/*
 * Copyright (C) 2020 Southern Storm Software, Pty Ltd.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 */

#ifndef LWCRYPTO_ISAP_H
#define LWCRYPTO_ISAP_H

#include "aead-common.h"

/**
 * \file isap.h
 * \brief ISAP authenticated encryption algorithm.
 *
 * ISAP is a family of authenticated encryption algorithms that are built
 * around the Keccak-p[400] or ASCON permutations.  There are four algorithms
 * in the family, each of which have a 128-bit key, a 128-bit nonce, and a
 * 128-bit tag:
 *
 * \li ISAP-K-128A based around the Keccak-p[400] permutation with a
 * reduced number of rounds.  This is the primary member in the family.
 * \li ISAP-A-128A based around the ASCON permutation with a reduced
 * number of rounds.
 * \li ISAP-K-128 based around the Keccak-p[400] permutation.
 * \li ISAP-A-128 based around the ASCON permutation.
 *
 * ISAP is designed to provide some protection against adversaries
 * using differential power analysis to determine the key.  The
 * downside is that key setup is very slow.
 *
 * References: https://isap.iaik.tugraz.at/
 */

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \brief Size of the key for all ISAP family members.
 */
#define ISAP_KEY_SIZE 16

/**
 * \brief Size of the authentication tag for all ISAP family members.
 */
#define ISAP_TAG_SIZE 16

/**
 * \brief Size of the nonce for all ISAP family members.
 */
#define ISAP_NONCE_SIZE 16

/**
 * \brief Meta-information block for the ISAP-K-128A cipher.
 */
extern aead_cipher_t const isap_keccak_128a_cipher;

/**
 * \brief Meta-information block for the ISAP-A-128A cipher.
 */
extern aead_cipher_t const isap_ascon_128a_cipher;

/**
 * \brief Meta-information block for the ISAP-K-128 cipher.
 */
extern aead_cipher_t const isap_keccak_128_cipher;

/**
 * \brief Meta-information block for the ISAP-A-128 cipher.
 */
extern aead_cipher_t const isap_ascon_128_cipher;

/**
 * \brief Encrypts and authenticates a packet with ISAP-K-128A.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa isap_keccak_128a_aead_decrypt()
 */
int isap_keccak_128a_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with ISAP-K-128A.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa isap_keccak_128a_aead_encrypt()
 */
int isap_keccak_128a_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Encrypts and authenticates a packet with ISAP-A-128A.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa isap_ascon_128a_aead_decrypt()
 */
int isap_ascon_128a_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with ISAP-A-128A.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa isap_ascon_128a_aead_encrypt()
 */
int isap_ascon_128a_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Encrypts and authenticates a packet with ISAP-K-128.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa isap_keccak_128_aead_decrypt()
 */
int isap_keccak_128_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with ISAP-K-128.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa isap_keccak_128_aead_encrypt()
 */
int isap_keccak_128_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Encrypts and authenticates a packet with ISAP-A-128.
 *
 * \param c Buffer to receive the output.
 * \param clen On exit, set to the length of the output which includes
 * the ciphertext and the 16 byte authentication tag.
 * \param m Buffer that contains the plaintext message to encrypt.
 * \param mlen Length of the plaintext message in bytes.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to encrypt the packet.
 *
 * \return 0 on success, or a negative value if there was an error in
 * the parameters.
 *
 * \sa isap_ascon_128_aead_decrypt()
 */
int isap_ascon_128_aead_encrypt
    (unsigned char *c, unsigned long long *clen,
     const unsigned char *m, unsigned long long mlen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *nsec,
     const unsigned char *npub,
     const unsigned char *k);

/**
 * \brief Decrypts and authenticates a packet with ISAP-A-128.
 *
 * \param m Buffer to receive the plaintext message on output.
 * \param mlen Receives the length of the plaintext message on output.
 * \param nsec Secret nonce - not used by this algorithm.
 * \param c Buffer that contains the ciphertext and authentication
 * tag to decrypt.
 * \param clen Length of the input data in bytes, which includes the
 * ciphertext and the 16 byte authentication tag.
 * \param ad Buffer that contains associated data to authenticate
 * along with the packet but which does not need to be encrypted.
 * \param adlen Length of the associated data in bytes.
 * \param npub Points to the public nonce for the packet which must
 * be 16 bytes in length.
 * \param k Points to the 16 bytes of the key to use to decrypt the packet.
 *
 * \return 0 on success, -1 if the authentication tag was incorrect,
 * or some other negative number if there was an error in the parameters.
 *
 * \sa isap_ascon_128_aead_encrypt()
 */
int isap_ascon_128_aead_decrypt
    (unsigned char *m, unsigned long long *mlen,
     unsigned char *nsec,
     const unsigned char *c, unsigned long long clen,
     const unsigned char *ad, unsigned long long adlen,
     const unsigned char *npub,
     const unsigned char *k);

#ifdef __cplusplus
}
#endif

#endif