LL-true,4-MX_USART3_UART_Init-USART3-false-LL-true
RCC.48MHZClocksFreq_Value=24000000
RCC.ADC12outputFreq_Value=72000000
RCC.ADC34outputFreq_Value=72000000
......@@ -243,7 +240,7 @@ RCC.I2C3Freq_Value=36000000
RCC.I2C4Freq_Value=36000000
RCC.I2SClocksFreq_Value=48000000
RCC.I2SFreq_Value=192000000
RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SClocksFreq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,PRESCALERUSB,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
RCC.LCDTFToutputFreq_Value=96000000
RCC.LPTIM1Freq_Value=36000000
RCC.LSI_VALUE=32000
......@@ -266,6 +263,7 @@ RCC.PLLSAIPCLKFreq_Value=192000000
RCC.PLLSAIQCLKFreq_Value=192000000
RCC.PLLSAIRCLKFreq_Value=192000000
RCC.PLLSAIoutputFreq_Value=192000000
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
RCC.RNGFreq_Value=48000000
RCC.RTCFreq_Value=32000
......@@ -303,8 +301,10 @@ RCC.VcooutputI2S=48000000
RCC.WatchDogFreq_Value=32000
SH.GPXTI13.0=GPIO_EXTI13
SH.GPXTI13.ConfNb=1
USB_OTG_FS.IPParameters=VirtualMode
USB_OTG_FS.VirtualMode=Device_Only
USART2.IPParameters=VirtualMode-Asynchronous
USART2.VirtualMode-Asynchronous=VM_ASYNC
USART3.IPParameters=VirtualMode-Asynchronous
USART3.VirtualMode-Asynchronous=VM_ASYNC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=NUCLEO-F746ZG
......
#!/usr/bin/python3 -u
import os
import sys
import time
import struct
import serial
import subprocess
DBG=''
ser = serial.Serial('/dev/ttyUSB0', 115200)
def flash():
pipe = subprocess.PIPE
p = subprocess.Popen(['JLinkExe', 'flash.jlink'], stdout=sys.stderr, stdin=pipe)
#p = subprocess.Popen(['stm32flash', 'build/f7.bin', '0x8000000'], stdout=sys.stderr, stdin=pipe)
stdout, stderr = p.communicate("")
def read(channel, l):
if channel == 'ser':
data = ser.read(l)
elif channel == 'std':
data = sys.stdin.buffer.read(l)
else:
raise Exception("read() complains: no sai channelino")
if len(data) != l:
raise Exception("could not read %d bytes of data (got %d)" % (l, len(data)))
return data
def write(channel, data):
if channel == 'ser':
l = ser.write(data)
if DBG:
print("Data sent to serial: " + str(data) + "\n", file=sys.stderr)
elif channel == 'std':
l = sys.stdout.buffer.write(data)
else:
raise Exception("write() complains: no sai channelino")
if len(data) != l:
raise Exception("could not write %d bytes of data (put %d)" % (len(data), l))
def obtain(channel):
l = read(channel, 4)
(l, ) = struct.unpack("<I", l)
if DBG:
print("Trying to read %d bytes from %s\n" % (l, channel), file=sys.stderr)
return read(channel, l)
def submit(channel, action, data):
if channel == "std":
h = struct.pack("<I", len(data))
else:
h = struct.pack("<BI", ord(action), len(data))
write(channel, h)
write(channel, data)
time.sleep(0.1)
def main(argv):
if DBG:
print(argv[0], file=sys.stderr)
script_dir = os.path.split(argv[0])[0]
if len(script_dir ) > 0:
os.chdir(script_dir)
flash()
print("Hello, World!")
while(1):
action = read('std', 1)
if DBG:
print("Read following action from stdin: %s\n" % action, file=sys.stderr)
if action == b'c' or action == b'm' or action == b'a' or action == b'k' or action == b's' or action == b'p':
data = obtain('std')
submit('ser', action, data)
elif action == b'e' or action == b'd':
write('ser', action)
elif action == b'C' or action == b'M' or action == b'A' or action == b'K' or action == b'S' or action == b'P':
write('ser', action)
data = obtain('ser')
if DBG:
print("Obtained following data from serial: %s\n" % data, file=sys.stderr)
submit('std', action, data)
if DBG:
print("Submitted following data to stdout: %s\n" % data, file=sys.stderr)
else:
raise Exception("no capiche aczione %s" % (action))
if __name__ == "__main__":
sys.exit(main(sys.argv))
#!/usr/bin/env python3
import os
import sys
import time
import struct
import serial
import subprocess
def eprint(*args, **kargs):
print(*args, file=sys.stderr, **kargs)
def flash():
pipe = subprocess.PIPE
cmd = ['JLinkExe', 'flash.jlink']
p = subprocess.Popen(cmd,
stdout=sys.stderr, stdin=pipe)
stdout, stderr = p.communicate("")
def get_serial():
import serial.tools.list_ports
ports = serial.tools.list_ports.comports()
devices = [ p.device for p in ports ]
devices.sort()
return devices[-1]
class UARTP:
def __init__(self, ser):
UARTP.SYN = 0xf9
UARTP.FIN = 0xf3
self.ser = ser
def uart_read(self):
r = self.ser.read(1)
if len(r) != 1:
raise Exception("Serial read error")
return r[0]
def uart_write(self, c):
b = struct.pack("B", c)
r = self.ser.write(b)
if r != len(b):
raise Exception("Serial write error")
return r
def send(self, buf):
self.uart_write(UARTP.SYN)
len_ind_0 = 0xff & len(buf)
len_ind_1 = 0xff & (len(buf) >> 7)
if len(buf) < 128:
self.uart_write(len_ind_0)
else:
self.uart_write(len_ind_0 | 0x80)
self.uart_write(len_ind_1)
fcs = 0
for i in range(len(buf)):
info = buf[i]
fcs = (fcs + info) & 0xff
self.uart_write(buf[i])
fcs = (0xff - fcs) & 0xff
self.uart_write(fcs)
self.uart_write(UARTP.FIN)
eprint("sent frame '%s'" % buf.hex())
def recv(self):
tag_old = UARTP.FIN
while 1:
tag = tag_old
while 1:
if tag_old == UARTP.FIN:
if tag == UARTP.SYN:
break
tag_old = tag
tag = self.uart_read()
tag_old = tag
l = self.uart_read()
if l & 0x80:
l &= 0x7f
l |= self.uart_read() << 7
fcs = 0
buf = []
for i in range(l):
info = self.uart_read()
buf.append(info)
fcs = (fcs + info) & 0xff
fcs = (fcs + self.uart_read()) & 0xff
tag = self.uart_read()
if fcs == 0xff:
if tag == UARTP.FIN:
buf = bytes(buf)
eprint("rcvd frame '%s'" % buf.hex())
if len(buf) >= 1 and buf[0] == 0xde:
sys.stderr.buffer.write(buf[1:])
sys.stderr.flush()
else:
return buf
def main(argv):
eprint(argv[0])
script_dir = os.path.split(argv[0])[0]
if len(script_dir) > 0:
os.chdir(script_dir)
dev = get_serial()
ser = serial.Serial(dev, baudrate=115200, timeout=5)
uartp = UARTP(ser)
flash()
eprint("Flashed")
time.sleep(0.1)
ser.setDTR(False) # IO0=HIGH
ser.setRTS(True) # EN=LOW, chip in reset
time.sleep(0.1)
ser.setDTR(False) # IO0=HIGH
ser.setRTS(False) # EN=HIGH, chip out of reset
time.sleep(1)
def stdin_read(n):
b = sys.stdin.buffer.read(n)
if len(b) != n:
sys.exit(1)
return b
def stdin_readvar():
l = stdin_read(4)
(l, ) = struct.unpack("<I", l)
v = stdin_read(l)
return v
exp_hello = b"Hello, World!"
hello = ser.read(ser.in_waiting)
if hello[-13:] != exp_hello:
eprint("Improper board initialization message: %s" % hello)
return 1
eprint("Board initialized properly")
sys.stdout.write("Hello, World!\n")
sys.stdout.flush()
while 1:
action = stdin_read(1)[0]
eprint("Command %c from stdin" % action)
if action in b"ackmps":
v = stdin_readvar()
uartp.send(struct.pack("B", action) + v)
ack = uartp.recv()
if len(ack) != 1 or ack[0] != action:
raise Exception("Unacknowledged variable transfer")
eprint("Var %c successfully sent to board" % action)
elif action in b"ACKMPS":
c = struct.pack("B", action)
uartp.send(c)
v = uartp.recv()
if len(v) < 1 or v[0] != action:
raise Exception("Could not obtain variable from board")
v = v[1:]
eprint("Var %c received from board: %s" % (action, v.hex()))
l = struct.pack("<I", len(v))
sys.stdout.buffer.write(l + v)
sys.stdout.flush()
elif action in b"ed":
c = struct.pack("B", action)
uartp.send(c)
ack = uartp.recv()
if len(ack) != 1 or ack[0] != action:
raise Exception("Unacknowledged variable transfer")
eprint("Operation %c completed successfully" % action)
else:
raise Exception("Unknown action %c" % action)
return 0
if __name__ == "__main__":
sys.exit(main(sys.argv))
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or sign in to comment