/*
 * Copyright (C) 2020 Southern Storm Software, Pty Ltd.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 */

#ifndef LWCRYPTO_SPOOK_H
#define LWCRYPTO_SPOOK_H

#include "aead-common.h"

/**
 * \file spook.h
 * \brief Spook authenticated encryption algorithm.
 *
 * Spook is a family of authenticated encryption algorithms that are
 * built around a tweakable block cipher and a permutation.  If the
 * tweakable block cipher is implemented as a masked block cipher,
 * then Spook provides protection against power analysis side channels.
 *
 * There are four members in the Spook family:
 *
 * \li Spook-128-512-su with a 128-bit key, a 128-bit nonce, and a 128-bit tag.
 * Internally the algorithm uses a 512-bit permutation.  This is the primary
 * member of the family.
 * \li Spook-128-384-su with a 128-bit key, a 128-bit nonce, and a 128-bit tag.
 * Internally the algorithm uses a 384-bit permutation.
 * \li Spook-128-512-mu with a 128-bit key, a 128-bit public tweak, a 128-bit
 * nonce, and a 128-bit tag.  Internally the algorithm uses a 512-bit
 * permutation.
 * \li Spook-128-512-mu with a 128-bit key, a 128-bit public tweak, a 128-bit
 * nonce, and a 128-bit tag.  Internally the algorithm uses a 384-bit
 * permutation.
 *
 * In this library, the "mu" (multi-user) variants combine the 128-bit key
 * and the 128-bit public tweak into a single 256-bit key value.
 * Applications can either view this as a cipher with a 256-bit key,
 * or they can split the key value into secret and public halves.
 * Even with the use of 256-bit keys, Spook only has 128-bit security.
 *
 * References: https://www.spook.dev/
 */

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \brief Size of the key for the single-user version of Spook.
 */
#define SPOOK_SU_KEY_SIZE 16

/**
 * \brief Size of the key for the multi-user version of Spook.
 */
#define SPOOK_MU_KEY_SIZE 32

/**
 * \brief Size of the authentication tag for all Spook family members.
 */
#define SPOOK_TAG_SIZE 16

/**
 * \brief Size of the nonce for all Spook family members.
 */
#define SPOOK_NONCE_SIZE 16

/**
 * \brief Meta-information block for the Spook-128-512-su cipher.
 */
extern aead_cipher_t const spook_128_512_su_cipher;

/**
 * \brief Meta-information block for the Spook-128-384-su cipher.
 */
extern aead_cipher_t const spook_128_384_su_cipher;

/**
 * \brief Meta-information block for the Spook-128-512-mu cipher.
 */
extern aead_cipher_t const spook_128_512_mu_cipher;

/**
 * \brief Meta-information block for the Spook-128-384-mu cipher.
 */
extern aead_cipher_t const spook_128_384_mu_cipher;

/**
 * \brief Encrypts and authenticates a packet with Spook-128-512-su.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa spook_128_512_su_aead_decrypt()
 */
int spook_128_512_su_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with Spook-128-512-su.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa spook_128_512_su_aead_encrypt()
 */
int spook_128_512_su_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Encrypts and authenticates a packet with Spook-128-384-su.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa spook_128_384_su_aead_decrypt()
 */
int spook_128_384_su_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with Spook-128-384-su.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa spook_128_384_su_aead_encrypt()
 */
int spook_128_384_su_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Encrypts and authenticates a packet with Spook-128-512-mu.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 32 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa spook_128_512_mu_aead_decrypt()
 */
int spook_128_512_mu_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with Spook-128-512-mu.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 32 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa spook_128_512_mu_aead_encrypt()
 */
int spook_128_512_mu_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Encrypts and authenticates a packet with Spook-128-384-mu.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 32 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa spook_128_384_mu_aead_decrypt()
 */
int spook_128_384_mu_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with Spook-128-384-mu.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 32 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa spook_128_384_mu_aead_encrypt()
 */
int spook_128_384_mu_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

#ifdef __cplusplus
}
#endif

#endif