stm32f7xx_ll_utils.c

/**
  ******************************************************************************
  * @file    stm32f7xx_ll_utils.c
  * @author  MCD Application Team
  * @brief   UTILS LL module driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_ll_utils.h"
#include "stm32f7xx_ll_rcc.h"
#include "stm32f7xx_ll_system.h"
#include "stm32f7xx_ll_pwr.h"
#ifdef  USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */

/** @addtogroup STM32F7xx_LL_Driver
  * @{
  */

/** @addtogroup UTILS_LL
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup UTILS_LL_Private_Constants
  * @{
  */
#define UTILS_MAX_FREQUENCY_SCALE1  216000000U /*!< Maximum frequency for system clock at power scale1, in Hz */
#define UTILS_MAX_FREQUENCY_SCALE2  180000000U       /*!< Maximum frequency for system clock at power scale2, in Hz */
#define UTILS_MAX_FREQUENCY_SCALE3  144000000U       /*!< Maximum frequency for system clock at power scale3, in Hz */

/* Defines used for PLL range */
#define UTILS_PLLVCO_INPUT_MIN         950000U       /*!< Frequency min for PLLVCO input, in Hz   */
#define UTILS_PLLVCO_INPUT_MAX        2100000U       /*!< Frequency max for PLLVCO input, in Hz   */
#define UTILS_PLLVCO_OUTPUT_MIN     100000000U       /*!< Frequency min for PLLVCO output, in Hz  */
#define UTILS_PLLVCO_OUTPUT_MAX     432000000U       /*!< Frequency max for PLLVCO output, in Hz  */

/* Defines used for HSE range */
#define UTILS_HSE_FREQUENCY_MIN      4000000U        /*!< Frequency min for HSE frequency, in Hz   */
#define UTILS_HSE_FREQUENCY_MAX     26000000U        /*!< Frequency max for HSE frequency, in Hz   */

/* Defines used for FLASH latency according to HCLK Frequency */
#define UTILS_SCALE1_LATENCY1_FREQ   30000000U      /*!< HCLK frequency to set FLASH latency 1 in power scale 1  */
#define UTILS_SCALE1_LATENCY2_FREQ   60000000U      /*!< HCLK frequency to set FLASH latency 2 in power scale 1  */
#define UTILS_SCALE1_LATENCY3_FREQ   90000000U      /*!< HCLK frequency to set FLASH latency 3 in power scale 1  */
#define UTILS_SCALE1_LATENCY4_FREQ  120000000U      /*!< HCLK frequency to set FLASH latency 4 in power scale 1  */
#define UTILS_SCALE1_LATENCY5_FREQ  150000000U      /*!< HCLK frequency to set FLASH latency 5 in power scale 1  */
#define UTILS_SCALE1_LATENCY6_FREQ  180000000U      /*!< HCLK frequency to set FLASH latency 6 in power scale 1  with over-drive mode */
#define UTILS_SCALE1_LATENCY7_FREQ  210000000U      /*!< HCLK frequency to set FLASH latency 7 in power scale 1  with over-drive mode */
#define UTILS_SCALE2_LATENCY1_FREQ   30000000U      /*!< HCLK frequency to set FLASH latency 1 in power scale 2  */
#define UTILS_SCALE2_LATENCY2_FREQ   60000000U      /*!< HCLK frequency to set FLASH latency 2 in power scale 2  */
#define UTILS_SCALE2_LATENCY3_FREQ   90000000U      /*!< HCLK frequency to set FLASH latency 3 in power scale 2  */
#define UTILS_SCALE2_LATENCY4_FREQ  120000000U      /*!< HCLK frequency to set FLASH latency 4 in power scale 2  */
#define UTILS_SCALE2_LATENCY5_FREQ  150000000U      /*!< HCLK frequency to set FLASH latency 5 in power scale 2  */
#define UTILS_SCALE3_LATENCY1_FREQ   30000000U      /*!< HCLK frequency to set FLASH latency 1 in power scale 3  */
#define UTILS_SCALE3_LATENCY2_FREQ   60000000U      /*!< HCLK frequency to set FLASH latency 2 in power scale 3  */
#define UTILS_SCALE3_LATENCY3_FREQ   90000000U      /*!< HCLK frequency to set FLASH latency 3 in power scale 3  */
#define UTILS_SCALE3_LATENCY4_FREQ  120000000U      /*!< HCLK frequency to set FLASH latency 4 in power scale 3  */
/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @addtogroup UTILS_LL_Private_Macros
  * @{
  */
#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1)   \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2)   \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4)   \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8)   \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16)  \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64)  \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \
                                        || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512))

#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \
                                      || ((__VALUE__) == LL_RCC_APB1_DIV_2) \
                                      || ((__VALUE__) == LL_RCC_APB1_DIV_4) \
                                      || ((__VALUE__) == LL_RCC_APB1_DIV_8) \
                                      || ((__VALUE__) == LL_RCC_APB1_DIV_16))

#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \
                                      || ((__VALUE__) == LL_RCC_APB2_DIV_2) \
                                      || ((__VALUE__) == LL_RCC_APB2_DIV_4) \
                                      || ((__VALUE__) == LL_RCC_APB2_DIV_8) \
                                      || ((__VALUE__) == LL_RCC_APB2_DIV_16))

#define IS_LL_UTILS_PLLM_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLM_DIV_2)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_3)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_4)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_5)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_6)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_7)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_8)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_9)  \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_10) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_11) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_12) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_13) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_14) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_15) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_16) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_17) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_18) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_19) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_20) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_21) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_22) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_23) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_24) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_25) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_26) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_27) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_28) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_29) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_30) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_31) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_32) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_33) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_34) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_35) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_36) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_37) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_38) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_39) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_40) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_41) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_42) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_43) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_44) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_45) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_46) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_47) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_48) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_49) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_50) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_51) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_52) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_53) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_54) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_55) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_56) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_57) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_58) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_59) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_60) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_61) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_62) \
                                        || ((__VALUE__) == LL_RCC_PLLM_DIV_63))

#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((50 <= (__VALUE__)) && ((__VALUE__) <= 432))

#define IS_LL_UTILS_PLLP_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLP_DIV_2) \
                                        || ((__VALUE__) == LL_RCC_PLLP_DIV_4) \
                                        || ((__VALUE__) == LL_RCC_PLLP_DIV_6) \
                                        || ((__VALUE__) == LL_RCC_PLLP_DIV_8))

#define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__)  ((UTILS_PLLVCO_INPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX))

#define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX))

#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \
                                              (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2) : \
                                              ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE3))

#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \
                                        || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF))

#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX))
/**
  * @}
  */
/* Private function prototypes -----------------------------------------------*/
/** @defgroup UTILS_LL_Private_Functions UTILS Private functions
  * @{
  */
static uint32_t    UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency,
                                               LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct);
static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency);
static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
static ErrorStatus UTILS_PLL_IsBusy(void);
/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @addtogroup UTILS_LL_Exported_Functions
  * @{
  */

/** @addtogroup UTILS_LL_EF_DELAY
  * @{
  */

/**
  * @brief  This function configures the Cortex-M SysTick source to have 1ms time base.
  * @note   When a RTOS is used, it is recommended to avoid changing the Systick
  *         configuration by calling this function, for a delay use rather osDelay RTOS service.
  * @param  HCLKFrequency HCLK frequency in Hz
  * @note   HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq
  * @retval None
  */
void LL_Init1msTick(uint32_t HCLKFrequency)
{
  /* Use frequency provided in argument */
  LL_InitTick(HCLKFrequency, 1000U);
}

/**
  * @brief  This function provides accurate delay (in milliseconds) based
  *         on SysTick counter flag
  * @note   When a RTOS is used, it is recommended to avoid using blocking delay
  *         and use rather osDelay service.
  * @note   To respect 1ms timebase, user should call @ref LL_Init1msTick function which
  *         will configure Systick to 1ms
  * @param  Delay specifies the delay time length, in milliseconds.
  * @retval None
  */
void LL_mDelay(uint32_t Delay)
{
  __IO uint32_t  tmp = SysTick->CTRL;  /* Clear the COUNTFLAG first */
  /* Add this code to indicate that local variable is not used */
  ((void)tmp);

  /* Add a period to guaranty minimum wait */
  if(Delay < LL_MAX_DELAY)
  {
    Delay++;
  }

  while (Delay)
  {
    if((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U)
    {
      Delay--;
    }
  }
}

/**
  * @}
  */

/** @addtogroup UTILS_EF_SYSTEM
  *  @brief    System Configuration functions
  *
  @verbatim
 ===============================================================================
           ##### System Configuration functions #####
 ===============================================================================
    [..]
         System, AHB and APB buses clocks configuration

         (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 216000000 Hz.
  @endverbatim
  @internal
             Depending on the device voltage range, the maximum frequency should be
             adapted accordingly:
             (++) +------------------------------------------------------------------------------------------------+
             (++) |  Wait states   |                           HCLK clock frequency (MHz)                          |
             (++) |                |-------------------------------------------------------------------------------|
             (++) |  (Latency)     |   voltage range   |   voltage range   |   voltage range   |   voltage range   |
             (++) |                |    2.7V - 3.6V    |    2.4V - 2.7V    |    2.1V - 2.7V    |    1.8V - 2.1V    |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |0WS(1CPU cycle) |   0 < HCLK <= 30  |   0 < HCLK <= 24  |   0 < HCLK <= 22  |   0 < HCLK <= 20  |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |1WS(2CPU cycle) |  30 < HCLK <= 60  |  24 < HCLK <= 48  |  22 < HCLK <= 44  |  20 < HCLK <= 44  |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |2WS(3CPU cycle) |  60 < HCLK <= 90  |  48 < HCLK <= 72  |  44 < HCLK <= 66  |  40 < HCLK <= 60  |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |3WS(4CPU cycle) |  90 < HCLK <= 120 |  72 < HCLK <= 96  |  66 < HCLK <= 88  |  60 < HCLK <= 80  |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |4WS(5CPU cycle) | 120 < HCLK <= 150 |  96 < HCLK <= 120 |  88 < HCLK <= 110 |  80 < HCLK <= 100 |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |5WS(6CPU cycle) | 150 < HCLK <= 180 | 120 < HCLK <= 144 | 110 < HCLK <= 132 | 100 < HCLK <= 120 |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |6WS(7CPU cycle) | 180 < HCLK <= 210 | 144 < HCLK <= 168 | 132 < HCLK <= 154 | 120 < HCLK <= 140 |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |7WS(8CPU cycle) | 210 < HCLK <= 216 | 168 < HCLK <= 192 | 154 < HCLK <= 176 | 140 < HCLK <= 160 |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |8WS(9CPU cycle) |        --         | 192 < HCLK <= 216 | 176 < HCLK <= 198 | 160 < HCLK <= 180 |
             (++) |----------------|-------------------|-------------------|-------------------|-------------------|
             (++) |9WS(10CPU cycle)|        --         |         --        | 198 < HCLK <= 216 |         --        |
             (++) +------------------------------------------------------------------------------------------------+

  @endinternal
  * @{
  */

/**
  * @brief  This function sets directly SystemCoreClock CMSIS variable.
  * @note   Variable can be calculated also through SystemCoreClockUpdate function.
  * @param  HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
  * @retval None
  */
void LL_SetSystemCoreClock(uint32_t HCLKFrequency)
{
  /* HCLK clock frequency */
  SystemCoreClock = HCLKFrequency;
}

/**
  * @brief  This function configures system clock at maximum frequency with HSI as clock source of the PLL
  * @note   The application need to ensure that PLL is disabled.
  * @note   Function is based on the following formula:
  *         - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLP)
  *         - PLLM: ensure that the VCO input frequency ranges from 0.95 to 2.1 MHz (PLLVCO_input = HSI frequency / PLLM)
  *         - PLLN: ensure that the VCO output frequency is between 100 and 432 MHz (PLLVCO_output = PLLVCO_input * PLLN)
  *         - PLLP: ensure that max frequency at 216000000 Hz is reach (PLLVCO_output / PLLP)
  * @param  UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
  *                             the configuration information for the PLL.
  * @param  UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
  *                             the configuration information for the BUS prescalers.
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: Max frequency configuration done
  *          - ERROR: Max frequency configuration not done
  */
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
                                         LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
  ErrorStatus status = SUCCESS;
  uint32_t pllfreq = 0U;

  /* Check if one of the PLL is enabled */
  if(UTILS_PLL_IsBusy() == SUCCESS)
  {
    /* Calculate the new PLL output frequency */
    pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct);

    /* Enable HSI if not enabled */
    if(LL_RCC_HSI_IsReady() != 1U)
    {
      LL_RCC_HSI_Enable();
      while (LL_RCC_HSI_IsReady() != 1U)
      {
        /* Wait for HSI ready */
      }
    }

    /* Configure PLL */
    LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN,
                                UTILS_PLLInitStruct->PLLP);

    /* Enable PLL and switch system clock to PLL */
    status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
  }
  else
  {
    /* Current PLL configuration cannot be modified */
    status = ERROR;
  }

  return status;
}

/**
  * @brief  This function configures system clock with HSE as clock source of the PLL
  * @note   The application need to ensure that PLL is disabled.
  * @note   Function is based on the following formula:
  *         - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLP)
  *         - PLLM: ensure that the VCO input frequency ranges from 0.95 to 2.10 MHz (PLLVCO_input = HSE frequency / PLLM)
  *         - PLLN: ensure that the VCO output frequency is between 100 and 432 MHz (PLLVCO_output = PLLVCO_input * PLLN)
  *         - PLLP: ensure that max frequency at 216000000 Hz is reached (PLLVCO_output / PLLP)
  * @param  HSEFrequency Value between Min_Data = 4000000 and Max_Data = 26000000
  * @param  HSEBypass This parameter can be one of the following values:
  *         @arg @ref LL_UTILS_HSEBYPASS_ON
  *         @arg @ref LL_UTILS_HSEBYPASS_OFF
  * @param  UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
  *                             the configuration information for the PLL.
  * @param  UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
  *                             the configuration information for the BUS prescalers.
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: Max frequency configuration done
  *          - ERROR: Max frequency configuration not done
  */
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
                                         LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
  ErrorStatus status = SUCCESS;
  uint32_t pllfreq = 0U;

  /* Check the parameters */
  assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency));
  assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass));

  /* Check if one of the PLL is enabled */
  if(UTILS_PLL_IsBusy() == SUCCESS)
  {
    /* Calculate the new PLL output frequency */
    pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct);

    /* Enable HSE if not enabled */
    if(LL_RCC_HSE_IsReady() != 1U)
    {
      /* Check if need to enable HSE bypass feature or not */
      if(HSEBypass == LL_UTILS_HSEBYPASS_ON)
      {
        LL_RCC_HSE_EnableBypass();
      }
      else
      {
        LL_RCC_HSE_DisableBypass();
      }

      /* Enable HSE */
      LL_RCC_HSE_Enable();
      while (LL_RCC_HSE_IsReady() != 1U)
      {
        /* Wait for HSE ready */
      }
    }

    /* Configure PLL */
    LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN,
                                UTILS_PLLInitStruct->PLLP);

    /* Enable PLL and switch system clock to PLL */
    status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
  }
  else
  {
    /* Current PLL configuration cannot be modified */
    status = ERROR;
  }

  return status;
}

/**
  * @}
  */

/**
  * @}
  */

/** @addtogroup UTILS_LL_Private_Functions
  * @{
  */
/**
  * @brief  Update number of Flash wait states in line with new frequency and current
            voltage range.
  * @note   This Function support ONLY devices with supply voltage (voltage range) between 2.7V and 3.6V
  * @param  HCLK_Frequency  HCLK frequency
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: Latency has been modified
  *          - ERROR: Latency cannot be modified
  */
static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency)
{
  ErrorStatus status = SUCCESS;

  uint32_t latency = LL_FLASH_LATENCY_0;  /* default value 0WS */

  /* Frequency cannot be equal to 0 */
  if(HCLK_Frequency == 0U)
  {
    status = ERROR;
  }
  else
  {
    if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1)
    {
      if(LL_PWR_IsEnabledOverDriveMode() != 0U)
        {
          if(HCLK_Frequency > UTILS_SCALE1_LATENCY7_FREQ)
          {
            /* 210 < HCLK <= 216 => 7WS (8 CPU cycles) */
            latency = LL_FLASH_LATENCY_7;
          }
          else /* (HCLK_Frequency > UTILS_SCALE1_LATENCY6_FREQ) */
          {
            /* 180 < HCLK <= 210 => 6WS (7 CPU cycles) */
            latency = LL_FLASH_LATENCY_6;
          }
        }
      if((HCLK_Frequency > UTILS_SCALE1_LATENCY5_FREQ) && (latency == LL_FLASH_LATENCY_0))
      {
        /* 150 < HCLK <= 180 => 5WS (6 CPU cycles) */
        latency = LL_FLASH_LATENCY_5;
      }
      else if((HCLK_Frequency > UTILS_SCALE1_LATENCY4_FREQ) && (latency == LL_FLASH_LATENCY_0))
      {
        /* 120 < HCLK <= 150 => 4WS (5 CPU cycles) */
        latency = LL_FLASH_LATENCY_4;
      }
      else if((HCLK_Frequency > UTILS_SCALE1_LATENCY3_FREQ) && (latency == LL_FLASH_LATENCY_0))
      {
        /* 90 < HCLK <= 120 => 3WS (4 CPU cycles) */
        latency = LL_FLASH_LATENCY_3;
      }
      else if((HCLK_Frequency > UTILS_SCALE1_LATENCY2_FREQ) && (latency == LL_FLASH_LATENCY_0))
      {
        /* 60 < HCLK <= 90 => 2WS (3 CPU cycles) */
        latency = LL_FLASH_LATENCY_2;
      }
      else
      {
        if((HCLK_Frequency > UTILS_SCALE1_LATENCY1_FREQ) && (latency == LL_FLASH_LATENCY_0))
        {
          /* 30 < HCLK <= 60 => 1WS (2 CPU cycles) */
          latency = LL_FLASH_LATENCY_1;
        }
        /* else HCLK_Frequency < 30MHz default LL_FLASH_LATENCY_0 0WS */
      }
    }
    else if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2)
    {
      if(HCLK_Frequency > UTILS_SCALE2_LATENCY5_FREQ)
      {
        /* 150 < HCLK <= 168 OR 150 < HCLK <= 180 (when OverDrive mode is enable) => 5WS (6 CPU cycles) */
        latency = LL_FLASH_LATENCY_5;
      }
      else if(HCLK_Frequency > UTILS_SCALE2_LATENCY4_FREQ)
      {
        /* 120 < HCLK <= 150 => 4WS (5 CPU cycles) */
        latency = LL_FLASH_LATENCY_4;
      }
      else if(HCLK_Frequency > UTILS_SCALE2_LATENCY3_FREQ)
      {
        /* 90 < HCLK <= 120 => 3WS (4 CPU cycles) */
        latency = LL_FLASH_LATENCY_3;
      }
      else if(HCLK_Frequency > UTILS_SCALE2_LATENCY2_FREQ)
      {
        /* 60 < HCLK <= 90 => 2WS (3 CPU cycles) */
        latency = LL_FLASH_LATENCY_2;
      }
      else
      {
        if(HCLK_Frequency > UTILS_SCALE2_LATENCY1_FREQ)
        {
          /* 30 < HCLK <= 60 => 1WS (2 CPU cycles) */
          latency = LL_FLASH_LATENCY_1;
        }
        /* else HCLK_Frequency < 24MHz default LL_FLASH_LATENCY_0 0WS */
      }
    }
    else /* Scale 3 */
    {
      if(HCLK_Frequency > UTILS_SCALE3_LATENCY4_FREQ)
      {
        /* 120 < HCLK <= 144 => 4WS (5 CPU cycles) */
        latency = LL_FLASH_LATENCY_4;
      }
      else if(HCLK_Frequency > UTILS_SCALE3_LATENCY3_FREQ)
      {
        /* 90 < HCLK <= 120 => 3WS (4 CPU cycles) */
        latency = LL_FLASH_LATENCY_3;
      }
      else if(HCLK_Frequency > UTILS_SCALE3_LATENCY2_FREQ)
      {
        /* 60 < HCLK <= 90 => 2WS (3 CPU cycles) */
        latency = LL_FLASH_LATENCY_2;
      }
      else
      {
        if(HCLK_Frequency > UTILS_SCALE3_LATENCY1_FREQ)
        {
          /* 30 < HCLK <= 60 => 1WS (2 CPU cycles) */
          latency = LL_FLASH_LATENCY_1;
        }
        /* else HCLK_Frequency < 22MHz default LL_FLASH_LATENCY_0 0WS */
      }
    }

    LL_FLASH_SetLatency(latency);

    /* Check that the new number of wait states is taken into account to access the Flash
       memory by reading the FLASH_ACR register */
    if(LL_FLASH_GetLatency() != latency)
    {
      status = ERROR;
    }
  }
  return status;
}

/**
  * @brief  Function to check that PLL can be modified
  * @param  PLL_InputFrequency  PLL input frequency (in Hz)
  * @param  UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
  *                             the configuration information for the PLL.
  * @retval PLL output frequency (in Hz)
  */
static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct)
{
  uint32_t pllfreq = 0U;

  /* Check the parameters */
  assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM));
  assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN));
  assert_param(IS_LL_UTILS_PLLP_VALUE(UTILS_PLLInitStruct->PLLP));
  
  /* Check different PLL parameters according to RM                          */
  /*  - PLLM: ensure that the VCO input frequency ranges from 0.95 to 2.1 MHz.   */
  pllfreq = PLL_InputFrequency / (UTILS_PLLInitStruct->PLLM & (RCC_PLLCFGR_PLLM >> RCC_PLLCFGR_PLLM_Pos));
  assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq));

  /*  - PLLN: ensure that the VCO output frequency is between 100 and 432 MHz.*/
  pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN & (RCC_PLLCFGR_PLLN >> RCC_PLLCFGR_PLLN_Pos));
  assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq));
  
  /*  - PLLP: ensure that max frequency at 216000000 Hz is reached     */
  pllfreq = pllfreq / (((UTILS_PLLInitStruct->PLLP >> RCC_PLLCFGR_PLLP_Pos) + 1) * 2);
  assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq));

  return pllfreq;
}

/**
  * @brief  Function to check that PLL can be modified
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: PLL modification can be done
  *          - ERROR: PLL is busy
  */
static ErrorStatus UTILS_PLL_IsBusy(void)
{
  ErrorStatus status = SUCCESS;

  /* Check if PLL is busy*/
  if(LL_RCC_PLL_IsReady() != 0U)
  {
    /* PLL configuration cannot be modified */
    status = ERROR;
  }

  /* Check if PLLSAI is busy*/
  if(LL_RCC_PLLSAI_IsReady() != 0U)
  {
    /* PLLSAI1 configuration cannot be modified */
    status = ERROR;
  }
  /* Check if PLLI2S is busy*/
  if(LL_RCC_PLLI2S_IsReady() != 0U)
  {
    /* PLLI2S configuration cannot be modified */
    status = ERROR;
  }
  return status;
}

/**
  * @brief  Function to enable PLL and switch system clock to PLL
  * @param  SYSCLK_Frequency SYSCLK frequency
  * @param  UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
  *                             the configuration information for the BUS prescalers.
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: No problem to switch system to PLL
  *          - ERROR: Problem to switch system to PLL
  */
static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
  ErrorStatus status = SUCCESS;
  uint32_t hclk_frequency = 0U;

  assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider));
  assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider));
  assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider));

  /* Calculate HCLK frequency */
  hclk_frequency = __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider);

  /* Increasing the number of wait states because of higher CPU frequency */
  if(SystemCoreClock < hclk_frequency)
  {
    /* Set FLASH latency to highest latency */
    status = UTILS_SetFlashLatency(hclk_frequency);
  }

  /* Update system clock configuration */
  if(status == SUCCESS)
  {
    /* Enable PLL */
    LL_RCC_PLL_Enable();
    while (LL_RCC_PLL_IsReady() != 1U)
    {
      /* Wait for PLL ready */
    }

    /* Sysclk activation on the main PLL */
    LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
    LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
    while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
    {
      /* Wait for system clock switch to PLL */
    }

    /* Set APB1 & APB2 prescaler*/
    LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider);
    LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider);
  }
    
  /* Decreasing the number of wait states because of lower CPU frequency */
  if(SystemCoreClock > hclk_frequency)
  {
    /* Set FLASH latency to lowest latency */
    status = UTILS_SetFlashLatency(hclk_frequency);
  }

  /* Update SystemCoreClock variable */
  if(status == SUCCESS)
  {
    LL_SetSystemCoreClock(hclk_frequency);
  }

  return status;
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/